If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WinXP SP2 download
I just downloaded to my computer hard drive, a copy of WindowsXP SP2 (266mg)
from the Microsoft website. I haven't tried to install it but am about to copy it to a CD. My WindowsXP CD (496mg) that I got with my computer is about 2 years old. If I reformat my HD, would it better to use the later CD I made from the download, instead of the older one? -- Sincerely, Jack Nation |
Ads |
#2
|
|||
|
|||
You cannot install WinXP from the SP2 download.
-- Frank Saunders, MS-MVP, IE/OE Please respond in Newsgroup. Do not send email http://www.fjsmjs.com Protect your PC http://www.microsoft.com/security/protect/ "Jack Nation" wrote in message ... I just downloaded to my computer hard drive, a copy of WindowsXP SP2 (266mg) from the Microsoft website. I haven't tried to install it but am about to copy it to a CD. My WindowsXP CD (496mg) that I got with my computer is about 2 years old. If I reformat my HD, would it better to use the later CD I made from the download, instead of the older one? -- Sincerely, Jack Nation |
#3
|
|||
|
|||
Jack
What you downloaded was the SP2 service pack, the full unabridged version.. after loading XP from your original CD, you can then install SP2 from the CD that you are about to make.. -- Mike Hall MVP - Windows Shell/User "Jack Nation" wrote in message ... I just downloaded to my computer hard drive, a copy of WindowsXP SP2 (266mg) from the Microsoft website. I haven't tried to install it but am about to copy it to a CD. My WindowsXP CD (496mg) that I got with my computer is about 2 years old. If I reformat my HD, would it better to use the later CD I made from the download, instead of the older one? -- Sincerely, Jack Nation |
#4
|
|||
|
|||
Thanks for your help Frank & Mike.
-- Sincerely, Jack Nation "Mike Hall (MS-MVP)" wrote in message ... Jack What you downloaded was the SP2 service pack, the full unabridged version.. after loading XP from your original CD, you can then install SP2 from the CD that you are about to make.. -- Mike Hall MVP - Windows Shell/User "Jack Nation" wrote in message ... I just downloaded to my computer hard drive, a copy of WindowsXP SP2 (266mg) from the Microsoft website. I haven't tried to install it but am about to copy it to a CD. My WindowsXP CD (496mg) that I got with my computer is about 2 years old. If I reformat my HD, would it better to use the later CD I made from the download, instead of the older one? -- Sincerely, Jack Nation |
#5
|
|||
|
|||
Create a slipstream CD using your Windows XP CD and the SP2 download. It is
easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm -- Harry Ohrn MS-MVP [Shell/User] www.webtree.ca/windowsxp "Jack Nation" wrote in message ... I just downloaded to my computer hard drive, a copy of WindowsXP SP2 (266mg) from the Microsoft website. I haven't tried to install it but am about to copy it to a CD. My WindowsXP CD (496mg) that I got with my computer is about 2 years old. If I reformat my HD, would it better to use the later CD I made from the download, instead of the older one? -- Sincerely, Jack Nation |
#6
|
|||
|
|||
"Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ |
#7
|
|||
|
|||
~ FreeSpirit ~ wrote:
"Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ It depends on what the OEM has given you. Check with HP's tech support. If you have only a restore image, you can't slipstream it. Sometimes you can slipstream using the i386 folder on the hard drive if the OEM set it up that way. Otherwise, you are SOL. You can check out the links that the following Google search produced for possibilities: http://www.google.com/search?q=slips...arch&hl=en&lr= Malke -- MS-MVP Windows User/Shell Elephant Boy Computers www.elephantboycomputers.com "Don't Panic" |
#8
|
|||
|
|||
This is a constant source of frustration for me, and I'm wondering (hoping)
if someone has a suggestion that is straight forward that I can use. I continually find myself in this situation: I'm "the computer guy" to my friends and family, although, I'm just a lowly a Access Application Analyst with very little experience with Windows configuration... Until I got on Cox Highspeed internet, and descovered quickly that I don't know squat about my hardware and software environment and find my self increasingly baried in help files trying to figure things out. So I get the call from one of my friends who can't get on the internet to run their business or whatever, or they can't boot up. So I go there and find all kinds of problems... Way too much software, spyware infestation, viruses, myriad problems that I've spent countless days nights weekends endlessly searching for answers that never seem to come easy enough... So in these situations, when it't "THAT BAD" I suggest a clean install, as I've done this many times and it used to go smoothly, until XP and Automatic Updates. Now it seems every time I try to run the setup from the OEM disk or whatever they have, I end up in a loop of error messages asking for a disk the PC owner never had, because the file being looked for was installed by an update. "Fatal Error! Setup can not continue. Please insert the Window XP SP1 CD to coninue setup." but there is no service pack 1, the files may be on the disk, but I don't know where, and at this juncture, setup seems to have gone to the point of no return, as it just keeps looping back to the setup program and to the same error... The big problem, and excruciatingly time consuming, is that these users have one household PC, it isn't operational, and they are completly helpless... So I go home, get on the MS Sites and start trying to find help. I go to the manufacturers sites and try to find help. But it always expends massive amounts of time, as no one seems to have a Service Pack 1 (or whatever it is being asked for at the moment) and Microsoft tells me I have to go to the manufacturer for help. Isn't there a license friendly solution for me to help my friends (like I want to make a CD or two that contains the various Service Packs) but unless I am missinformed, I'm not allowed to do this because of license issues or complience validation or something... Sorry for being so wordy, but I'm going through this nightmare again, and I'm just kinda frustrated... don't mean to vent, I just keep thinking, Microsoft put the file on there, why can't I get the file I need from microsoft, so everyone can go about there business and be happy :-) Much Thanks in advance -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks… "Malke" wrote: ~ FreeSpirit ~ wrote: "Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ It depends on what the OEM has given you. Check with HP's tech support. If you have only a restore image, you can't slipstream it. Sometimes you can slipstream using the i386 folder on the hard drive if the OEM set it up that way. Otherwise, you are SOL. You can check out the links that the following Google search produced for possibilities: http://www.google.com/search?q=slips...arch&hl=en&lr= Malke -- MS-MVP Windows User/Shell Elephant Boy Computers www.elephantboycomputers.com "Don't Panic" |
#9
|
|||
|
|||
Here are some solutions that I use. (I've number them to keep them separated
not order of preference) 1) You can legally download full versions of the Service packs from Microsoft and burn them to CD. It is totally acceptable to transfer these to other computers SP1a click "Go" button here http://www.microsoft.com/windowsxp/d...1/network.mspx SP2 click "Download" button here http://www.microsoft.com/downloads/d...displaylang=en 2) Create a Bart's PE CD. This is a excellent tool as it is an operating system that runs entirely off the CD and, if you install the correct plug-ins, it gives you the ability to go online and download drivers and find help information, etc or gain access to a network. My version of Bart's PE contains Nero, Ghost 8, Firefox, Stinger, Keyfinder-pe, IrfranView, Ad-Aware, WinZip, as well as a number of other handy tools such as password crackers and file recovery tools. The learning curve isn't even that steep and once you have one of these you'll wonder what you did without it. http://www.nu2.nu/pebuilder/ 3) While it is true that you cannot use your Product Key to install Windows on other computers you can still create a slipstream version of XP using your disc providing that when you install it on another system you use that person's Product Key. However be aware that Product Keys are version specific. XP Home keys won't work with XP Pro. Nor will XP Home or XP Pro "Retail keys" work on XP Home or XP Pro "OEM" versions. Still if you have friends who call on you often you can legally use their XP CD and a Service Pack to create a slipstream version for them to keep with their system in the event you need to help them. Slipstream instructions found here http://www.webtree.ca/windowsxp/slipstream.htm 4) Create a CD with commonly used Anti-spyware apps. The essentials are found here http://aumha.org/a/parasite.htm Just keep them up-to-date 5) If you are in the habit of helping friends and family start charging a small fee. It doesn't have to be exorbitant. This encourages people to be more responsible and helps you to offset the cost of travel and wear and tear on your resources. -- Harry Ohrn MS-MVP [Shell/User] www.webtree.ca/windowsxp "Rev" .(OrSomeThingLikeThat ) wrote in message ... This is a constant source of frustration for me, and I'm wondering (hoping) if someone has a suggestion that is straight forward that I can use. I continually find myself in this situation: I'm "the computer guy" to my friends and family, although, I'm just a lowly a Access Application Analyst with very little experience with Windows configuration... Until I got on Cox Highspeed internet, and descovered quickly that I don't know squat about my hardware and software environment and find my self increasingly baried in help files trying to figure things out. So I get the call from one of my friends who can't get on the internet to run their business or whatever, or they can't boot up. So I go there and find all kinds of problems... Way too much software, spyware infestation, viruses, myriad problems that I've spent countless days nights weekends endlessly searching for answers that never seem to come easy enough... So in these situations, when it't "THAT BAD" I suggest a clean install, as I've done this many times and it used to go smoothly, until XP and Automatic Updates. Now it seems every time I try to run the setup from the OEM disk or whatever they have, I end up in a loop of error messages asking for a disk the PC owner never had, because the file being looked for was installed by an update. "Fatal Error! Setup can not continue. Please insert the Window XP SP1 CD to coninue setup." but there is no service pack 1, the files may be on the disk, but I don't know where, and at this juncture, setup seems to have gone to the point of no return, as it just keeps looping back to the setup program and to the same error... The big problem, and excruciatingly time consuming, is that these users have one household PC, it isn't operational, and they are completly helpless... So I go home, get on the MS Sites and start trying to find help. I go to the manufacturers sites and try to find help. But it always expends massive amounts of time, as no one seems to have a Service Pack 1 (or whatever it is being asked for at the moment) and Microsoft tells me I have to go to the manufacturer for help. Isn't there a license friendly solution for me to help my friends (like I want to make a CD or two that contains the various Service Packs) but unless I am missinformed, I'm not allowed to do this because of license issues or complience validation or something... Sorry for being so wordy, but I'm going through this nightmare again, and I'm just kinda frustrated... don't mean to vent, I just keep thinking, Microsoft put the file on there, why can't I get the file I need from microsoft, so everyone can go about there business and be happy :-) Much Thanks in advance -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks. "Malke" wrote: ~ FreeSpirit ~ wrote: "Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ It depends on what the OEM has given you. Check with HP's tech support. If you have only a restore image, you can't slipstream it. Sometimes you can slipstream using the i386 folder on the hard drive if the OEM set it up that way. Otherwise, you are SOL. You can check out the links that the following Google search produced for possibilities: http://www.google.com/search?q=slips...arch&hl=en&lr= Malke -- MS-MVP Windows User/Shell Elephant Boy Computers www.elephantboycomputers.com "Don't Panic" |
#10
|
|||
|
|||
Now that's what I'm talkin' about!
Thanks Harry for your time and consideration I will definately follow your instructions today. With respect to two of you comments. A. I won't have to wonder what I ever did without it. This little project is my third painful experience "without it" That helpless feeling lasts at least a couple months till new tools or successes provide the rebound... B. So far as charging a nominal fee, that is surely good advice. I bought MSDN Universal and I'm trying very hard to elevate to a higher plain of competence, so I can charge some real money... I ask for "whatever you can give me" or $50. I also provide a receipt which lists all of the things I did and the associated charges, and call it at limited time "Business Startup" offer. I think I can account this to marketing and right some of that time expense off as "Discounts." I'm not sure... Thanks again Harry! I'm gonna start working on this right now. -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks… "Harry Ohrn" wrote: Here are some solutions that I use. (I've number them to keep them separated not order of preference) 1) You can legally download full versions of the Service packs from Microsoft and burn them to CD. It is totally acceptable to transfer these to other computers SP1a click "Go" button here http://www.microsoft.com/windowsxp/d...1/network.mspx SP2 click "Download" button here http://www.microsoft.com/downloads/d...displaylang=en 2) Create a Bart's PE CD. This is a excellent tool as it is an operating system that runs entirely off the CD and, if you install the correct plug-ins, it gives you the ability to go online and download drivers and find help information, etc or gain access to a network. My version of Bart's PE contains Nero, Ghost 8, Firefox, Stinger, Keyfinder-pe, IrfranView, Ad-Aware, WinZip, as well as a number of other handy tools such as password crackers and file recovery tools. The learning curve isn't even that steep and once you have one of these you'll wonder what you did without it. http://www.nu2.nu/pebuilder/ 3) While it is true that you cannot use your Product Key to install Windows on other computers you can still create a slipstream version of XP using your disc providing that when you install it on another system you use that person's Product Key. However be aware that Product Keys are version specific. XP Home keys won't work with XP Pro. Nor will XP Home or XP Pro "Retail keys" work on XP Home or XP Pro "OEM" versions. Still if you have friends who call on you often you can legally use their XP CD and a Service Pack to create a slipstream version for them to keep with their system in the event you need to help them. Slipstream instructions found here http://www.webtree.ca/windowsxp/slipstream.htm 4) Create a CD with commonly used Anti-spyware apps. The essentials are found here http://aumha.org/a/parasite.htm Just keep them up-to-date 5) If you are in the habit of helping friends and family start charging a small fee. It doesn't have to be exorbitant. This encourages people to be more responsible and helps you to offset the cost of travel and wear and tear on your resources. -- Harry Ohrn MS-MVP [Shell/User] www.webtree.ca/windowsxp "Rev" .(OrSomeThingLikeThat ) wrote in message ... This is a constant source of frustration for me, and I'm wondering (hoping) if someone has a suggestion that is straight forward that I can use. I continually find myself in this situation: I'm "the computer guy" to my friends and family, although, I'm just a lowly a Access Application Analyst with very little experience with Windows configuration... Until I got on Cox Highspeed internet, and descovered quickly that I don't know squat about my hardware and software environment and find my self increasingly baried in help files trying to figure things out. So I get the call from one of my friends who can't get on the internet to run their business or whatever, or they can't boot up. So I go there and find all kinds of problems... Way too much software, spyware infestation, viruses, myriad problems that I've spent countless days nights weekends endlessly searching for answers that never seem to come easy enough... So in these situations, when it't "THAT BAD" I suggest a clean install, as I've done this many times and it used to go smoothly, until XP and Automatic Updates. Now it seems every time I try to run the setup from the OEM disk or whatever they have, I end up in a loop of error messages asking for a disk the PC owner never had, because the file being looked for was installed by an update. "Fatal Error! Setup can not continue. Please insert the Window XP SP1 CD to coninue setup." but there is no service pack 1, the files may be on the disk, but I don't know where, and at this juncture, setup seems to have gone to the point of no return, as it just keeps looping back to the setup program and to the same error... The big problem, and excruciatingly time consuming, is that these users have one household PC, it isn't operational, and they are completly helpless... So I go home, get on the MS Sites and start trying to find help. I go to the manufacturers sites and try to find help. But it always expends massive amounts of time, as no one seems to have a Service Pack 1 (or whatever it is being asked for at the moment) and Microsoft tells me I have to go to the manufacturer for help. Isn't there a license friendly solution for me to help my friends (like I want to make a CD or two that contains the various Service Packs) but unless I am missinformed, I'm not allowed to do this because of license issues or complience validation or something... Sorry for being so wordy, but I'm going through this nightmare again, and I'm just kinda frustrated... don't mean to vent, I just keep thinking, Microsoft put the file on there, why can't I get the file I need from microsoft, so everyone can go about there business and be happy :-) Much Thanks in advance -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks. "Malke" wrote: ~ FreeSpirit ~ wrote: "Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ It depends on what the OEM has given you. Check with HP's tech support. If you have only a restore image, you can't slipstream it. Sometimes you can slipstream using the i386 folder on the hard drive if the OEM set it up that way. Otherwise, you are SOL. You can check out the links that the following Google search produced for possibilities: http://www.google.com/search?q=slips...arch&hl=en&lr= Malke -- MS-MVP Windows User/Shell Elephant Boy Computers www.elephantboycomputers.com "Don't Panic" |
#11
|
|||
|
|||
Good luck on your business endeavour. Right now is a good time to make money
on spyware removal and system cleanups. I have a 200 GB drive in a USB hard drive enclosure. I create a full system backup of a clients' system with it using Ghost 8. Then I can work on their system to my heart's content. Once I get it cleaned I create a final image and burn to CD or DVD which I give to the client. If I need to get them back to the clean date I can do that. -- Harry Ohrn MS-MVP [Shell/User] www.webtree.ca/windowsxp "Rev" .(OrSomeThingLikeThat ) wrote in message ... Now that's what I'm talkin' about! Thanks Harry for your time and consideration I will definately follow your instructions today. With respect to two of you comments. A. I won't have to wonder what I ever did without it. This little project is my third painful experience "without it" That helpless feeling lasts at least a couple months till new tools or successes provide the rebound... B. So far as charging a nominal fee, that is surely good advice. I bought MSDN Universal and I'm trying very hard to elevate to a higher plain of competence, so I can charge some real money... I ask for "whatever you can give me" or $50. I also provide a receipt which lists all of the things I did and the associated charges, and call it at limited time "Business Startup" offer. I think I can account this to marketing and right some of that time expense off as "Discounts." I'm not sure... Thanks again Harry! I'm gonna start working on this right now. -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks. "Harry Ohrn" wrote: Here are some solutions that I use. (I've number them to keep them separated not order of preference) 1) You can legally download full versions of the Service packs from Microsoft and burn them to CD. It is totally acceptable to transfer these to other computers SP1a click "Go" button here http://www.microsoft.com/windowsxp/d...1/network.mspx SP2 click "Download" button here http://www.microsoft.com/downloads/d...displaylang=en 2) Create a Bart's PE CD. This is a excellent tool as it is an operating system that runs entirely off the CD and, if you install the correct plug-ins, it gives you the ability to go online and download drivers and find help information, etc or gain access to a network. My version of Bart's PE contains Nero, Ghost 8, Firefox, Stinger, Keyfinder-pe, IrfranView, Ad-Aware, WinZip, as well as a number of other handy tools such as password crackers and file recovery tools. The learning curve isn't even that steep and once you have one of these you'll wonder what you did without it. http://www.nu2.nu/pebuilder/ 3) While it is true that you cannot use your Product Key to install Windows on other computers you can still create a slipstream version of XP using your disc providing that when you install it on another system you use that person's Product Key. However be aware that Product Keys are version specific. XP Home keys won't work with XP Pro. Nor will XP Home or XP Pro "Retail keys" work on XP Home or XP Pro "OEM" versions. Still if you have friends who call on you often you can legally use their XP CD and a Service Pack to create a slipstream version for them to keep with their system in the event you need to help them. Slipstream instructions found here http://www.webtree.ca/windowsxp/slipstream.htm 4) Create a CD with commonly used Anti-spyware apps. The essentials are found here http://aumha.org/a/parasite.htm Just keep them up-to-date 5) If you are in the habit of helping friends and family start charging a small fee. It doesn't have to be exorbitant. This encourages people to be more responsible and helps you to offset the cost of travel and wear and tear on your resources. -- Harry Ohrn MS-MVP [Shell/User] www.webtree.ca/windowsxp "Rev" .(OrSomeThingLikeThat ) wrote in message ... This is a constant source of frustration for me, and I'm wondering (hoping) if someone has a suggestion that is straight forward that I can use. I continually find myself in this situation: I'm "the computer guy" to my friends and family, although, I'm just a lowly a Access Application Analyst with very little experience with Windows configuration... Until I got on Cox Highspeed internet, and descovered quickly that I don't know squat about my hardware and software environment and find my self increasingly baried in help files trying to figure things out. So I get the call from one of my friends who can't get on the internet to run their business or whatever, or they can't boot up. So I go there and find all kinds of problems... Way too much software, spyware infestation, viruses, myriad problems that I've spent countless days nights weekends endlessly searching for answers that never seem to come easy enough... So in these situations, when it't "THAT BAD" I suggest a clean install, as I've done this many times and it used to go smoothly, until XP and Automatic Updates. Now it seems every time I try to run the setup from the OEM disk or whatever they have, I end up in a loop of error messages asking for a disk the PC owner never had, because the file being looked for was installed by an update. "Fatal Error! Setup can not continue. Please insert the Window XP SP1 CD to coninue setup." but there is no service pack 1, the files may be on the disk, but I don't know where, and at this juncture, setup seems to have gone to the point of no return, as it just keeps looping back to the setup program and to the same error... The big problem, and excruciatingly time consuming, is that these users have one household PC, it isn't operational, and they are completly helpless... So I go home, get on the MS Sites and start trying to find help. I go to the manufacturers sites and try to find help. But it always expends massive amounts of time, as no one seems to have a Service Pack 1 (or whatever it is being asked for at the moment) and Microsoft tells me I have to go to the manufacturer for help. Isn't there a license friendly solution for me to help my friends (like I want to make a CD or two that contains the various Service Packs) but unless I am missinformed, I'm not allowed to do this because of license issues or complience validation or something... Sorry for being so wordy, but I'm going through this nightmare again, and I'm just kinda frustrated... don't mean to vent, I just keep thinking, Microsoft put the file on there, why can't I get the file I need from microsoft, so everyone can go about there business and be happy :-) Much Thanks in advance -- Everything in EXCESS!!! If you want to taste the flavor of LIFE, Take BIG Bytes. Moderation is for monks. "Malke" wrote: ~ FreeSpirit ~ wrote: "Harry Ohrn" wrote in message ... Create a slipstream CD using your Windows XP CD and the SP2 download. It is easy to do - see here http://www.webtree.ca/windowsxp/slipstream.htm =================== What about those of us who don't get the XP-CD when we buy our PCs? I have several CDs to reinstall WXP from HP. FS~ It depends on what the OEM has given you. Check with HP's tech support. If you have only a restore image, you can't slipstream it. Sometimes you can slipstream using the i386 folder on the hard drive if the OEM set it up that way. Otherwise, you are SOL. You can check out the links that the following Google search produced for possibilities: http://www.google.com/search?q=slips...arch&hl=en&lr= Malke -- MS-MVP Windows User/Shell Elephant Boy Computers www.elephantboycomputers.com "Don't Panic" |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clean install of WinXP SP2 Home Upgrade CD | DZyner | Windows Service Pack 2 | 3 | November 2nd 04 11:00 AM |
cannot read cdroms after installing winXP SP2 | Nabil | Hardware and Windows XP | 0 | October 23rd 04 02:43 AM |
Problem with installing WinXP Pro (SP2) | DeadSet | Windows Service Pack 2 | 4 | October 19th 04 08:52 PM |
SP2 Boot failure, system freeze, AGPCPQ.SYS, AGP440.SYS lock-ups. | Trebor | Windows Service Pack 2 | 2 | October 19th 04 07:55 PM |
SP2 Boot failure, system freeze, AGPCPQ.SYS, AGP440.SYS lock-ups. | Trebor | Windows XP Help and Support | 0 | October 19th 04 07:35 PM |