If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Large list, Important Updates??
Now for several weeks I have a list of over 50 “Important Updates”. In
the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? |
Ads |
#2
|
|||
|
|||
Large list, Important Updates??
On 08/26/2016 04:19 PM, Geri wrote:
Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Somewhere along the line Windows 7 became reallllly slow for updates. It seems to be a known issue now and MS has even issued patches for it. https://support.microsoft.com/en-us/kb/3102810 If you kept your PC FULLY updates with recommended and optional updates it would fix its self. I just loaded my sister's machine yesterday and it's taking for ever to download, hours plus. And I gave up. I downloaded the Offline installer for SP1 to at least get those updates, but it's not in SP1, it's someplace after. If you google "windows 7 update is slow" you'll get more hints and ideas than you probably have time to research. The issue I had is so many of them want you to get them from windows update.... duh.... that's the issue. And I downloaded some that looked like stand alone but all I got was "searching windows update..." which seems to me to put me right back where I was. I've given up till I have time to just let it run for 12 hours. I did that on my VM, I started it and went to bed. It was ready when I woke. :-) |
#3
|
|||
|
|||
Large list, Important Updates??
Geri wrote:
Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Take a picture of the large list, and post it here. Try the "clippingtool" in your OS, to take a screen shot. Save as PNG. On the following web page... Select "Do not resize my image". Select "Family Safe". Then click "Choose Image". https://postimage.org/index.php?um=flash The hardest part, is selecting the correct URL, the middle part of the forum link, for inclusion in your next post. Do *not* select the thumbnail link, as the picture is too small. Paul |
#4
|
|||
|
|||
Large list, Important Updates??
Paul wrote in :
Geri wrote: Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Take a picture of the large list, and post it here. Try the "clippingtool" in your OS, to take a screen shot. Save as PNG. On the following web page... Select "Do not resize my image". Select "Family Safe". Then click "Choose Image". https://postimage.org/index.php?um=flash The hardest part, is selecting the correct URL, the middle part of the forum link, for inclusion in your next post. Do *not* select the thumbnail link, as the picture is too small. Paul I hope this is not considered hijacking this thread. I also have a long list (56 important, 27 optional) of updates that have accumulated ever since I set updates to let me decide if I wanted to download them. I set it this way because I got tired of just saying NO to the Windows 10 update icon that kept popping up. Now that Windows 10 is not free, the pop up no longer appears. Maybe it's time to download and install some of these updates. I used to check out the function of each individual update, just out of curiosity, but it's gotten too time consuming, so I just 'trusted' them, Still, I've always created a restore point before applying a set of updates. A few time in the past, I have had to do a restore after an update caused problems, and then research which update 'broke' things. I don't apply non-manufacturer hardware updates. I used the Snipping Tool to capture the list of 56 important updates sitting in the updates. http://postimg.org/gallery/2gewpyp9a/ The last time I let updates fly automatically was November, 2015. winver.exe yields Windows 7 Home Premium, version 6.1, build 7601: Service Pack 1 (It's 64-bit) If I decided to get back to installing updates, any comments on which to do first, or any other comments? Thanks. |
#5
|
|||
|
|||
Large list, Important Updates??
Boris wrote:
Paul wrote in : Geri wrote: Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Take a picture of the large list, and post it here. Try the "clippingtool" in your OS, to take a screen shot. Save as PNG. On the following web page... Select "Do not resize my image". Select "Family Safe". Then click "Choose Image". https://postimage.org/index.php?um=flash The hardest part, is selecting the correct URL, the middle part of the forum link, for inclusion in your next post. Do *not* select the thumbnail link, as the picture is too small. Paul I hope this is not considered hijacking this thread. I also have a long list (56 important, 27 optional) of updates that have accumulated ever since I set updates to let me decide if I wanted to download them. I set it this way because I got tired of just saying NO to the Windows 10 update icon that kept popping up. Now that Windows 10 is not free, the pop up no longer appears. Maybe it's time to download and install some of these updates. I used to check out the function of each individual update, just out of curiosity, but it's gotten too time consuming, so I just 'trusted' them, Still, I've always created a restore point before applying a set of updates. A few time in the past, I have had to do a restore after an update caused problems, and then research which update 'broke' things. I don't apply non-manufacturer hardware updates. I used the Snipping Tool to capture the list of 56 important updates sitting in the updates. http://postimg.org/gallery/2gewpyp9a/ The last time I let updates fly automatically was November, 2015. winver.exe yields Windows 7 Home Premium, version 6.1, build 7601: Service Pack 1 (It's 64-bit) If I decided to get back to installing updates, any comments on which to do first, or any other comments? Thanks. Your pattern looks relatively normal. A pile of .NET 3.5.1 updates at the top. And if you go lookup the KB3046017, it is dated Aug 2015. And a check on archive.org shows that's probably the original release date. So it's not like that particular one I picked at random, was a reissue or something. You're just a slow updater like me :-) Not wishing to get GWX particularly. I would do the top one and the .NET first. Then, depending on whether it will tolerate it, install the July cumulative. Visit this site with Internet Explorer. The only reason for wanting this one, is for the potential repair to Windows Update and the time it takes for the update screen to appear. Without this, it can take 5-8 hours for the screen to show the update list. Perhaps you've installed this already. http://catalog.update.microsoft.com/...aspx?q=3172605 If when you install that it says the update is "not applicable", install the April 2015 Servicing Stack update first. You may already have this installed in your system. And judging by your list, I'm guessing you've already got this one. http://catalog.update.microsoft.com/...aspx?q=3020369 For the rest of the updates, review them individually. Or, use one of the update tools discussed recently (Blackhawk?). Somebody made a tool for the express purpose of avoiding the telemetry updates and so on. Part of 3172605, is a few files for adding support for Universal Apps to Windows 7. I expect that's why they're making cumulatives like that one, to offload stuff people may have otherwise avoided. I don't think there is a GWX '583 in there. I didn't see it in the file list. But really, the same result can be obtained, by just reading the description individually on each update, and deciding whether it belongs on your system. I've done this a couple of times for newly installed OSes, and it can mean reading 150-200 of the stupid things. It'll take more than one cup of coffee. Paul |
#6
|
|||
|
|||
Large list, Important Updates??
Paul wrote in :
Boris wrote: Paul wrote in : Geri wrote: Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Take a picture of the large list, and post it here. Try the "clippingtool" in your OS, to take a screen shot. Save as PNG. On the following web page... Select "Do not resize my image". Select "Family Safe". Then click "Choose Image". https://postimage.org/index.php?um=flash The hardest part, is selecting the correct URL, the middle part of the forum link, for inclusion in your next post. Do *not* select the thumbnail link, as the picture is too small. Paul I hope this is not considered hijacking this thread. I also have a long list (56 important, 27 optional) of updates that have accumulated ever since I set updates to let me decide if I wanted to download them. I set it this way because I got tired of just saying NO to the Windows 10 update icon that kept popping up. Now that Windows 10 is not free, the pop up no longer appears. Maybe it's time to download and install some of these updates. I used to check out the function of each individual update, just out of curiosity, but it's gotten too time consuming, so I just 'trusted' them, Still, I've always created a restore point before applying a set of updates. A few time in the past, I have had to do a restore after an update caused problems, and then research which update 'broke' things. I don't apply non-manufacturer hardware updates. I used the Snipping Tool to capture the list of 56 important updates sitting in the updates. http://postimg.org/gallery/2gewpyp9a/ The last time I let updates fly automatically was November, 2015. winver.exe yields Windows 7 Home Premium, version 6.1, build 7601: Service Pack 1 (It's 64-bit) If I decided to get back to installing updates, any comments on which to do first, or any other comments? Thanks. Your pattern looks relatively normal. A pile of .NET 3.5.1 updates at the top. And if you go lookup the KB3046017, it is dated Aug 2015. And a check on archive.org shows that's probably the original release date. So it's not like that particular one I picked at random, was a reissue or something. You're just a slow updater like me :-) Not wishing to get GWX particularly. I would do the top one and the .NET first. Then, depending on whether it will tolerate it, install the July cumulative. Visit this site with Internet Explorer. The only reason for wanting this one, is for the potential repair to Windows Update and the time it takes for the update screen to appear. Without this, it can take 5-8 hours for the screen to show the update list. Perhaps you've installed this already. http://catalog.update.microsoft.com/...aspx?q=3172605 If when you install that it says the update is "not applicable", install the April 2015 Servicing Stack update first. You may already have this installed in your system. And judging by your list, I'm guessing you've already got this one. http://catalog.update.microsoft.com/...aspx?q=3020369 For the rest of the updates, review them individually. Or, use one of the update tools discussed recently (Blackhawk?). Somebody made a tool for the express purpose of avoiding the telemetry updates and so on. Part of 3172605, is a few files for adding support for Universal Apps to Windows 7. I expect that's why they're making cumulatives like that one, to offload stuff people may have otherwise avoided. I don't think there is a GWX '583 in there. I didn't see it in the file list. But really, the same result can be obtained, by just reading the description individually on each update, and deciding whether it belongs on your system. I've done this a couple of times for newly installed OSes, and it can mean reading 150-200 of the stupid things. It'll take more than one cup of coffee. Paul Guess I have my Sunday full, Thanks much. |
#7
|
|||
|
|||
Large list, Important Updates??
Paul wrote in :
Boris wrote: Paul wrote in : Geri wrote: Now for several weeks I have a list of over 50 “Important Updates”. In the past I have always kept my Windows 7 PC up to date. Why this list? I tried to download a couple and it takes forever. Granted I don’t have the fasted internet access but this hasn’t caused any problems in the past. Why this large list??? Take a picture of the large list, and post it here. Try the "clippingtool" in your OS, to take a screen shot. Save as PNG. On the following web page... Select "Do not resize my image". Select "Family Safe". Then click "Choose Image". https://postimage.org/index.php?um=flash The hardest part, is selecting the correct URL, the middle part of the forum link, for inclusion in your next post. Do *not* select the thumbnail link, as the picture is too small. Paul I hope this is not considered hijacking this thread. I also have a long list (56 important, 27 optional) of updates that have accumulated ever since I set updates to let me decide if I wanted to download them. I set it this way because I got tired of just saying NO to the Windows 10 update icon that kept popping up. Now that Windows 10 is not free, the pop up no longer appears. Maybe it's time to download and install some of these updates. I used to check out the function of each individual update, just out of curiosity, but it's gotten too time consuming, so I just 'trusted' them, Still, I've always created a restore point before applying a set of updates. A few time in the past, I have had to do a restore after an update caused problems, and then research which update 'broke' things. I don't apply non-manufacturer hardware updates. I used the Snipping Tool to capture the list of 56 important updates sitting in the updates. http://postimg.org/gallery/2gewpyp9a/ The last time I let updates fly automatically was November, 2015. winver.exe yields Windows 7 Home Premium, version 6.1, build 7601: Service Pack 1 (It's 64-bit) If I decided to get back to installing updates, any comments on which to do first, or any other comments? Thanks. Your pattern looks relatively normal. A pile of .NET 3.5.1 updates at the top. And if you go lookup the KB3046017, it is dated Aug 2015. And a check on archive.org shows that's probably the original release date. So it's not like that particular one I picked at random, was a reissue or something. You're just a slow updater like me :-) Not wishing to get GWX particularly. I would do the top one and the .NET first. Then, depending on whether it will tolerate it, install the July cumulative. Visit this site with Internet Explorer. The only reason for wanting this one, is for the potential repair to Windows Update and the time it takes for the update screen to appear. Without this, it can take 5-8 hours for the screen to show the update list. Perhaps you've installed this already. http://catalog.update.microsoft.com/...aspx?q=3172605 If when you install that it says the update is "not applicable", install the April 2015 Servicing Stack update first. You may already have this installed in your system. And judging by your list, I'm guessing you've already got this one. http://catalog.update.microsoft.com/...aspx?q=3020369 For the rest of the updates, review them individually. Or, use one of the update tools discussed recently (Blackhawk?). Somebody made a tool for the express purpose of avoiding the telemetry updates and so on. Part of 3172605, is a few files for adding support for Universal Apps to Windows 7. I expect that's why they're making cumulatives like that one, to offload stuff people may have otherwise avoided. I don't think there is a GWX '583 in there. I didn't see it in the file list. But really, the same result can be obtained, by just reading the description individually on each update, and deciding whether it belongs on your system. I've done this a couple of times for newly installed OSes, and it can mean reading 150-200 of the stupid things. It'll take more than one cup of coffee. Paul Crap. Update 3046017 installed alright. But, when I tried to install all seven of the .NET updates at once, three different times, they failed every time. Here's the error message I got: https://postimg.org/image/tox5g0amr/ I did go to archive.org, next, and downloaded the Windows 7 64 bit 29.2 MB July 2016 update rollup, and tried to install it, but it kept saying searching for updates, and wouldn't install. I've googled to see what to do next, but nothing has helped. |
#8
|
|||
|
|||
Large list, Important Updates??
Boris wrote:
Crap. Update 3046017 installed alright. But, when I tried to install all seven of the .NET updates at once, three different times, they failed every time. Here's the error message I got: https://postimg.org/image/tox5g0amr/ I did go to archive.org, next, and downloaded the Windows 7 64 bit 29.2 MB July 2016 update rollup, and tried to install it, but it kept saying searching for updates, and wouldn't install. I've googled to see what to do next, but nothing has helped. Go back to Windows Update. Check the History item on the left. It should have successes and failures. A failure followed by a success, means that one is finally done properly, for example. What you're looking for, is one that is failed, and is "clogging the pipe". Look in the list. For the one that is failed and hasn't succeeded yet, use Internet Explorer and fetch the update manually. Enter the KB number on the end. Download the update. If the final download is a .msu, then right click and "install" should work. Using your pictures, you could download them all manually. Depending on your tolerance of pain. http://catalog.update.microsoft.com/...aspx?q=3122648 http://catalog.update.microsoft.com/...aspx?q=3127220 http://catalog.update.microsoft.com/...aspx?q=3135983 http://catalog.update.microsoft.com/...aspx?q=3142024 http://catalog.update.microsoft.com/...aspx?q=3142042 http://catalog.update.microsoft.com/...aspx?q=3163245 http://catalog.update.microsoft.com/...aspx?q=3072305 Another way to list updates, is with MBSA 2.3 . Tick just the single item in the interface to scan for updates, and it can get the list in 5-8 minutes. But it's not an install tool. The output of MBSA 2.3 can be combined with the Catalog server method to make a manual Windows Update (just for Important security updates). http://www.microsoft.com/en-us/downl...s.aspx?id=7558 On the first run, it downloads a 100MB manifest file. That takes a bit of time. On subsequent runs on the same day, it reuses the file it already has. So if, say, you didn't like waiting 5-8 hours for the Windows Update list to paint on the screen, you could do the process manually using MBSA 2.3 output. But you should still eventually apply the July 2016 update rollup. As it's supposed to reduce the time for Windows Update screen to work. In my list before, the 3020369 should be the servicing stack one (likely to be already installed). You'll need to unclog the pipe by manually installing the broken .NET, before trying these. http://support.microsoft.com/kb/3172605 http://catalog.update.microsoft.com/...aspx?q=3020369 http://catalog.update.microsoft.com/...aspx?q=3172605 Paul |
#9
|
|||
|
|||
Large list, Important Updates??
En el artculo , Paul
escribi: But really, the same result can be obtained, by just reading the description individually on each update Many of them don't even have a description now, they just take you to a generic landing page. MICROS~1 want us to trust them and "just install". Yeah, right, sure, after the GWX fiasco and the retro-fitting of Win10 "telemetry" (aka spyware) to Win7 and Win8. From another thread: Today, Windows Update offered an "Important" patch. H'm, thinks I. Let's see what it is... A timezone update for Egypt. Yeah, dead important. 337KB - for a timezone update for a single country. What else is lurking in there? -- (\_/) (='.'=) systemd: the Linux version of Windows 10 (")_(") |
#10
|
|||
|
|||
Large list, Important Updates??
Paul wrote in :
Boris wrote: Crap. Update 3046017 installed alright. But, when I tried to install all seven of the .NET updates at once, three different times, they failed every time. Here's the error message I got: https://postimg.org/image/tox5g0amr/ I did go to archive.org, next, and downloaded the Windows 7 64 bit 29.2 MB July 2016 update rollup, and tried to install it, but it kept saying searching for updates, and wouldn't install. I've googled to see what to do next, but nothing has helped. Go back to Windows Update. Check the History item on the left. It should have successes and failures. A failure followed by a success, means that one is finally done properly, for example. What you're looking for, is one that is failed, and is "clogging the pipe". Look in the list. For the one that is failed and hasn't succeeded yet, use Internet Explorer and fetch the update manually. Enter the KB number on the end. Download the update. If the final download is a .msu, then right click and "install" should work. Besides the seven .NET failures, there are 27 other failures from yesterday. I do not know how they got there, but they are there. At any rate, I did fetch KB3122648 (a .NET failure of yesterday) to my desktop, just now. It was a .msu, and when I clicked it off, I saw the old "initializing...installing 1 of 1....done!" that I remember seeing in prior versions of Windows. I then checked the update history, and showed KB3122648 successful. Now for the other 33. Thanks. Using your pictures, you could download them all manually. Depending on your tolerance of pain. http://catalog.update.microsoft.com/...aspx?q=3122648 http://catalog.update.microsoft.com/...aspx?q=3127220 http://catalog.update.microsoft.com/...aspx?q=3135983 http://catalog.update.microsoft.com/...aspx?q=3142024 http://catalog.update.microsoft.com/...aspx?q=3142042 http://catalog.update.microsoft.com/...aspx?q=3163245 http://catalog.update.microsoft.com/...aspx?q=3072305 Another way to list updates, is with MBSA 2.3 . Tick just the single item in the interface to scan for updates, and it can get the list in 5-8 minutes. But it's not an install tool. The output of MBSA 2.3 can be combined with the Catalog server method to make a manual Windows Update (just for Important security updates). http://www.microsoft.com/en-us/downl...s.aspx?id=7558 On the first run, it downloads a 100MB manifest file. That takes a bit of time. On subsequent runs on the same day, it reuses the file it already has. So if, say, you didn't like waiting 5-8 hours for the Windows Update list to paint on the screen, you could do the process manually using MBSA 2.3 output. But you should still eventually apply the July 2016 update rollup. As it's supposed to reduce the time for Windows Update screen to work. In my list before, the 3020369 should be the servicing stack one (likely to be already installed). You'll need to unclog the pipe by manually installing the broken .NET, before trying these. http://support.microsoft.com/kb/3172605 http://catalog.update.microsoft.com/...aspx?q=3020369 http://catalog.update.microsoft.com/...aspx?q=3172605 Paul |
#11
|
|||
|
|||
Large list, Important Updates??
On Mon, 29 Aug 2016 08:09:23 +0100, Mike Tomlinson
wrote: En el artculo , Paul escribi: But really, the same result can be obtained, by just reading the description individually on each update Many of them don't even have a description now, they just take you to a generic landing page. MICROS~1 want us to trust them and "just install". Yeah, right, sure, after the GWX fiasco and the retro-fitting of Win10 "telemetry" (aka spyware) to Win7 and Win8. What, pray tell, are the updates that have the Win10 telemetry" ?? From another thread: Today, Windows Update offered an "Important" patch. H'm, thinks I. Let's see what it is... A timezone update for Egypt. Yeah, dead important. 337KB - for a timezone update for a single country. What else is lurking in there? |
#12
|
|||
|
|||
Large list, Important Updates??
En el artculo , masonc
escribi: What, pray tell, are the updates that have the Win10 telemetry" ?? Here. Cut and paste this into Notepad and save it as whatever.bat. Run whatever.bat from an elevated command prompt. rem Ease upgrade experience to the latest version of Windows. wusa /uninstall /kb:2952664 /norestart rem CEIP diagnostics and telemetry. wusa /uninstall /kb:2976978 /norestart rem CEIP diagnostics and telemetry. wusa /uninstall /kb:2977759 /norestart rem Enables you to upgrade to a later version of Windows. wusa /uninstall /kb:2990214 /norestart rem Enables Win10 universal CRT on earlier versions of windows. wusa /uninstall /kb:2999226 /norestart rem CEIP diagnostics and telemetry. wusa /uninstall /kb:3021917 /norestart rem CEIP diagnostics and telemetry. Replaced by KB3068708. wusa /uninstall /kb:3022345 /norestart rem Installs Get Windows X program. Creates UAC backdoor. wusa /uninstall /kb:3035583 /norestart rem Enables you to upgrade to Win10. wusa /uninstall /kb:3044374 /norestart rem Determines whether to migrate .NET 1.1 with upgrades to a later version of Windows. wusa /uninstall /kb:3046480 /norestart rem Improvements to support upgrades to a later version of Windows. wusa /uninstall /kb:3050265 /norestart rem Improvements to support upgrades to a later version of Windows. wusa /uninstall /kb:3050267 /norestart rem Enables KMS hosts to activate Win10. wusa /uninstall /kb:3058168 /norestart rem Improvements to Win7 Windows Update Client. July 2015. wusa /uninstall /kb:3065987 /norestart rem Improvements to Win8.1 Windows Update Client. July 2015. wusa /uninstall /kb:3065988 /norestart rem CEIP diagnostics and telemetry. Replaced by KB3068708. wusa /uninstall /kb:3068708 /norestart rem Adds telemetry. wusa /uninstall /kb:3075249 /norestart rem Improvements to Win7 Windows Update Client. August 2015. wusa /uninstall /kb:3075851 /norestart rem Improvements to Win8.1 Windows Update Client. August 2015. wusa /uninstall /kb:3075853 /norestart rem Updates CEIP diagnostics and telemetry to match Win10. wusa /uninstall /kb:3080149 /norestart rem Improvements to Win7 Windows Update Client. September 2015. wusa /uninstall /kb:3083324 /norestart rem Improvements to Win8.1 Windows Update Client. September 2015. wusa /uninstall /kb:3083325 /norestart rem Improvements to Win7 Windows Update Client. October 2015. wusa /uninstall /kb:3083710 /norestart rem Improvements to Win8.1 Windows Update Client. October 2015. wusa /uninstall /kb:3083325 /norestart rem Improvements to Win8.1 Windows Update Client. December 2015. wusa /uninstall /kb:3112336 /norestart rem Improvements to Win7 Windows Update Client. December 2015. wusa /uninstall /kb:3112343 /norestart rem Updated capabilities to upgrade Windows 8.1 and Windows 7 wusa /uninstall /kb:3123862 /norestart -- (\_/) (='.'=) systemd: the Linux version of Windows 10 (")_(") |
#13
|
|||
|
|||
Large list, Important Updates??
Boris wrote in
09.88: Paul wrote in : Boris wrote: Crap. Update 3046017 installed alright. But, when I tried to install all seven of the .NET updates at once, three different times, they failed every time. Here's the error message I got: https://postimg.org/image/tox5g0amr/ I did go to archive.org, next, and downloaded the Windows 7 64 bit 29.2 MB July 2016 update rollup, and tried to install it, but it kept saying searching for updates, and wouldn't install. I've googled to see what to do next, but nothing has helped. Go back to Windows Update. Check the History item on the left. It should have successes and failures. A failure followed by a success, means that one is finally done properly, for example. What you're looking for, is one that is failed, and is "clogging the pipe". Look in the list. For the one that is failed and hasn't succeeded yet, use Internet Explorer and fetch the update manually. Enter the KB number on the end. Download the update. If the final download is a .msu, then right click and "install" should work. Besides the seven .NET failures, there are 27 other failures from yesterday. I do not know how they got there, but they are there. At any rate, I did fetch KB3122648 (a .NET failure of yesterday) to my desktop, just now. It was a .msu, and when I clicked it off, I saw the old "initializing...installing 1 of 1....done!" that I remember seeing in prior versions of Windows. I then checked the update history, and showed KB3122648 successful. Now for the other 33. Thanks. Using your pictures, you could download them all manually. Depending on your tolerance of pain. http://catalog.update.microsoft.com/...aspx?q=3122648 http://catalog.update.microsoft.com/...aspx?q=3127220 http://catalog.update.microsoft.com/...aspx?q=3135983 http://catalog.update.microsoft.com/...aspx?q=3142024 http://catalog.update.microsoft.com/...aspx?q=3142042 http://catalog.update.microsoft.com/...aspx?q=3163245 http://catalog.update.microsoft.com/...aspx?q=3072305 Another way to list updates, is with MBSA 2.3 . Tick just the single item in the interface to scan for updates, and it can get the list in 5-8 minutes. But it's not an install tool. The output of MBSA 2.3 can be combined with the Catalog server method to make a manual Windows Update (just for Important security updates). http://www.microsoft.com/en-us/downl...s.aspx?id=7558 On the first run, it downloads a 100MB manifest file. That takes a bit of time. On subsequent runs on the same day, it reuses the file it already has. So if, say, you didn't like waiting 5-8 hours for the Windows Update list to paint on the screen, you could do the process manually using MBSA 2.3 output. But you should still eventually apply the July 2016 update rollup. As it's supposed to reduce the time for Windows Update screen to work. In my list before, the 3020369 should be the servicing stack one (likely to be already installed). You'll need to unclog the pipe by manually installing the broken .NET, before trying these. http://support.microsoft.com/kb/3172605 http://catalog.update.microsoft.com/...aspx?q=3020369 http://catalog.update.microsoft.com/...aspx?q=3172605 Paul Well, I spoke too soon, but all 56 updates are finally installed. It seems all it took was patience, I do have a question at the end. Although KB3122648 went quickly (a few minutes) none of the other .msu files I downloaded would install in a reasonable time. I lost patience and could see that if it took hours or more for each manually downloaded update, which could either install or fail, I wouildn't have use of this pc for days. I did a lot more googling, and found lots and lots of alternative fixes, which worked for some, but not for others. Things like the FixIt Tool, registry hacks, Windows Update Agent updates, etc. I didn't want to try any, for fear of breaking things even more. I did do a scannow, though, and all was well. I then tried the "Fix problems with Windows Update" in the Control Panel's System and Security group. I clicked it off, "Troubleshoot and help prevent computer problems-Windows Update". It ran for a minute of so, saying "Detecting problems-Checking for updates online". The results were, "Try Windows Update again-Online search for updates ran successfully. Restart Update and click 'Check for updates' ". OK, I did, and it did the usual 'searching for updates'. Hours went by, and I went to bed. In the morning, it said, "Downloading Updates, 0% done", but within minutes, it reported 97, 98, 99, 100% done, with all 56 updates, and I clicked off install. Odd, though, since I never asked to download updates, and I'm set to 'let me choose to download'. This install didn't take long at all, Finally, I got, "The updates were successfully installed", "Restart now". I did, and this only took a few minutes. I went to "View update history", and all showed Successful. I did a "Check for updates", and got, "No important updates available". http://postimg.org/gallery/32r6i6s3y/ I guess patience really is a virtue. Since an update check shows, "No important updates available", do I still apply KB3172605, the July rollup? |
#14
|
|||
|
|||
Large list, Important Updates??
Boris wrote in
09.88: Boris wrote in 09.88: Really Big Snip Since an update check shows, "No important updates available", do I still apply KB3172605, the July rollup? I now see that KB3172605 is listed in Optional Updates. https://postimg.org/image/qxqtrbea5/ This optional update may repair the long wait times experienced with Windows Update to show the update screen. |
#15
|
|||
|
|||
Large list, Important Updates??
Boris wrote:
Boris wrote in 09.88: Boris wrote in 09.88: Really Big Snip Since an update check shows, "No important updates available", do I still apply KB3172605, the July rollup? I now see that KB3172605 is listed in Optional Updates. https://postimg.org/image/qxqtrbea5/ This optional update may repair the long wait times experienced with Windows Update to show the update screen. I would give it a try. Your wait time might drop to 4 to 8 minutes. Paul |
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|