A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Printing and Faxing with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Faxes and dial up connection



 
 
Thread Tools Display Modes
  #46  
Old April 28th 04, 05:37 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
Clarify your setup. Fax is on what computer?
What type of dial up access are you using?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:538401c42cc3$22a1f220

...

-----Original Message-----
Can you dial up when you set the Fax to manual answer?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information

about
your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use

the
same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"

wrote in message news:3ec101c42b02$debd1880
...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used

the
wizard from windows xp professional--Went to

add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a

direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't

let
me answer that way.
If I disable fax, the dial up works fine. There is

some
type conflict in the actual answering.



.

Just read your answer again and realized I may have read
it wrong the first time. If the work computer is set to
manuel and I try to dial into it from home, I get a
message that the work computer did not answer...it's
still like it is a fax and did not get manually
answered. Thanks.



.

All of the set ups are explained in a previous post. The
fax is microsofts xp on the work computer and the dial up
is a dial up connection from home to work to use the work
computer with remote desktop.

Ads
  #47  
Old April 28th 04, 05:37 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
You cannot use XP fax program through another computer.

It has to use a
anolog modem with an anolog phone line going to the

computer the XP fax
program is on..


"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information about

your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use the

same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:3ec101c42b02$debd1880

...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used the

wizard from windows xp professional--Went to add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't let
me answer that way.
If I disable fax, the dial up works fine. There is some
type conflict in the actual answering.



.

To Clarify--not trying to send a fax through the dial up.
When I am back at work on the computer that was being
dialed into from home...the fax will not answer if it is
set to manuel answer. If the computer at work is set to
auto answer and I am at home trying to dial into the work
computer it tries to answer like it is a fax. I get a
failed fax message at the work computer and the home
computer says it could not connect.

  #48  
Old April 28th 04, 05:37 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
Can you dial up when you set the Fax to manual answer?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information

about
your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use the

same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:3ec101c42b02$debd1880

...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used the

wizard from windows xp professional--Went to add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't

let
me answer that way.
If I disable fax, the dial up works fine. There is

some
type conflict in the actual answering.



.

Just read your answer again and realized I may have read
it wrong the first time. If the work computer is set to
manuel and I try to dial into it from home, I get a
message that the work computer did not answer...it's
still like it is a fax and did not get manually
answered. Thanks.

  #49  
Old April 28th 04, 05:46 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
Clarify your setup. Fax is on what computer?
What type of dial up access are you using?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:538401c42cc3$22a1f220

...

-----Original Message-----
Can you dial up when you set the Fax to manual answer?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information

about
your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use

the
same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"

wrote in message news:3ec101c42b02$debd1880
...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used

the
wizard from windows xp professional--Went to

add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a

direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't

let
me answer that way.
If I disable fax, the dial up works fine. There is

some
type conflict in the actual answering.



.

Just read your answer again and realized I may have read
it wrong the first time. If the work computer is set to
manuel and I try to dial into it from home, I get a
message that the work computer did not answer...it's
still like it is a fax and did not get manually
answered. Thanks.



.

All of the set ups are explained in a previous post. The
fax is microsofts xp on the work computer and the dial up
is a dial up connection from home to work to use the work
computer with remote desktop.

  #50  
Old April 28th 04, 05:47 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
You cannot use XP fax program through another computer.

It has to use a
anolog modem with an anolog phone line going to the

computer the XP fax
program is on..


"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information about

your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use the

same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:3ec101c42b02$debd1880

...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used the

wizard from windows xp professional--Went to add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't let
me answer that way.
If I disable fax, the dial up works fine. There is some
type conflict in the actual answering.



.

To Clarify--not trying to send a fax through the dial up.
When I am back at work on the computer that was being
dialed into from home...the fax will not answer if it is
set to manuel answer. If the computer at work is set to
auto answer and I am at home trying to dial into the work
computer it tries to answer like it is a fax. I get a
failed fax message at the work computer and the home
computer says it could not connect.

  #51  
Old April 28th 04, 06:14 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
Clarify your setup. Fax is on what computer?
What type of dial up access are you using?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:538401c42cc3$22a1f220

...

-----Original Message-----
Can you dial up when you set the Fax to manual answer?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information

about
your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use

the
same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"

wrote in message news:3ec101c42b02$debd1880
...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used

the
wizard from windows xp professional--Went to

add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a

direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't

let
me answer that way.
If I disable fax, the dial up works fine. There is

some
type conflict in the actual answering.



.

Just read your answer again and realized I may have read
it wrong the first time. If the work computer is set to
manuel and I try to dial into it from home, I get a
message that the work computer did not answer...it's
still like it is a fax and did not get manually
answered. Thanks.



.

All of the set ups are explained in a previous post. The
fax is microsofts xp on the work computer and the dial up
is a dial up connection from home to work to use the work
computer with remote desktop.

  #52  
Old April 28th 04, 06:14 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
You cannot use XP fax program through another computer.

It has to use a
anolog modem with an anolog phone line going to the

computer the XP fax
program is on..


"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information about

your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use the

same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:3ec101c42b02$debd1880

...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used the

wizard from windows xp professional--Went to add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't let
me answer that way.
If I disable fax, the dial up works fine. There is some
type conflict in the actual answering.



.

To Clarify--not trying to send a fax through the dial up.
When I am back at work on the computer that was being
dialed into from home...the fax will not answer if it is
set to manuel answer. If the computer at work is set to
auto answer and I am at home trying to dial into the work
computer it tries to answer like it is a fax. I get a
failed fax message at the work computer and the home
computer says it could not connect.

  #53  
Old April 28th 04, 06:15 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
Clarify your setup. Fax is on what computer?
What type of dial up access are you using?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:538401c42cc3$22a1f220

...

-----Original Message-----
Can you dial up when you set the Fax to manual answer?
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information

about
your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use

the
same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"

wrote in message news:3ec101c42b02$debd1880
...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used

the
wizard from windows xp professional--Went to

add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a

direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't

let
me answer that way.
If I disable fax, the dial up works fine. There is

some
type conflict in the actual answering.



.

Just read your answer again and realized I may have read
it wrong the first time. If the work computer is set to
manuel and I try to dial into it from home, I get a
message that the work computer did not answer...it's
still like it is a fax and did not get manually
answered. Thanks.



.

All of the set ups are explained in a previous post. The
fax is microsofts xp on the work computer and the dial up
is a dial up connection from home to work to use the work
computer with remote desktop.

  #54  
Old April 28th 04, 06:16 PM
wallydog57 \(removethis\) @aol.com
external usenet poster
 
Posts: n/a
Default Faxes and dial up connection


-----Original Message-----
You cannot use XP fax program through another computer.

It has to use a
anolog modem with an anolog phone line going to the

computer the XP fax
program is on..


"wallydog57 (removethis) @aol.com"


wrote in message news:463701c42bc2$d75cf5e0

...

-----Original Message-----
You need to provide far more detailed information about

your fax software
and how it is configured and your dial up ISP

connection
and how it is
configured.
Fax and dial up internet connections can both use the

same analog phone
line, but obviously not at the same time.
--
Russ Valentine
[MVP-Outlook]
"wallydog57 (removethis) @aol.com"


wrote in message news:3ec101c42b02$debd1880

...
On a dedicated phone line--Dial up connection and

remote
connection work if Fax isn't installed. But when I

set
up
fax and try a dial up connection, it will not

connect.
Can they exist on the same phone line? Help.


.Thanks for trying to help. On the Faxes--I used the

wizard from windows xp professional--Went to add/remove
windows components and followed the directions. Fax
worked fine.
The dial up is not through an ISP--it is just a direct
dial up from home to my office computer over phone

lines,
then using remote desktop. The office computer acts

like
it is trying to answer a fax rather than my home

computer.
Also, I tried setting the fax to manuel and it won't let
me answer that way.
If I disable fax, the dial up works fine. There is some
type conflict in the actual answering.



.

To Clarify--not trying to send a fax through the dial up.
When I am back at work on the computer that was being
dialed into from home...the fax will not answer if it is
set to manuel answer. If the computer at work is set to
auto answer and I am at home trying to dial into the work
computer it tries to answer like it is a fax. I get a
failed fax message at the work computer and the home
computer says it could not connect.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 10:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.