If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
"found.000"
Hi,
I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
Ads |
#2
|
|||
|
|||
"found.000"
"Access Denied" Error Message When You Try to Delete a File
http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#3
|
|||
|
|||
"found.000"
In addition to what Byte posted...
Chkdsk saves each repaired file in the root folder as a Filennnn.chk file, and each repaired folder in the root folder as a Found.nnn folder, where n is a number. Must be one messed up drive. -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#4
|
|||
|
|||
"found.000"
"Byte" wrote in message
... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#5
|
|||
|
|||
"found.000"
Carlos,
Read-only means nothing for folders. Only a file can be Read-only. The Read-only check box for folders is there for convenience, it allows you to change the Read-only attribute of all the files contained in that folder. --- [[Apply the read-only attribute to folder contents A folder itself cannot be made read-only. Nevertheless, the properties dialog box for a folder does include a read-only check box. You can use this check box to set or clear the read-only attribute for all existing files in the selected folder. This action has no bearing on files that you create subsequently. In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. To apply the read-only attribute to the contents of a folder, click the check box until a check mark appears. To clear the attribute, click the check box until it is empty. When you leave the dialog box, Windows asks whether you want to apply your action to subfolders and files. Be sure you select this option; if you select Apply Changes To This Folder Only, nothing at all happens.]] From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr [[Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs.]] [[The Read-only check box for folders is not available because it does not apply to the folder. You can use this check box to set the Read-only attribute for files in the folder.]] Cannot View or Change the Read-Only or System Attribute of Folders http://support.microsoft.com/kb/326549/ -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Byte" wrote in message ... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#6
|
|||
|
|||
"found.000"
"Wesley Vogel" wrote in message
... Carlos, Wesley, Read-only means nothing for folders. Only a file can be Read-only. The Read-only check box for folders is there for convenience, it allows you to change the Read-only attribute of all the files contained in that folder. --- That's completely new for me. All this years, I was convinced that a folder could be read-only. Guess one is never too old to learn. Thanks. [[Apply the read-only attribute to folder contents A folder itself cannot be made read-only. Nevertheless, the properties dialog box for a folder does include a read-only check box. You can use That's what has been confusing me for many years. this check box to set or clear the read-only attribute for all existing files in the selected folder. This action has no bearing on files that you create subsequently. In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. To apply the read-only attribute to the contents of a folder, click the check box until a check mark appears. To clear the attribute, click the check box until it is empty. When you leave the dialog box, Windows asks whether you want to apply your action to subfolders and files. Be sure you select this option; if you select Apply Changes To This I did select the checkbox to apply the changes to subfolders and files. But everytime I looked back into the folder "found.000", the subfolders and files were set back to read-only. Only performing a DOS command did definately reset the attributes for all the subfolders and its files. Don't ask me why I need to perform a good old DOS command in a DOS window to find a solutiion to this problem in the 21st century. I guess only Bill Gates knows why. -); Regards, Carlos Folder Only, nothing at all happens.]] From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr [[Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs.]] [[The Read-only check box for folders is not available because it does not apply to the folder. You can use this check box to set the Read-only attribute for files in the folder.]] Cannot View or Change the Read-Only or System Attribute of Folders http://support.microsoft.com/kb/326549/ -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Byte" wrote in message ... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#7
|
|||
|
|||
"found.000"
The HELP [?] button/What's This? explain it this way.
[[Specifies whether the files in this folder are read-only, which means that they cannot be changed or accidentally deleted. For multiple folders, if you select this check box all of the files in the folders will be read-only. If you clear the check box, none of the files in the selected folders will be read-only.]] Although attrib is similar to the DOS command, it is a Windows XP command. There is an MS-DOS attrib.exe that is similar to XP's attrib.exe, but they are not the same file. XP's dates from 2001, MS-DOS 6.22 dates from 1994. -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Wesley Vogel" wrote in message ... Carlos, Wesley, Read-only means nothing for folders. Only a file can be Read-only. The Read-only check box for folders is there for convenience, it allows you to change the Read-only attribute of all the files contained in that folder. --- That's completely new for me. All this years, I was convinced that a folder could be read-only. Guess one is never too old to learn. Thanks. [[Apply the read-only attribute to folder contents A folder itself cannot be made read-only. Nevertheless, the properties dialog box for a folder does include a read-only check box. You can use That's what has been confusing me for many years. this check box to set or clear the read-only attribute for all existing files in the selected folder. This action has no bearing on files that you create subsequently. In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. To apply the read-only attribute to the contents of a folder, click the check box until a check mark appears. To clear the attribute, click the check box until it is empty. When you leave the dialog box, Windows asks whether you want to apply your action to subfolders and files. Be sure you select this option; if you select Apply Changes To This I did select the checkbox to apply the changes to subfolders and files. But everytime I looked back into the folder "found.000", the subfolders and files were set back to read-only. Only performing a DOS command did definately reset the attributes for all the subfolders and its files. Don't ask me why I need to perform a good old DOS command in a DOS window to find a solutiion to this problem in the 21st century. I guess only Bill Gates knows why. -); Regards, Carlos Folder Only, nothing at all happens.]] From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr [[Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs.]] [[The Read-only check box for folders is not available because it does not apply to the folder. You can use this check box to set the Read-only attribute for files in the folder.]] Cannot View or Change the Read-Only or System Attribute of Folders http://support.microsoft.com/kb/326549/ -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Byte" wrote in message ... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#8
|
|||
|
|||
"found.000"
"Wesley Vogel" wrote in message
... The HELP [?] button/What's This? explain it this way. [[Specifies whether the files in this folder are read-only, which means that they cannot be changed or accidentally deleted. For multiple folders, if you select this check box all of the files in the folders will be read-only. If you clear the check box, none of the files in the selected folders will be read-only.]] Although attrib is similar to the DOS command, it is a Windows XP command. There is an MS-DOS attrib.exe that is similar to XP's attrib.exe, but they are not the same file. XP's dates from 2001, MS-DOS 6.22 dates from 1994. Sorry Wesley, my err. Since Windows 95, certain DOS commands are replaced by Windows (Command Prompt window) commands with a smilar name. Still, I dont understand why this particular problem (and maybe other similar problems) can only be helped with a command in the "Command Prompt" window. If Windows XP offers the possibility to change the file attributes in a folder and all the subfolders and files by clicking a checkbox, should it not be permanent like the Command Prompt window? Carlos -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Wesley Vogel" wrote in message ... Carlos, Wesley, Read-only means nothing for folders. Only a file can be Read-only. The Read-only check box for folders is there for convenience, it allows you to change the Read-only attribute of all the files contained in that folder. --- That's completely new for me. All this years, I was convinced that a folder could be read-only. Guess one is never too old to learn. Thanks. [[Apply the read-only attribute to folder contents A folder itself cannot be made read-only. Nevertheless, the properties dialog box for a folder does include a read-only check box. You can use That's what has been confusing me for many years. this check box to set or clear the read-only attribute for all existing files in the selected folder. This action has no bearing on files that you create subsequently. In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. To apply the read-only attribute to the contents of a folder, click the check box until a check mark appears. To clear the attribute, click the check box until it is empty. When you leave the dialog box, Windows asks whether you want to apply your action to subfolders and files. Be sure you select this option; if you select Apply Changes To This I did select the checkbox to apply the changes to subfolders and files. But everytime I looked back into the folder "found.000", the subfolders and files were set back to read-only. Only performing a DOS command did definately reset the attributes for all the subfolders and its files. Don't ask me why I need to perform a good old DOS command in a DOS window to find a solutiion to this problem in the 21st century. I guess only Bill Gates knows why. -); Regards, Carlos Folder Only, nothing at all happens.]] From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr [[Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs.]] [[The Read-only check box for folders is not available because it does not apply to the folder. You can use this check box to set the Read-only attribute for files in the folder.]] Cannot View or Change the Read-Only or System Attribute of Folders http://support.microsoft.com/kb/326549/ -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Byte" wrote in message ... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#9
|
|||
|
|||
"found.000"
Hi Carlos,
It doesn't matter what you do or how you do it. The Read-only check mark will be in the gray/green state for Folder Properties. You have to open the folder and look at the File Properties to really see what's what. I pay no attention to the state of the Read-only box on Folder Properties. As you can see, it's a waste of time. From my first post... [[In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. ]] Even if there is only one file in the folder. ;-) From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr Try this... Create a New Folder Open the New Folder Create a New Text Document inside that folder Close the New Folder Select New Folder Properties and change the Read-only check mark from gray/green to solid black Click Apply You get the Confirm Attribute Changes message [[You have chosen to make the following attribute changes: set read-only Apply changes to this folder, subfolders and files]] Click OK twice Open the folder and look at the Properties of the New Text Document.txt Read-only will be solid black Close New Text Document.txt Properties Close New Folder Select New Folder Properties and change the Read-only check mark from gray/green to clear Click Apply You get the Confirm Attribute Changes message [[You have chosen to make the following attribute changes: unset read-only Apply changes to this folder, subfolders and files]] Click OK twice Open the folder and look at the Properties of the New Text Document.txt Read-only will be clear ----- Confirm Attribute Changes ----- You have chosen to make the following attribute changes: set read-only or unset read-only Do you want to apply this change to this folder only, or do you want to apply it to all subfolders and files as well? 0 Apply changes to this folder only 0 Apply changes to this folder, subfolders and files ----- -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Wesley Vogel" wrote in message ... The HELP [?] button/What's This? explain it this way. [[Specifies whether the files in this folder are read-only, which means that they cannot be changed or accidentally deleted. For multiple folders, if you select this check box all of the files in the folders will be read-only. If you clear the check box, none of the files in the selected folders will be read-only.]] Although attrib is similar to the DOS command, it is a Windows XP command. There is an MS-DOS attrib.exe that is similar to XP's attrib.exe, but they are not the same file. XP's dates from 2001, MS-DOS 6.22 dates from 1994. Sorry Wesley, my err. Since Windows 95, certain DOS commands are replaced by Windows (Command Prompt window) commands with a smilar name. Still, I dont understand why this particular problem (and maybe other similar problems) can only be helped with a command in the "Command Prompt" window. If Windows XP offers the possibility to change the file attributes in a folder and all the subfolders and files by clicking a checkbox, should it not be permanent like the Command Prompt window? Carlos -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Wesley Vogel" wrote in message ... Carlos, Wesley, Read-only means nothing for folders. Only a file can be Read-only. The Read-only check box for folders is there for convenience, it allows you to change the Read-only attribute of all the files contained in that folder. --- That's completely new for me. All this years, I was convinced that a folder could be read-only. Guess one is never too old to learn. Thanks. [[Apply the read-only attribute to folder contents A folder itself cannot be made read-only. Nevertheless, the properties dialog box for a folder does include a read-only check box. You can use That's what has been confusing me for many years. this check box to set or clear the read-only attribute for all existing files in the selected folder. This action has no bearing on files that you create subsequently. In most cases, when you open the properties dialog box for a folder, the Read-Only check box will contain a green square. This indicates either a mixed or undetermined condition. Windows displays this green square because it would take too long to check the state of the read-only attribute for every file in the folder. To apply the read-only attribute to the contents of a folder, click the check box until a check mark appears. To clear the attribute, click the check box until it is empty. When you leave the dialog box, Windows asks whether you want to apply your action to subfolders and files. Be sure you select this option; if you select Apply Changes To This I did select the checkbox to apply the changes to subfolders and files. But everytime I looked back into the folder "found.000", the subfolders and files were set back to read-only. Only performing a DOS command did definately reset the attributes for all the subfolders and its files. Don't ask me why I need to perform a good old DOS command in a DOS window to find a solutiion to this problem in the 21st century. I guess only Bill Gates knows why. -); Regards, Carlos Folder Only, nothing at all happens.]] From... Microsoft Windows XP Inside Out Deluxe, Second Edition Author Ed Bott, Carl Siechert, Craig Stinson http://www.microsoft.com/products/in...fafbe&type=ovr [[Unlike the Read-only attribute for a file, the Read-only attribute for a folder is typically ignored by Windows, Windows components and accessories, and other programs.]] [[The Read-only check box for folders is not available because it does not apply to the folder. You can use this check box to set the Read-only attribute for files in the folder.]] Cannot View or Change the Read-Only or System Attribute of Folders http://support.microsoft.com/kb/326549/ -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Kanoknuan hunted and pecked: "Byte" wrote in message ... "Access Denied" Error Message When You Try to Delete a File http://support.microsoft.com/?kbid=298345 How to take ownership of a file or folder in Windows XP http://support.microsoft.com/default.aspx?scid=308421 Byte, Thanks for your help in this matter. Although the links you gave about "taking ownership of a file or a folder' was in the right direction, it was impossible to do that under Windows XP. Each time I tried to set the attributes to read/write and not nidden under Windows XP, the folder was set again to read-only by Windows making it impossible to perform any changes. I had to open a DOS Command Prompt Window, and reset the folder with "attrib -r -s -h -a". Apparently, Windows accepted this and from here I could take ownership and delete the folder. A note to the remarks of Wesley Vogel. This error (lost files) was due to a power failure while copying data from a CD. Windows showed a message that the "delayed write" failed and the lost files were all from that copy.. The external hard-disk is one of the best purchases I have ever made. It allows me to carry around 250 GB of data and programs like a portable, but only the size of a pocket book. Simly connect it to any computer with USB, and it is fully functional. Regards, Carlos " -- XP - WNP Today is the first day of the rest of your life. "Kanoknuan" wrote: Hi, I have an external USB Hard-Disk (250GB) connected to my computer. A week ago I decided to do a defragmenting of this disk. Windows XP needed to check this disk for error, and so I let Windows do it. After all was done, I was left with a directory named "found.000" and with files totalling over 10GB in that directory. When I tried to delete that directory to get back the useless disk space, I've got the following message: "Deleting File or Folder Cannot delete 13H_KIT: Access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use." The disk is far from being full (160GB unwritten) and as I write daily to that disk it is neither "write-protected". How can I delete this folder? TIA Matiyapak K. |
#10
|
|||
|
|||
"found.000"
Greetings,
Lost files can be restored using data recovery tools such as Active@ undelete or Uneraser. These are IMHO most powerful tools that should really help in a simmilar situation. http://www.active-undelete.com/ http://www.uneraser.com/ |
#11
|
|||
|
|||
"found.000"
Greetings !
"Wesley Vogel" wrote, 11/29/2005 5:00 PM PST Subject: "found.000" Chkdsk saves each repaired file in the root folder as a Filennnn.chk file, Yes. Up to 10,000 files, i.e. 0000 to 9999 and each repaired folder in the root folder as a Found.nnn folder, where n is a number. Are you SURE about that ??? My add-on hard disk has just screwed up, see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions on this very subject. I have Seven such FOUND.00n folders, most with 9,999 files in them which to me suggests that CHKDSK simply starts a new Folder when the current one is full. Must be one messed up drive. Sure is - hence my posting ! Regards Robin |
#12
|
|||
|
|||
"found.000"
see my posting at 2/25/2006 1:44 PM PST,
Subject: File Extensions No such post. http://groups.google.com/groups?q=au...06& safe=off& -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Robin Clay Robin_B DOT Clay AT virgin.net hunted and pecked: Greetings ! "Wesley Vogel" wrote, 11/29/2005 5:00 PM PST Subject: "found.000" Chkdsk saves each repaired file in the root folder as a Filennnn.chk file, Yes. Up to 10,000 files, i.e. 0000 to 9999 and each repaired folder in the root folder as a Found.nnn folder, where n is a number. Are you SURE about that ??? My add-on hard disk has just screwed up, see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions on this very subject. I have Seven such FOUND.00n folders, most with 9,999 files in them which to me suggests that CHKDSK simply starts a new Folder when the current one is full. Must be one messed up drive. Sure is - hence my posting ! Regards Robin |
#13
|
|||
|
|||
"found.000"
Ooopps !
Sorry - it was in microsoft.public.excel.programming Regards Robin "Wesley Vogel" wrote: see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions No such post. http://groups.google.com/groups?q=au...06& safe=off& -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Robin Clay Robin_B DOT Clay AT virgin.net hunted and pecked: Greetings ! "Wesley Vogel" wrote, 11/29/2005 5:00 PM PST Subject: "found.000" Chkdsk saves each repaired file in the root folder as a Filennnn.chk file, Yes. Up to 10,000 files, i.e. 0000 to 9999 and each repaired folder in the root folder as a Found.nnn folder, where n is a number. Are you SURE about that ??? My add-on hard disk has just screwed up, see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions on this very subject. I have Seven such FOUND.00n folders, most with 9,999 files in them which to me suggests that CHKDSK simply starts a new Folder when the current one is full. Must be one messed up drive. Sure is - hence my posting ! Regards Robin |
#14
|
|||
|
|||
"found.000"
Google groups had not picked it up yesterday.
It was at the top of the list today. http://groups.google.com/groups?q=au...006& safe=off File Extensions iya, Dave ! Long time no.... Thank you for responding, and offering your wisdom once more! I have saved your message and shall give it a go tomorrow. ... microsoft.public.excel.programming - Feb 25, 8:49 pm by Robin Clay - 2 messages - 2 authors http://groups.google.com/group/micro...91aede69981fa8 Have a look at this... Recover CHK Files http://www.ericphelps.com/uncheck/index.htm -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Robin Clay Robin_B DOT Clay AT virgin.net hunted and pecked: Ooopps ! Sorry - it was in microsoft.public.excel.programming Regards Robin "Wesley Vogel" wrote: see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions No such post. http://groups.google.com/groups?q=au...06& safe=off& -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , Robin Clay Robin_B DOT Clay AT virgin.net hunted and pecked: Greetings ! "Wesley Vogel" wrote, 11/29/2005 5:00 PM PST Subject: "found.000" Chkdsk saves each repaired file in the root folder as a Filennnn.chk file, Yes. Up to 10,000 files, i.e. 0000 to 9999 and each repaired folder in the root folder as a Found.nnn folder, where n is a number. Are you SURE about that ??? My add-on hard disk has just screwed up, see my posting at 2/25/2006 1:44 PM PST, Subject: File Extensions on this very subject. I have Seven such FOUND.00n folders, most with 9,999 files in them which to me suggests that CHKDSK simply starts a new Folder when the current one is full. Must be one messed up drive. Sure is - hence my posting ! Regards Robin |
#15
|
|||
|
|||
"found.000"
"Wesley Vogel" wrote:
Have a look at this... Recover CHK Files http://www.ericphelps.com/uncheck/index.htm Hope this helps. Let us know. It did, it DID ! Thank you very much. -- Regards Robin |
|
Thread Tools | |
Display Modes | |
|
|