HP printer problem after windows upgrade

Hang on guys, there might be a different issue here. I have just
upgraded from XP Home to XP Pro and this has caused my WinTV USB
device to be recognised as new hardware. When I try to install the
lastest driver for Windows XP, I get the message telling me that
Access is Denied and that I need to log in as Administrator or use an
account with Admin rights. My user does have Admin rights and I have
tried logging in as Admin. No change. Anybody got any ideas? I've
played around with all the obvious things already. If it's something
silly, that I've missed, I apologise!!

Regards

Mark.
=====

"FredP" wrote in message news:SGOia.311055$3D1.171800@sccrnsc01...
Steve ... Amethyst is right, it won't work with what you have. Here's the HP site for the WinXP
drivers/software along with full instructions.
http://tinyurl.com/8pv2

Good luck ... Fred

Amethyst wrote:
Steve Helvey wrote:
I just recently did a full windows home edition XP
upgrade including the new service pack. I have HP 1215
photosmart Printer. after the upgrade down load,the PC
refuses to recognize my printer.It also will not accept
my CD that came with my printer to reload the drivers. It
keeps saying "access denied" when I try to reload the
driver disc. The instl wizard always "finds" the new hard
ware when i start the PC up but will not let me follow
thru and install the printer. It seems now like evey
thime the PC is restarted it loses the printer info and
refuses to maintain it. I thought this was an upgrade!!!
Now I can't get my computer to reconnect with the printer
and then permanenetly retain the setting. Any possible
solutions???? I am using a USB connection to the printer.
Would connecting the printer to a regular printer port
help? Thank you,Steve

And have we visited HP's site and downloaded an XP-compatible driver
- if one exists? No we have not. Of course it won't recognise the
disc - the printer was manufactured before XP was heard of - it
probably only contains 9x/NT drivers.

Start with this.

Go into the Control Panel and uninstall any references to both the Printer
and the WinTV software. Turn off PC and disconnect printer and remove WinTV
USB unit. Reboot PC and go into the Device Manager (right click on My
Computer, select Properties, look in the Hardware tab and you'll find Device
Manager).

Find the Universal Serial Bus Controllers entry, click on the + sign to
expand the tree and right click and select Uninstall for ALL the USB
Controllers (right click and you'll find uninstall).

Reboot the PC. XP should now find and reinstall the USB Controllers
software.

Now add the printer (software first then connect it when it tells you to do
so).... now turn off the PC again and reinstall the WinTV USB unit.

Any joy?

Cari
www.coribright.com

"MarkS" wrote in message
...
Hang on guys, there might be a different issue here. I have just
upgraded from XP Home to XP Pro and this has caused my WinTV USB
device to be recognised as new hardware. When I try to install the
lastest driver for Windows XP, I get the message telling me that
Access is Denied and that I need to log in as Administrator or use an
account with Admin rights. My user does have Admin rights and I have
tried logging in as Admin. No change. Anybody got any ideas? I've
played around with all the obvious things already. If it's something
silly, that I've missed, I apologise!!

Regards

Mark.
=====

"FredP" wrote in message
news:SGOia.311055$3D1.171800@sccrnsc01...
Steve ... Amethyst is right, it won't work with what you have. Here's
the HP site for the WinXP
drivers/software along with full instructions.
http://tinyurl.com/8pv2

Good luck ... Fred

Amethyst wrote:
Steve Helvey wrote:
I just recently did a full windows home edition XP
upgrade including the new service pack. I have HP 1215
photosmart Printer. after the upgrade down load,the PC
refuses to recognize my printer.It also will not accept
my CD that came with my printer to reload the drivers. It
keeps saying "access denied" when I try to reload the
driver disc. The instl wizard always "finds" the new hard
ware when i start the PC up but will not let me follow
thru and install the printer. It seems now like evey
thime the PC is restarted it loses the printer info and
refuses to maintain it. I thought this was an upgrade!!!
Now I can't get my computer to reconnect with the printer
and then permanenetly retain the setting. Any possible
solutions???? I am using a USB connection to the printer.
Would connecting the printer to a regular printer port
help? Thank you,Steve

And have we visited HP's site and downloaded an XP-compatible driver
- if one exists? No we have not. Of course it won't recognise the
disc - the printer was manufactured before XP was heard of - it
probably only contains 9x/NT drivers.