A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Windows XP Help and Support
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

East Asian Language



 
 
Thread Tools Display Modes
  #16  
Old January 20th 05, 12:09 PM
Mike2005
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!




Ads
  #17  
Old January 20th 05, 01:52 PM
Mark L. Ferguson
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

Some Policy seems to be in force. I would go to start/run, and type GPEDIT.MSC

I looked into it, and found one worth looking at:

Local policy/user config/admin templates/Control panel/regional ...."restrict selection of..."

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!






  #18  
Old January 21st 05, 06:03 PM
Mike2005
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

I have checked this as well, but it seems ok, still in "Not Configured".
Any other possibilities?

Thanks!
Mike

"Mark L. Ferguson" wrote:

Some Policy seems to be in force. I would go to start/run, and type GPEDIT.MSC

I looked into it, and found one worth looking at:

Local policy/user config/admin templates/Control panel/regional ...."restrict selection of..."

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!







  #19  
Old January 25th 05, 07:31 PM
Mike2005
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

Is there a standaline installation pack for the East Asian Language? e.g.,
wrapped in some exe files, not with the standard XP disk.

Thanks!
Mike

"Mark L. Ferguson" wrote:

Some Policy seems to be in force. I would go to start/run, and type GPEDIT.MSC

I looked into it, and found one worth looking at:

Local policy/user config/admin templates/Control panel/regional ...."restrict selection of..."

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!







  #20  
Old January 25th 05, 08:31 PM
Mark L. Ferguson
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

Multilingual Support: http://www.microsoft.com/windowsxp/p...ltilingual.asp


--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Is there a standaline installation pack for the East Asian Language? e.g.,
wrapped in some exe files, not with the standard XP disk.

Thanks!
Mike

"Mark L. Ferguson" wrote:

Some Policy seems to be in force. I would go to start/run, and type GPEDIT.MSC

I looked into it, and found one worth looking at:

Local policy/user config/admin templates/Control panel/regional ...."restrict selection of..."

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!









  #21  
Old January 26th 05, 04:31 PM
Mike2005
external usenet poster
 
Posts: n/a
Default Can't install East Asian Language

I have tried this one as well, and it did change the user interface language.
But it can't change the code page of the OS, and it annoys me because some
of my programs are not in unicode and they can't be display very well.
Maybe i have to reinstall the OS again.
Thanks anyway!

Mike

"Mark L. Ferguson" wrote:

Multilingual Support: http://www.microsoft.com/windowsxp/p...ltilingual.asp


--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Is there a standaline installation pack for the East Asian Language? e.g.,
wrapped in some exe files, not with the standard XP disk.

Thanks!
Mike

"Mark L. Ferguson" wrote:

Some Policy seems to be in force. I would go to start/run, and type GPEDIT.MSC

I looked into it, and found one worth looking at:

Local policy/user config/admin templates/Control panel/regional ...."restrict selection of..."

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message ...
Thanks!
It does not help, and the same symptom remains after applying SFC.
While doing the SFC, it does not prompt me to insert the installation CD.
I am wondering that the system files are intact, but some registry entry has
been changed by some "application program".
Any further insight?

Thanks anyway.


"Mark L. Ferguson" wrote:

To repair all system files, go to Start/Run, and type: SFC /SCANNOW

--

Mark L. Ferguson (NOT an MS-MVP)
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.txt
marfers notes for windows xp
http://www.geocities.com/marfer_mvp/chatNotes.htm
..
"Mike2005" wrote in message
...
I have a laptop with XP professional + SP2.
When i go to the "regional and language settings"-"Advacnced" Tab, both
the
pull-down list and "code page conversion table" are empty.
I tried to go to "Language" tab, and tick "install files for east asian
lanuage", then "Apply" or "OK", but it does not prompt me to insert CD.
What's wrong with it? Any possible solutions?

Thanks!










  #22  
Old April 30th 10, 08:27 AM posted to microsoft.public.windowsxp.help_and_support
nissapashya
external usenet poster
 
Posts: 1
Default East Asian Language

Hi
i have a same problem. i have been doing your instruction. but i have a
problem"cplexe.exe" is needed. its getting me have an headache. someone can
help me? please reply, and im sorry for my english

"Rick "Nutcase" Rogers" wrote:

Hi,

Ok, sorry for the abrupt response, it's hard to assess a readers level of
knowledge from only a few sentences, and I hate to type out long
instructions when they are not needed (yes, I'm lazy sometimes). First, set
folder options to see hidden and system folders. Go to the Control
Panel/Folder Options, and on the View tab, set the advanced options so you
can see hidden and system files. Specifically:

Enable (check) "Display the contents of system folders"
Enable (check) "Show hidden files and folders"
Disable (uncheck): "Hide protected operating system files (recommended)"

I also recommend that you disable (uncheck) "hide extensions for known file
types". Then open Windows Explorer to C:\Windows and see if there is an I386
folder here. You should also see on that is called ServicePackFiles if you
have installed either SP1 or SP2. If they are in these locations, continue
on. If not, you need to determine where they are before proceeding.

Now, click start/run and type regedit, click ok. Expand the plus (+) signs
to reach this key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Setup

Click on the setup folder so you can see the associated strings in the right
pane. Double-click on the one called sourcepath, you should see "C:\Windows"
(without the quotes) in the valuedata line, but you probably just see your
CD drive letter. Change it and click ok. Now check the
ServicePackSourcePath, it should read "c:\windows\ServicePackFiles" (again
without the quotes). It probably does, but if not you need to change this
one as well. Click ok, then close the registry editor.

Now retry adding the East Asian languages. What we've done here is to
redirect the system to look at the hard drive store of the system files
rather than prompting to insert the CD. Manufacturers like Gateway commonly
place the system files on the hard drive, the recovery CD is provided only
as a backup to reinstall the operating system and cannot be used like a
retail CD to add system components.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org

"I am crazy." I am wrote in message
...
Ok, just a parent here. Can you put that in non technical language? The
computer crashed on Saturday and we are trying to reload everything. My
Korean exchange student is anxious to get back online.

Michelle Buck

"Rick "Nutcase" Rogers" wrote:

Hi,

Click "cancel" when prompted to the insert the CD, then redirect to the
I386
folder on the system. You may need to change the sourcepath string in the
system registry.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org

"What? Am I crazy?" What? Am I wrote
in
message ...
I'm having the same problem. How do you "repoint the system"? I have
the
blue "Operating System Windows XP Home Edition" from Gateway. When I
try
to
load this, it says "cannot copy files"

Michelle Buck

"Rick "Nutcase" Rogers" wrote:

Hi,

Is this a regular CD or a System Restore disk? If the latter, you may
need
to repoint the system to the I386 folder on the hard drive.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org

"Kalec" wrote in message
...
I'm trying to install East Asian Language Pack and when it asks me
to
put
in
my XP CD, the files cannot be found. What can I do. Thank you.









 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing Regional Language Settings on WinXP Doomster General XP issues or comments 4 September 10th 04 10:42 PM
Windows XP and East Asian language pack Jordan Customizing Windows XP 3 August 27th 04 02:14 AM
"Language Bar" greyed out Super Duper Windows XP Help and Support 3 August 24th 04 03:41 AM
Language Bar doesn't show up marky star The Basics 1 August 19th 04 05:27 AM






All times are GMT +1. The time now is 10:39 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.