A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Networking and the Internet with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Network Setup Wizard



 
 
Thread Tools Display Modes
  #16  
Old July 24th 04, 05:45 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Ok, we need to determine whether this is just a browsing issue or something
mo

1. On the XP Pro machine open a command prompt and type ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know there is
connectivity. If ping fails, there is a firewall or problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the files on the XP Pro's
C: drive or a logon window. If you get the logon window, enter an XP PRo
adminstrator's user name and password. If instead of the above, you get an
error message, the XP Pro machine is not creating administrative shares. On
the XP Pro machine, go to Administrative Tools/Services and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same workgroup -

System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I was
able to use Windows Explorer to "see" the laptop on the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop did
not work properly for some reason.

Can anyone help??

Craig



.



Ads
  #17  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #18  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #19  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #20  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #21  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #22  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #23  
Old July 24th 04, 05:45 AM
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro

machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which

matches the user name
and password used to log onto the XP Home machine. If

you don't use a
password in XP Home, create one or we'll have to change

more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Hello all;

I have two computers I'm trying to network. The

laptop is
running XP Pro and is connected driectly to a router.

The
desktop is running XP Home and is also connected

directly
to the router. Both machines work well with the

Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home

network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the

desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find

the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.

  #24  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #25  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #26  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #27  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #28  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #29  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



  #30  
Old July 24th 04, 05:49 AM
Doug Sherman [MVP]
external usenet poster
 
Posts: n/a
Default Network Setup Wizard

OK, we have connectivity and we can access shared resources.

Let's see if we have name resolution:

1. On XP Home, try Start Run: \\XPprocomputername\c$

If this works, we have name resolution.

2. If #1 did not work, does the XP Pro machine have a long name or a name
with unusual characters? If not, on XP Pro, open a command prompt and try:

'net stop browser' then 'net start browser'

wait a few minutes and try \\XPprocomputername\c$ on the XP Home machine
again.

3. If #1 worked, but you still cannot see the XP pro machine in My Network
Places, try:

'net stop browser' then 'net start browser' wait a few minutes and try
again

Let us know the results.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

wrote in message
...
Hi Doug,

4. I pinged the XP Pro machine from the XP Home machine --
pinged ok with no packet loss.

5. \\XP Pro's IP Address\c$ returned the C: drive
directory in a Windows Explorer window. I was able to
move a file from the XP Pro machine to the XP Home
machine, however, using the Windows Explorer on the XP
Home machine, I still cannot "see" the XP Pro machine.

Thanks again for your help.

Craig


-----Original Message-----
Ok, we need to determine whether this is just a browsing

issue or something
mo

1. On the XP Pro machine open a command prompt and type

ipconfig ENTER.

2. Write down the machine's IP address, type exit ENTER.

3. On the XP Home machine, open a command prompt and

type ping
XP'sIPaddress ENTER.

4. If you get a response with no packet loss, we know

there is
connectivity. If ping fails, there is a firewall or

problem with TCP/IP
configuration.

5. If ping worked, then on the XP Home machine click

Start Run;

\\XPproIPaddress\c$

You should either get an Explorer window showing the

files on the XP Pro's
C: drive or a logon window. If you get the logon window,

enter an XP PRo
adminstrator's user name and password. If instead of the

above, you get an
error message, the XP Pro machine is not creating

administrative shares. On
the XP Pro machine, go to Administrative Tools/Services

and try restarting
the Server service. Check Event Viewer for error.

Report back.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in

message
...
Thanks for the reply, Doug.

1. Firewalls on both machines are disabled.

2. Both computers are in same workgroup - confirmed.

3. User acct established on XP Pro machine that is
identical to user on XP Home machine.

Craig


-----Original Message-----
Try:

1. Make sure the firewall is not enabled on the XP Pro
machine.

2. Make sure both computers are in the same

workgroup -
System
properties/Computer name tab.

3. Create a user account on the XP Pro machine.which
matches the user name
and password used to log onto the XP Home machine. If
you don't use a
password in XP Home, create one or we'll have to change
more settings.

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP

"Craig" wrote in
message
...
Hello all;

I have two computers I'm trying to network. The
laptop is
running XP Pro and is connected driectly to a router.
The
desktop is running XP Home and is also connected
directly
to the router. Both machines work well with the
Internet,
so I don't suspect a problem with the router.

I was able to use Network Wizard to create a home
network
with the laptop. After the network was created, I

was
able to use Windows Explorer to "see" the laptop on

the
the network including any shared files and printers.

Now comes the problem. When I try to connect the
desktop
to the netwok using Network Wizard on that machine,
Windows Explorer on either machine CANNOT see or find
the
desktop. Apparantly, Network Wizard on the desktop

did
not work properly for some reason.

Can anyone help??

Craig


.



.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 01:28 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.