If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
What does my wi-fi log mean.
As I posted, I got a wifi receiver for my desktop PC, do I could use the
cell phone as a hotspot/internet source, and you folks helped me with the software, and it seemed to work, but the DSL was also working so it wasn't a very good test. This morning the DSL wasn't working, so I tested again, didn't try to do too much, and it seemed to be working but maybe that was the DSL so I turned off the DSL modem, and nothing was working after all. This is the log of the wifi-receiver. It looks pretty good to me. I thought what I had done was get a couple webpages, check my email once and dl 2 of them, check 3 newsgroups and dl 2 headers. Are the numbers below too low for that. Maybe it was working and it stopped. BTW, which is transmitting - uploading from the PC to the phone to then Net? Transmit Transmitted succesfully 8515 Retransmitted successfully 46 Fail to receive ACK after all replies 0 Receive Received Successfully 4654 Received with CRC Error 9031 ** Dropped due to out of resource 0 Duplicate frames received 0 The icon in the sstray gives 3 choices Launch config utility -- This is what I use. Switch to AP mode Swtich to Client - AP mode. Which one of the second two do i want? **So what does it mean when the CRC errors outnumber the successful packets? In this case that many packets had errors more than once?? But all total, I got 4654 packets. Why are theere so many errors? The phone was only 8 inches from the PC and its receiver. TIA |
Ads |
#2
|
|||
|
|||
What does my wi-fi log mean.
micky wrote:
As I posted, I got a wifi receiver for my desktop PC, do I could use the cell phone as a hotspot/internet source, and you folks helped me with the software, and it seemed to work, but the DSL was also working so it wasn't a very good test. This morning the DSL wasn't working, so I tested again, didn't try to do too much, and it seemed to be working but maybe that was the DSL so I turned off the DSL modem, and nothing was working after all. This is the log of the wifi-receiver. It looks pretty good to me. I thought what I had done was get a couple webpages, check my email once and dl 2 of them, check 3 newsgroups and dl 2 headers. Are the numbers below too low for that. Maybe it was working and it stopped. BTW, which is transmitting - uploading from the PC to the phone to then Net? Transmit Transmitted succesfully 8515 Retransmitted successfully 46 Fail to receive ACK after all replies 0 Receive Received Successfully 4654 Received with CRC Error 9031 ** Dropped due to out of resource 0 Duplicate frames received 0 The icon in the sstray gives 3 choices Launch config utility -- This is what I use. Switch to AP mode Swtich to Client - AP mode. Which one of the second two do i want? **So what does it mean when the CRC errors outnumber the successful packets? In this case that many packets had errors more than once?? But all total, I got 4654 packets. Why are theere so many errors? The phone was only 8 inches from the PC and its receiver. TIA I don't know if this thread is measuring the same thing, but it does seem to have a lot of CRC errors too. https://forums.whirlpool.net.au/archive/583144 Paul |
Thread Tools | |
Display Modes | Rate This Thread |
|
|