If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
BSOD ERROR = PNF List is Corrupt
Hello all periodically getting BSOD ERROR = PNF List is Corrupt?
Were & what actions are recommended to try resolving this issue? Running AMD 2400 Barton OC 1.97GH(XP 2600+), 2GB DDR400 K7 board with on board Video Xabre 200 WinXP pro, sp2. In Device manager under hidden Yellow? = IPv6 Windows Firewall Driver Yellow? = NT Port Library Driver I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. |
Ads |
#2
|
|||
|
|||
BSOD ERROR = PNF List is Corrupt
A possible culprit is the video driver. This is the most frequently cited
resolution on the web. I suggest that you download and reinstall the latest driver. If you are overclocking you should stop overclocking until this is resolved. "K Hunter" wrote in message ... Hello all periodically getting BSOD ERROR = PNF List is Corrupt? Were & what actions are recommended to try resolving this issue? Running AMD 2400 Barton OC 1.97GH(XP 2600+), 2GB DDR400 K7 board with on board Video Xabre 200 WinXP pro, sp2. In Device manager under hidden Yellow? = IPv6 Windows Firewall Driver Yellow? = NT Port Library Driver I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. |
#3
|
|||
|
|||
BSOD ERROR = PNF List is Corrupt
"K Hunter" wrote in message
... Hello all periodically getting BSOD ERROR = PNF List is Corrupt? Were & what actions are recommended to try resolving this issue? Running AMD 2400 Barton OC 1.97GH(XP 2600+), 2GB DDR400 K7 board with on board Video Xabre 200 WinXP pro, sp2. In Device manager under hidden Yellow? = IPv6 Windows Firewall Driver Yellow? = NT Port Library Driver I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. Other than PNF meaning "Page not found" which doesn't seem to apply, just what does "PNF" mean to you, or is that what the error actually says (which is doubtful as there is probably lots more that you haven't bothered to copy or reproduce verbatim for the error message)? Have you check the Event Viewer yet for warning or error messages? Under WHICH category (or type) are those devices you listed? They certainly don't sound like categories but rather are specific devices under some category. Any info provided regarding their driver details as to who wrote them and for what function they are used? Under the properties for the network connectoid that you use, did you actually install the "Microsoft TCP/IP version 6" protocol? |
#4
|
|||
|
|||
BSOD ERROR = PNF List is Corrupt
Background information on Stop Error message http://msdn2.microsoft.com/en-us/library/ms793247.aspx 0x0000004E: PFN_LIST_CORRUPT This indicates that the memory management Page File Number list is corrupted. Can be caused by corrupt physical RAM, or by drivers passing bad memory descriptor lists. Source: http://aumha.org/a/stop.htm Please post a copy of the Stop Error message. Disable automatic restart on system failure. This should help by allowing time to write down the STOP code properly. Right click on the My Computer icon on the Desktop and select Properties, Advanced, Start-Up and Recovery, System Failure and uncheck box before Automatically Restart. Do not re-enable automatic restart on system failure until you have resolved the problem. Check for variants of the Stop Error message. An alternative is to keep pressing the F8 key during Start-Up and select option - Disable automatic restart on system failure. If you are using a wireless keyboard and the F8 key does not work substitute a wired keyboard and mouse for this exercise only. -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ K Hunter wrote: Hello all periodically getting BSOD ERROR = PNF List is Corrupt? Were & what actions are recommended to try resolving this issue? Running AMD 2400 Barton OC 1.97GH(XP 2600+), 2GB DDR400 K7 board with on board Video Xabre 200 WinXP pro, sp2. In Device manager under hidden Yellow? = IPv6 Windows Firewall Driver Yellow? = NT Port Library Driver I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. |
#5
|
|||
|
|||
BSOD ERROR = PNF List is Corrupt
=?Utf-8?B?SyBIdW50ZXI=?= crashed
Echelon writing : Hello all periodically getting BSOD ERROR = PNF List is Corrupt? I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. This can be due to several things like bad hardware or debunk drivers. Myself, I last experienced this due to bad driver for Intel 2200BG Wifi card. -- Bjarke Andersen |
#6
|
|||
|
|||
BSOD ERROR = PFN List is Corrupt
Thank You Gerry
For seeing through my typos ATTENTION*** Correction is BSOD ERROR = "PFN_LIST_CORRUPT" *** STOP:0X0000004E (0X00000099,0X00044644,0X00000003,0X0000000) I Have Installed New Updated Drivers for my K7S7AG (V1.5A) Boards Video Card =Xabre GPU VGA driveWinXPv309 I found they have other newer Drivers for my other devices too, =IDE Driver V2.01.03 =LAN Driver 1.18a =Sound Driver V 046B02 =VGA Driver V 3.08 =USB 2.0 Driver V 1.05 =Modem Driver V 2.41.0033-4 And even Bios update "Bios V 30211, Bios V 030219" But one thing at a time! So far I have not had the dreaded BSOD Error’s again, but I will put my system through a stress test & see what transpires! Thanks again for all the speedy replies And thank you again Gerry For seeing through my bad penmanship! I Promise to be extra diligent with checking my typos from now on! As I do know the importance of CORRECTLY REPORTING OF ERRORS! Ken Hunter `````````````````````````````````````````````````` ```` `````````````````````````````````````````````````` ```` "Gerry" wrote: Background information on Stop Error message http://msdn2.microsoft.com/en-us/library/ms793247.aspx 0x0000004E: PFN_LIST_CORRUPT This indicates that the memory management Page File Number list is corrupted. Can be caused by corrupt physical RAM, or by drivers passing bad memory descriptor lists. Source: http://aumha.org/a/stop.htm Please post a copy of the Stop Error message. Disable automatic restart on system failure. This should help by allowing time to write down the STOP code properly. Right click on the My Computer icon on the Desktop and select Properties, Advanced, Start-Up and Recovery, System Failure and uncheck box before Automatically Restart. Do not re-enable automatic restart on system failure until you have resolved the problem. Check for variants of the Stop Error message. An alternative is to keep pressing the F8 key during Start-Up and select option - Disable automatic restart on system failure. If you are using a wireless keyboard and the F8 key does not work substitute a wired keyboard and mouse for this exercise only. -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ K Hunter wrote: Hello all periodically getting BSOD ERROR = PNF List is Corrupt? Were & what actions are recommended to try resolving this issue? Running AMD 2400 Barton OC 1.97GH(XP 2600+), 2GB DDR400 K7 board with on board Video Xabre 200 WinXP pro, sp2. In Device manager under hidden Yellow? = IPv6 Windows Firewall Driver Yellow? = NT Port Library Driver I can not find any other problems & have not updated to any new devices or software recently. Any insight would be greatly appreciated with this issue. |
Thread Tools | |
Display Modes | |
|
|