If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Adding a 2nd. HDD as slave
Providing that the physical IDE connections and slave
jumpers are right, and when booting the pc, accesing the BIOS process and formatting the new drive goes well. Do I have to implement the OS, in this case XP Professional into the new drive? If so, please let me know how. If not, again help me proceed the right direction. Thank you. Jaipor |
Ads |
#2
|
|||
|
|||
Adding a 2nd. HDD as slave
right click on my computer
click manage under storage, select Disk Management. your new drive should be listed here. normally a drive utility appears and assists you in adding the drive... you can also format it or change drive letter here as well. hope this helps. kirk "Jaime" wrote in message ... Providing that the physical IDE connections and slave jumpers are right, and when booting the pc, accesing the BIOS process and formatting the new drive goes well. Do I have to implement the OS, in this case XP Professional into the new drive? If so, please let me know how. If not, again help me proceed the right direction. Thank you. Jaipor |
Thread Tools | |
Display Modes | |
|
|