If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
editing XP registry through DOS?
or SHOUT!!!!!!
"Mark" wrote in message ... Thou shall not post in HTML!!!!!! -- Mark MCSA, CNA, A+, Net+, iNet+, Server+ "Vic Formosa" wrote in message ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
Ads |
#2
|
|||
|
|||
editing XP registry through DOS?
or SHOUT!!!!!!
"Mark" wrote in message ... Thou shall not post in HTML!!!!!! -- Mark MCSA, CNA, A+, Net+, iNet+, Server+ "Vic Formosa" wrote in message ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#3
|
|||
|
|||
editing XP registry through DOS?
or SHOUT!!!!!!
"Mark" wrote in message ... Thou shall not post in HTML!!!!!! -- Mark MCSA, CNA, A+, Net+, iNet+, Server+ "Vic Formosa" wrote in message ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#4
|
|||
|
|||
editing XP registry through DOS?
You posted this same question about 11 hours ago and were answered on
how to fix it. Find the original thread, and patience is a virtue. Vic Formosa wrote: By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#5
|
|||
|
|||
editing XP registry through DOS?
You posted this same question about 11 hours ago and were answered on
how to fix it. Find the original thread, and patience is a virtue. Vic Formosa wrote: By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#6
|
|||
|
|||
editing XP registry through DOS?
You posted this same question about 11 hours ago and were answered on
how to fix it. Find the original thread, and patience is a virtue. Vic Formosa wrote: By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#7
|
|||
|
|||
editing XP registry through DOS?
You posted this same question about 11 hours ago and were answered on
how to fix it. Find the original thread, and patience is a virtue. Vic Formosa wrote: By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#8
|
|||
|
|||
editing XP registry through DOS?
You posted this same question about 11 hours ago and were answered on
how to fix it. Find the original thread, and patience is a virtue. Vic Formosa wrote: By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#9
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#10
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#11
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#12
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#13
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#14
|
|||
|
|||
editing XP registry through DOS?
Windows XP is not based on MS-DOS, therefore there is no
DOS to boot into. How to Perform a Windows XP Repair Install http://www.michaelstevenstech.com/XPrepairinstall.htm [Courtesy of MS-MVP Michael Stevens] -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ -------------------------------------------------------------------------------------- "Vic Formosa" wrote in message: ... By mistake, while trying to reconfigure some bootup and shut down problems I changed the settings in the registry that now when I turn on my comp and log in on my administrator user password the computer shuts down and reboots again to the point where the user password is required for me to reenter my password, only to shut down and reboot by itself again...time and time repeatedly. I think know where the error lies, but can not access if because I can not get past my log in point. Even if I try loggin in through safe mode and using my disk to start up, this problem still occurs whenever windows boots up. However I don't have this problem using DOS after I insert my floppy boot disk...so is there a way that I can change my settings to the registry from DOS? Please e-mail me, because I don't see any info on this on the net or if it is, I certainly don't understand it. Here is the problem - The registry settings in the bootup and shut down settings I believe they are located in the hkusers/users/sofyware /microsoft/windows/current version/explorer shutdown key. I know that I changed a hey value what was a 0 to a 1 when it shouldn't have and now when I boot up, I get as far as logging in with my password and then the system begins to bring up the desktop and automatically shuts down and reboots to the Windows log in screen where I enter the password again only to have the screen automatically shut down and boot back up to where I enter the password and it shuts down again. EXAMPLE: I turn on the comp. I get my IBM screen Windows begins to load Login and Password screen comes up I type on password and hit return Windows shuts down and reboots to start all over. I can't start in safe mode. I can't start with cd and I don't know what to look for when I am in dos or how to go about finding the registy from Dos. I have all my disks but I don't know what to type in at the c:\ prompt becuase REGEDIT doesn't work and EDIT doesn't open anything. |
#15
|
|||
|
|||
editing XP registry through DOS?
In the above post:
copy c:\windows\system32\config\software c:\windows\system32\config\software.sav Should appear all on one line (it is a single command). Place a space between the part on the first line and the part on the second line. My original post "wrapped". Jef |
Thread Tools | |
Display Modes | |
|
|