If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Network all screwed up!
Well, since you can access the Internet from both
machines, you know the network is working--and this probably also confirms that TCP/IP is installed on each machine, IP is working, and that the machines are on the same sub-net. You need to bear in mind that Microsoft networking requires some form of name resolution to be able to show computers in My Network Places. Does your router support DHCP, and is this how you are configuring the local computers, or are you manually assigning IP addresses? If manual, make sure you have both computers on the same sub-net (if you don't understand that, do "ipcofing /all c:\ipconfig.txt" on the XP machine, and winipcfg on the 98 machine, and send us the IP info for both machines). You can also add the system names and IP addresses in the "\windows\system32\drivers\etc\hosts" file (on the XP side anyway) to assist with name resolution. I don't remember, off-hand, where this file is on 98--search for hosts.sam, and save the file as hosts. And don't rely on My Network Places to gauge whether the network is working or not. Do you have file and print services installed and enabled? Are you actually sharing folders or printers? If so, on one computer go to Start | Run, and enter (in a UNC format) \\xxx.xxx.xxx.xxx, where the 'xxx's are the IP address of the other computer. You should get a window that pops up showing all the shared resources on the other computer. My experience is that you'll have a lot more luck connecting from the XP side to the 98 side, rather than the other way around. Let us know how it works out. Thanks, Jack -----Original Message----- Our new TV has a connection for use as a computer monitor so I bought a new computer. I moved the old Gateway computer with Windows 98 to the living room and the new Gateway computer with Windows XP Home in the our home office where the old computer used to reside. I had to buy and install a wired fast ethernet 10/100 network card in the old computer. The new computer aleady has a network card. I also bought a 4-port router to hook it all up. All the connections on the router are ethernet. I connected my cable modem into the router at the internet port and each computer to the router's LAN ports using ethernet cables. I used port 1 for the Windows 98 living room computer and port 3 for the Windows XP office computer. At first, I couldn't get anything to work. I could not even connect to the internet. I called my internet provider and straightened out my internet connection but I still have no network. I can connect to the internet on both computers now but neither computer shows the other computer on the network. I've tried almost everything for a couple of weeks and I still have no network. Is this an impossible task? I'm turning blue in the face! . |
Ads |
Thread Tools | |
Display Modes | |
|
|