If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#16
|
|||
|
|||
Shortcut keys cannot be re-used
PS=20
=E2=82=AC1=3D A$1.6657 --=20 ---------------------------------------------------------- http://www.uscricket.com "David Candy" . wrote in message = ... http://www.microsoft.com/globaldev/o...downloads.mspx is a upgraded calculator with lots of conversions, incl to units I've = not heard off. It has three modes - normal, scientific (both look same = as old one), and conversions. (I metre =3D 4 keub or 1 metre =3D 0.333 = shaku). Cask wine is big in Australia. It's normally sold in 0.002 kwian = containers. It also does currency conversions. But only supports auto updating of = rates for the Euro. --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Wes, Hi again, =20 Yes, David's post does take a bit of deciphering ! =20 As for reading hex, the Standard Calculator will allow you to convert. = For=20 Hex to Dec, change to Scientific view (from the View menu entry), = click on=20 Hex, enter a number in Hex, then click on Dec to convert (and vice = versa for=20 Dec to Hex). =20 Good luck with the 49 other things. It is great to have people such as = you.=20 Sometimes I can actually contribute myself as I learn a bit more !! =20 "Wesley Vogel" wrote: =20 Trevor, =20 See David Candy's post. I mentioned that I couldn't read hex, he = can. =20 Glad to hear that you got it sorted out. =20 BTW, I'm still deciphering David's post. :-) And working on 49 = other things. =20 --=20 Hope this helps. Let us know. Wes =20 In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered = the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and = tried the shortcut key again - it did nothing (as one would hope). I = then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK = - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't = know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to = "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and = deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key = opens what program? Because the info. is retained after the shortcut itself is = deleted, I would assume that the info. must be stored in the Registry. But = I searched the registry for the value "BurningRom" (as the name of = the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I = found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific = program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can = follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click = Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut = tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which = will restart the PC. (I changed the setting in this program to use = this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut = had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. =20 |
Ads |
#17
|
|||
|
|||
Shortcut keys cannot be re-used
Hi David,
I have downloaded Calculator Plus. Yes, I checked out the conversion from litres (or liters as it is spelt - U.S. spelling, no doubt) to kwian. 4 litres certainly is 0.002 kwian, which means a kwian is 2000 litres. I wonder who uses it ?! Of couse, some winemakers sell 5 litre wine casks in Australia, so that would be 0.0025 kwian - I must try asking for a 0.0025 kwian wine cask at my local LiquorLand :-) You're right, it doesn't support conversion from $AUS to Euro, or for that matter, to any other currency except those which have now converted to the Euro. The currency conversion seems to be there just for historic purposes, as the rates are locked in as at 1 January 1999 (even after I did an update of the rates)!! There are other websites which will convert currency. I presume that is where you got the $AUS conversion from. Cheers "David Candy" wrote: PS €1= A$1.6657 -- ---------------------------------------------------------- http://www.uscricket.com "David Candy" . wrote in message ... http://www.microsoft.com/globaldev/o...downloads.mspx is a upgraded calculator with lots of conversions, incl to units I've not heard off. It has three modes - normal, scientific (both look same as old one), and conversions. (I metre = 4 keub or 1 metre = 0.333 shaku). Cask wine is big in Australia. It's normally sold in 0.002 kwian containers. It also does currency conversions. But only supports auto updating of rates for the Euro. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes, Hi again, Yes, David's post does take a bit of deciphering ! As for reading hex, the Standard Calculator will allow you to convert. For Hex to Dec, change to Scientific view (from the View menu entry), click on Hex, enter a number in Hex, then click on Dec to convert (and vice versa for Dec to Hex). Good luck with the 49 other things. It is great to have people such as you. Sometimes I can actually contribute myself as I learn a bit more !! "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#18
|
|||
|
|||
Shortcut keys cannot be re-used
Hi David,
I have downloaded Calculator Plus. Yes, I checked out the conversion from litres (or liters as it is spelt - U.S. spelling, no doubt) to kwian. 4 litres certainly is 0.002 kwian, which means a kwian is 2000 litres. I wonder who uses it ?! Of couse, some winemakers sell 5 litre wine casks in Australia, so that would be 0.0025 kwian - I must try asking for a 0.0025 kwian wine cask at my local LiquorLand :-) You're right, it doesn't support conversion from $AUS to Euro, or for that matter, to any other currency except those which have now converted to the Euro. The currency conversion seems to be there just for historic purposes, as the rates are locked in as at 1 January 1999 (even after I did an update of the rates)!! There are other websites which will convert currency. I presume that is where you got the $AUS conversion from. Cheers "David Candy" wrote: PS €1= A$1.6657 -- ---------------------------------------------------------- http://www.uscricket.com "David Candy" . wrote in message ... http://www.microsoft.com/globaldev/o...downloads.mspx is a upgraded calculator with lots of conversions, incl to units I've not heard off. It has three modes - normal, scientific (both look same as old one), and conversions. (I metre = 4 keub or 1 metre = 0.333 shaku). Cask wine is big in Australia. It's normally sold in 0.002 kwian containers. It also does currency conversions. But only supports auto updating of rates for the Euro. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes, Hi again, Yes, David's post does take a bit of deciphering ! As for reading hex, the Standard Calculator will allow you to convert. For Hex to Dec, change to Scientific view (from the View menu entry), click on Hex, enter a number in Hex, then click on Dec to convert (and vice versa for Dec to Hex). Good luck with the 49 other things. It is great to have people such as you. Sometimes I can actually contribute myself as I learn a bit more !! "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#19
|
|||
|
|||
Shortcut keys cannot be re-used
I read the help file today because I remembered it didn't seem to work. =
But you can convert from euro to any other currency but you have to = choose Import from the Edit menu first (to get current rates).=20 --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Hi David, I have downloaded Calculator Plus. =20 Yes, I checked out the conversion from litres (or liters as it is = spelt -=20 U.S. spelling, no doubt) to kwian. 4 litres certainly is 0.002 kwian, = which=20 means a kwian is 2000 litres. I wonder who uses it ?!=20 =20 Of couse, some winemakers sell 5 litre wine casks in Australia, so = that=20 would be 0.0025 kwian - I must try asking for a 0.0025 kwian wine cask = at my=20 local LiquorLand :-) =20 You're right, it doesn't support conversion from $AUS to Euro, or for = that=20 matter, to any other currency except those which have now converted to = the=20 Euro. The currency conversion seems to be there just for historic = purposes,=20 as the rates are locked in as at 1 January 1999 (even after I did an = update=20 of the rates)!! =20 There are other websites which will convert currency. I presume that = is=20 where you got the $AUS conversion from. =20 Cheers =20 "David Candy" wrote: =20 PS=20 =E2=82=AC1=3D A$1.6657 =20 =20 --=20 ---------------------------------------------------------- http://www.uscricket.com "David Candy" . wrote in message = ... http://www.microsoft.com/globaldev/o...downloads.mspx =20 is a upgraded calculator with lots of conversions, incl to units I've = not heard off. It has three modes - normal, scientific (both look same = as old one), and conversions. (I metre =3D 4 keub or 1 metre =3D 0.333 = shaku). Cask wine is big in Australia. It's normally sold in 0.002 kwian = containers. =20 It also does currency conversions. But only supports auto updating of = rates for the Euro. --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Wes, Hi again, =20 Yes, David's post does take a bit of deciphering ! =20 As for reading hex, the Standard Calculator will allow you to = convert. For=20 Hex to Dec, change to Scientific view (from the View menu entry), = click on=20 Hex, enter a number in Hex, then click on Dec to convert (and vice = versa for=20 Dec to Hex). =20 Good luck with the 49 other things. It is great to have people such = as you.=20 Sometimes I can actually contribute myself as I learn a bit more !! =20 "Wesley Vogel" wrote: =20 Trevor, =20 See David Candy's post. I mentioned that I couldn't read hex, he = can. =20 Glad to hear that you got it sorted out. =20 BTW, I'm still deciphering David's post. :-) And working on 49 = other things. =20 --=20 Hope this helps. Let us know. Wes =20 In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds = good. Wes, I have yet to try your suggestions for the Registry, but am = looking forward to it. BTW, I have managed to assign the key I used before to the new = program. Whether this is the only way or not or whetehr it will continue = to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered = the old shortcut key. I tested it and it worked (referring to the = old program). I then changed the key in that shortcut to "none" and = tried the shortcut key again - it did nothing (as one would hope). I = then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's = OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to = another program. As I say, there are only so many combinations one can = use before you run out of keys - 26 alpha, 10 numeric (and perhaps = the 12 Function keys although I have ever tried these, so I don't = know). I have already deleted the shortcut to the Nero Help Manual, = but before I did, I made sure that the shortcut key was set to = "(none)". Thanks for the info. as to how to find what key is assigned to = a particular shortcut, but since changing it to "(none)" and = deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key = opens what program? Because the info. is retained after the shortcut itself is = deleted, I would assume that the info. must be stored in the Registry. = But I searched the registry for the value "BurningRom" (as the name = of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I = found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific = program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can = follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut = icon. Right-click the program file or shortcut, and then click = Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut = tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and = pecked: I used to have a Shortcut Ctl-Alt-R which opened a User = manual (actually for Nero). I no longer want to do this as I am = fairly used to Nero now and can open it directly when I want to, so = I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which = will restart the PC. (I changed the setting in this program to use = this sequence.) But I find that using Ctl-Alt-R still invokes the User = manual. There was some info. on a Microsoft KB document re this = problem, but I can't get it to work. I made sure that the old Shortcut = had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability = to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. =20 |
#20
|
|||
|
|||
Shortcut keys cannot be re-used
Wes and David,
All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#21
|
|||
|
|||
Shortcut keys cannot be re-used
The point is they are ONLY multi language hotkeys for use only with =
multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of = setting a hotkey. In shortcuts on Start Menu or Desktop items. By a = program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to = an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature.=20 http://www.microsoft.com/NTWorkstati...etworking/NTT= weakUI.asp --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Wes and David, =20 All good things come to an end. =20 I now find that Ctl-Alt-R invokes the old program again - Nero = BurningRom=20 Help Manual. (I have restarted the computer since it last worked as I = wanted.) =20 The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys = follows =20 START Windows Registry Editor Version 5.00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:be,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:bc,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:47,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4b,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4c,00,00,00 END =20 It is difficult to understand what these mean, but I certainly cannot = find=20 any reference to Ctl-Alt-R =20 From what you (David) said,=20 Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! =20 So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys =20 Any ideas? =20 It doesn't have to involve Registry tweaking so long as I can reuse = the Key=20 (or any other key, for that matter) . =20 Cheers =20 "Wesley Vogel" wrote: =20 Trevor, =20 See David Candy's post. I mentioned that I couldn't read hex, he = can. =20 Glad to hear that you got it sorted out. =20 BTW, I'm still deciphering David's post. :-) And working on 49 = other things. =20 --=20 Hope this helps. Let us know. Wes =20 In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered = the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and = tried the shortcut key again - it did nothing (as one would hope). I = then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK = - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't = know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to = "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and = deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key = opens what program? Because the info. is retained after the shortcut itself is = deleted, I would assume that the info. must be stored in the Registry. But = I searched the registry for the value "BurningRom" (as the name of = the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I = found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific = program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can = follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click = Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut = tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which = will restart the PC. (I changed the setting in this program to use = this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut = had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. =20 |
#22
|
|||
|
|||
Shortcut keys cannot be re-used
David,
Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#23
|
|||
|
|||
Shortcut keys cannot be re-used
All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys.
If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If |
#24
|
|||
|
|||
Shortcut keys cannot be re-used
Hi David,
Well, I managed to install TweakUI 1.33. It installs as a Control Panel icon, which I didn't expect. The Repair Hotkeys item was present, but using it made no difference, even after restarting. The Ctl-Alt-R combination still opens the Nero BurningRom Manual even there is no shortcut present with this set. I can't get your scripts to run - clearly there is something I am doing wrong. However, if they are intended to return the hotkeys for all shortcuts on the desktop and Start Menu, I can actually look at what is set one by one, although the fact that a key is retained after the shortcut is deleted means this may not give all the info. needed. At stage, solving this looks like being in the "too hard" basket Ah well, these are the mysteries of XP :-) Cheers "David Candy" wrote: All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys. If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#25
|
|||
|
|||
Shortcut keys cannot be re-used
It's worked out at boot time. Put that script into c:\ and the bat file then type
c:\findhotkey.bat I had %1 instead of %A at the end of the line. Attached it as a bat file. Then you need to do clean boot troubleshooting http://support.microsoft.com/default...1&PA=1&SD=HSCH -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Hi David, Well, I managed to install TweakUI 1.33. It installs as a Control Panel icon, which I didn't expect. The Repair Hotkeys item was present, but using it made no difference, even after restarting. The Ctl-Alt-R combination still opens the Nero BurningRom Manual even there is no shortcut present with this set. I can't get your scripts to run - clearly there is something I am doing wrong. However, if they are intended to return the hotkeys for all shortcuts on the desktop and Start Menu, I can actually look at what is set one by one, although the fact that a key is retained after the shortcut is deleted means this may not give all the info. needed. At stage, solving this looks like being in the "too hard" basket Ah well, these are the mysteries of XP :-) Cheers "David Candy" wrote: All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys. If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. cd %UserProfile%\desktop for %%A in (*.lnk) do c:\findhotkey.vbs "%%A" for %%A in (*.pif) do c:\findhotkey.vbs "%%A" for %%A in (*.url) do c:\findhotkey.vbs "%%A" cd %AllUsersProfile%\desktop for %%A in (*.lnk) do c:\findhotkey.vbs "%%A" for %%A in (*.pif) do c:\findhotkey.vbs "%%A" for %%A in (*.url) do c:\findhotkey.vbs "%%A" cd %UserProfile%\Start Menu for /r %%A in (*.lnk) do c:\findhotkey.vbs "%%A" for /r %%A in (*.pif) do c:\findhotkey.vbs "%%A" for /r %%A in (*.url) do c:\findhotkey.vbs "%%A" cd %AllUsersProfile%\Start Menu for /r %%A in (*.lnk) do c:\findhotkey.vbs "%%A" for /r %%A in (*.pif) do c:\findhotkey.vbs "%%A" for /r %%A in (*.url) do c:\findhotkey.vbs "%%A" |
#26
|
|||
|
|||
Shortcut keys cannot be re-used
Kool, David!
Beats the hell out of trying to use calculator to convert hex values from the wrong registry locations. LOL Thank you! I placed both FindHotkey.vbs & FindHotkeys.bat in C:\. Created a shortcut to FindHotkeys.bat. Double click FindHotkeys.bat shortcut rendered the following info. You may get a kick out of the first one. By the way, I use Alt+Ctrl+X for ClearClipboard.exe all the time. --------------------------- VBScript --------------------------- C:\Documents and Settings\All Users\Start Menu\UTILITIES\ClearClipboard.exe.lnkAlt+Ctrl+X --------------------------- OK --------------------------- COMPUTER DOCUMENTS.lnkAlt+Ctrl+C Post OE.lnkAlt+Ctrl+P UTILITIES.lnkAlt+Ctrl+U WINDOWS EXPLORER.lnkAlt+Ctrl+E C:\Documents and Settings\All Users\Start Menu\UTILITIES\regedit.exe.lnkAlt+Ctrl+R --- Ramesh is correct. "Watch David like a hawk", Ramesh, Microsoft MVP. -- Hope this helps. Let us know. Wes In , David Candy . hunted and pecked: It's worked out at boot time. Put that script into c:\ and the bat file then type c:\findhotkey.bat I had %1 instead of %A at the end of the line. Attached it as a bat file. Then you need to do clean boot troubleshooting http://support.microsoft.com/default...1&PA=1&SD=HSCH Hi David, Well, I managed to install TweakUI 1.33. It installs as a Control Panel icon, which I didn't expect. The Repair Hotkeys item was present, but using it made no difference, even after restarting. The Ctl-Alt-R combination still opens the Nero BurningRom Manual even there is no shortcut present with this set. I can't get your scripts to run - clearly there is something I am doing wrong. However, if they are intended to return the hotkeys for all shortcuts on the desktop and Start Menu, I can actually look at what is set one by one, although the fact that a key is retained after the shortcut is deleted means this may not give all the info. needed. At stage, solving this looks like being in the "too hard" basket Ah well, these are the mysteries of XP :-) Cheers "David Candy" wrote: All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys. If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#27
|
|||
|
|||
Shortcut keys cannot be re-used
David and Wes,
I must be as thick as a brick. I cannot get either of the two files to run. This is C:\findhotkey.vbs (copied exactly as David sent it - I have added START and END delimiters) START on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If END Double-clicking it caused a response from Norton "Alert:Malicious Script detected" I selected "Allow the entire script once" and pressed OK and I got absolutely nothing This is C:\findhotkeys.bat (modified as suggested by David so that "%A" is at the end of the line - I have added START and END delimiters) START cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" END I opened the Command Prompt, changed directory to C: (command cd \) and typed findhotkeys (to execute the .bat file of that name) The result was C:\cd C:\Documents and Settings\Trevor\ desktop A" was unexpected at this time. I restarted the computer and tried again with exactly the same result. I note that both of you have run this successfully, so what is dunderhead (namely me!) doing wrong? Cheers "David Candy" wrote: All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys. If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
#28
|
|||
|
|||
Shortcut keys cannot be re-used
Adding Start and End will stop it working.
I've attached both files to previous posts.=20 news://msnews.microsoft.com/#6wMCO40...TNGP10.phx.gbl news://msnews.microsoft.com/OZJYXC20...TNGP12.phx.gbl To view this newsgroup use news://msnews.microsoft.com/microsof...wsxp.customize In OE's main window you probably need to change the setting at=20 Tools - Options - Do Not Allow Attachments .... before you can use them. --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... David and Wes, I must be as thick as a brick. =20 I cannot get either of the two files to run. =20 This is C:\findhotkey.vbs (copied exactly as David sent it - I have = added=20 START and END delimiters) START on error resume next set WshShell =3D WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=3DWscript.Arguments If Ag.Count 0 then=20 For x =3D 0 to Ag.Count -1 A =3D A & Ag(x)=20 Next End If Set FSO =3D CreateObject("Scripting.FileSystemObject") f=3DFSO.GetFile(A) set lnk =3D WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If END =20 Double-clicking it caused a response from Norton "Alert:Malicious Script detected" =20 I selected "Allow the entire script once" and pressed OK and I got=20 absolutely nothing =20 This is C:\findhotkeys.bat (modified as suggested by David so that = "%A" is=20 at the end of the line - I have added START and END delimiters) START cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" END =20 I opened the Command Prompt, changed directory to C: (command cd \) = and=20 typed findhotkeys (to execute the .bat file of that name) =20 The result was C:\cd C:\Documents and Settings\Trevor\ desktop A" was unexpected at this time. =20 I restarted the computer and tried again with exactly the same result. =20 I note that both of you have run this successfully, so what is = dunderhead=20 (namely me!) doing wrong? =20 Cheers =20 =20 "David Candy" wrote: =20 All tweakui have features that the other don't. 1.33 was written for = new features introduced with Win ME / Win 2000. It's the only version to = repair hotkeys. =20 If you want to edit Add/Remove you need the first Tweakui for 95. =20 My whole point of joining in was to say those registry keys are = probably irrelevent. =20 When starting a program one can specify a hotkey for the main window. = A program can register a hotkey for it's own main window. Or it can = register global hotkeys (ie not just for the main window). =20 None of these are shortcut hotkeys. They are registered in memory. = Presumbably Explorer is registering global hot keys on startup and then = starts the whatever when windows tells explorer it has been pressed. But = that's a guess. =20 I've attached a script that prints hotkey in a msgbox, and include = the content in the body here =20 on error resume next set WshShell =3D WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=3DWscript.Arguments If Ag.Count 0 then=20 For x =3D 0 to Ag.Count -1 A =3D A & Ag(x)=20 Next End If Set FSO =3D CreateObject("Scripting.FileSystemObject") f=3DFSO.GetFile(A) set lnk =3D WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If =20 To use type cmd in start Run =20 Explorer looks in 4 places for hotkeys, these are read on startup. = The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the = four locations are live. =20 Type in a command prompt =20 cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" =20 Each shortcut, that has a hotkey, will pop up a dialog with the name = of the shortcut and it's hotkey. =20 You may have path problems. To make it work put in c:\ and change=20 =20 for %A in (*.url) do c:\findhotkey.vbs "%1" =20 as all these directory changes may make it difficult for the script = to be found (but shorten the amount of typing for the start menu FORs). =20 Ctrl + C Copies the text of a message box to the clipboard.=20 =20 It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + = left hand side Alt =3D Right hand side Alt and enters international = characters if using the US International keyboard. Also F12 is reserved = for the use of debuggers. =20 =20 =20 --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... David, Thanks. =20 So that is not the right place to look. =20 I set the hotkey in the normal way. I created a shortcut to the = Nero Manual=20 on the desktop and then set the key in the shortcut. I doubt that = Nero set=20 anything. =20 Yes, it was a shortcut that I deleted, but then I reinstated it and = set the=20 key to "none". I then used the same key in another program, which I = think=20 works the second way, i.e. the program registers the key. (Although = I wonder=20 where!) =20 I will have a look at Tweakui Ver 1.33 and see what I can find. I = already=20 have a version of TweakUI (File Version 2.10.0.0). If the other one = is later=20 and has more features, including repairing hot keys that would be = great. =20 Thanks for the help to date. =20 "David Candy" wrote: =20 The point is they are ONLY multi language hotkeys for use only = with multi language features. It is Soooooooooo unlikely to be under = here. =20 So there are two ways (apart from these multilingual features) of = setting a hotkey. In shortcuts on Start Menu or Desktop items. By a = program registering a hotkey when that program is started. =20 I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a = shortcut to an item you deleted and Windows found the closest match for = you)? =20 Tweakui Ver 1.33 has a repair hotkey feature.=20 = http://www.microsoft.com/NTWorkstati...etworking/NTT= weakUI.asp =20 --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Wes and David, =20 All good things come to an end. =20 I now find that Ctl-Alt-R invokes the old program again - Nero = BurningRom=20 Help Manual. (I have restarted the computer since it last worked = as I wanted.) =20 The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot = Keys follows =20 START Windows Registry Editor Version 5.00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:be,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:bc,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:47,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4b,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4c,00,00,00 END =20 It is difficult to understand what these mean, but I certainly = cannot find=20 any reference to Ctl-Alt-R =20 From what you (David) said,=20 Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! =20 So I assume that the reference to Ctl-Alt-R is not stored in Hot = Keys =20 Any ideas? =20 It doesn't have to involve Registry tweaking so long as I can = reuse the Key=20 (or any other key, for that matter) . =20 Cheers =20 "Wesley Vogel" wrote: =20 Trevor, =20 See David Candy's post. I mentioned that I couldn't read hex, = he can. =20 Glad to hear that you got it sorted out. =20 BTW, I'm still deciphering David's post. :-) And working on = 49 other things. =20 --=20 Hope this helps. Let us know. Wes =20 In news Trevor L. hunted and = pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds = good. Wes, I have yet to try your suggestions for the Registry, but am = looking forward to it. BTW, I have managed to assign the key I used before to the new = program. Whether this is the only way or not or whetehr it will = continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and = enetered the old shortcut key. I tested it and it worked (referring to the = old program). I then changed the key in that shortcut to "none" = and tried the shortcut key again - it did nothing (as one would = hope). I then allocated the key to the new program, tried it, and it worked = !! I still have the old shortcut with key set to "none", but = that's OK - I just moved it a general folder with other shortcuts - not = the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the = KB article I read (can't remember the number) said keys cannot = be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to = another program. As I say, there are only so many combinations one = can use before you run out of keys - 26 alpha, 10 numeric (and = perhaps the 12 Function keys although I have ever tried these, so I = don't know). I have already deleted the shortcut to the Nero Help Manual, = but before I did, I made sure that the shortcut key was set to = "(none)". Thanks for the info. as to how to find what key is assigned = to a particular shortcut, but since changing it to "(none)" and = deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut = key opens what program? Because the info. is retained after the shortcut itself is = deleted, I would assume that the info. must be stored in the = Registry. But I searched the registry for the value "BurningRom" (as the = name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that = I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific = program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete = the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you = can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut = icon. Right-click the program file or shortcut, and then click = Properties. 3. Click the Program tab for an MS-DOS program or the = Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and = pecked: I used to have a Shortcut Ctl-Alt-R which opened a User = manual (actually for Nero). I no longer want to do this as I am = fairly used to Nero now and can open it directly when I want to, = so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program = which will restart the PC. (I changed the setting in this program to = use this sequence.) But I find that using Ctl-Alt-R still invokes the User = manual. There was some info. on a Microsoft KB document re this = problem, but I can't get it to work. I made sure that the old = Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the = ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help = Manual. =20 |
#29
|
|||
|
|||
Shortcut keys cannot be re-used
Also in bat files what you type as %letter in a prompt you use =
%%letter in a bat (that is pretty much the only difference between = typing and bats). Again no start or end. Also the script is called once = for each shortcut. If you have 100 shortcuts you need to allow it to run = 100 times. Also it's safer when one has two executables of the same name to specify = the extension findhotkeys.bat although in this case bat have precedence over vbs. --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... David and Wes, I must be as thick as a brick. =20 I cannot get either of the two files to run. =20 This is C:\findhotkey.vbs (copied exactly as David sent it - I have = added=20 START and END delimiters) START on error resume next set WshShell =3D WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=3DWscript.Arguments If Ag.Count 0 then=20 For x =3D 0 to Ag.Count -1 A =3D A & Ag(x)=20 Next End If Set FSO =3D CreateObject("Scripting.FileSystemObject") f=3DFSO.GetFile(A) set lnk =3D WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If END =20 Double-clicking it caused a response from Norton "Alert:Malicious Script detected" =20 I selected "Allow the entire script once" and pressed OK and I got=20 absolutely nothing =20 This is C:\findhotkeys.bat (modified as suggested by David so that = "%A" is=20 at the end of the line - I have added START and END delimiters) START cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" END =20 I opened the Command Prompt, changed directory to C: (command cd \) = and=20 typed findhotkeys (to execute the .bat file of that name) =20 The result was C:\cd C:\Documents and Settings\Trevor\ desktop A" was unexpected at this time. =20 I restarted the computer and tried again with exactly the same result. =20 I note that both of you have run this successfully, so what is = dunderhead=20 (namely me!) doing wrong? =20 Cheers =20 =20 "David Candy" wrote: =20 All tweakui have features that the other don't. 1.33 was written for = new features introduced with Win ME / Win 2000. It's the only version to = repair hotkeys. =20 If you want to edit Add/Remove you need the first Tweakui for 95. =20 My whole point of joining in was to say those registry keys are = probably irrelevent. =20 When starting a program one can specify a hotkey for the main window. = A program can register a hotkey for it's own main window. Or it can = register global hotkeys (ie not just for the main window). =20 None of these are shortcut hotkeys. They are registered in memory. = Presumbably Explorer is registering global hot keys on startup and then = starts the whatever when windows tells explorer it has been pressed. But = that's a guess. =20 I've attached a script that prints hotkey in a msgbox, and include = the content in the body here =20 on error resume next set WshShell =3D WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=3DWscript.Arguments If Ag.Count 0 then=20 For x =3D 0 to Ag.Count -1 A =3D A & Ag(x)=20 Next End If Set FSO =3D CreateObject("Scripting.FileSystemObject") f=3DFSO.GetFile(A) set lnk =3D WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If =20 To use type cmd in start Run =20 Explorer looks in 4 places for hotkeys, these are read on startup. = The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the = four locations are live. =20 Type in a command prompt =20 cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" =20 Each shortcut, that has a hotkey, will pop up a dialog with the name = of the shortcut and it's hotkey. =20 You may have path problems. To make it work put in c:\ and change=20 =20 for %A in (*.url) do c:\findhotkey.vbs "%1" =20 as all these directory changes may make it difficult for the script = to be found (but shorten the amount of typing for the start menu FORs). =20 Ctrl + C Copies the text of a message box to the clipboard.=20 =20 It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + = left hand side Alt =3D Right hand side Alt and enters international = characters if using the US International keyboard. Also F12 is reserved = for the use of debuggers. =20 =20 =20 --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... David, Thanks. =20 So that is not the right place to look. =20 I set the hotkey in the normal way. I created a shortcut to the = Nero Manual=20 on the desktop and then set the key in the shortcut. I doubt that = Nero set=20 anything. =20 Yes, it was a shortcut that I deleted, but then I reinstated it and = set the=20 key to "none". I then used the same key in another program, which I = think=20 works the second way, i.e. the program registers the key. (Although = I wonder=20 where!) =20 I will have a look at Tweakui Ver 1.33 and see what I can find. I = already=20 have a version of TweakUI (File Version 2.10.0.0). If the other one = is later=20 and has more features, including repairing hot keys that would be = great. =20 Thanks for the help to date. =20 "David Candy" wrote: =20 The point is they are ONLY multi language hotkeys for use only = with multi language features. It is Soooooooooo unlikely to be under = here. =20 So there are two ways (apart from these multilingual features) of = setting a hotkey. In shortcuts on Start Menu or Desktop items. By a = program registering a hotkey when that program is started. =20 I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a = shortcut to an item you deleted and Windows found the closest match for = you)? =20 Tweakui Ver 1.33 has a repair hotkey feature.=20 = http://www.microsoft.com/NTWorkstati...etworking/NTT= weakUI.asp =20 --=20 ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message = ... Wes and David, =20 All good things come to an end. =20 I now find that Ctl-Alt-R invokes the old program again - Nero = BurningRom=20 Help Manual. (I have restarted the computer since it last worked = as I wanted.) =20 The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot = Keys follows =20 START Windows Registry Editor Version 5.00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:be,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=3Dhex:02,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=3Dhex:04,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:20,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:bc,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:47,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4b,00,00,00 =20 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=3Dhex:03,c0,00,00 "Target IME"=3Dhex:00,00,00,00 "Virtual Key"=3Dhex:4c,00,00,00 END =20 It is difficult to understand what these mean, but I certainly = cannot find=20 any reference to Ctl-Alt-R =20 From what you (David) said,=20 Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! =20 So I assume that the reference to Ctl-Alt-R is not stored in Hot = Keys =20 Any ideas? =20 It doesn't have to involve Registry tweaking so long as I can = reuse the Key=20 (or any other key, for that matter) . =20 Cheers =20 "Wesley Vogel" wrote: =20 Trevor, =20 See David Candy's post. I mentioned that I couldn't read hex, = he can. =20 Glad to hear that you got it sorted out. =20 BTW, I'm still deciphering David's post. :-) And working on = 49 other things. =20 --=20 Hope this helps. Let us know. Wes =20 In news Trevor L. hunted and = pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds = good. Wes, I have yet to try your suggestions for the Registry, but am = looking forward to it. BTW, I have managed to assign the key I used before to the new = program. Whether this is the only way or not or whetehr it will = continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and = enetered the old shortcut key. I tested it and it worked (referring to the = old program). I then changed the key in that shortcut to "none" = and tried the shortcut key again - it did nothing (as one would = hope). I then allocated the key to the new program, tried it, and it worked = !! I still have the old shortcut with key set to "none", but = that's OK - I just moved it a general folder with other shortcuts - not = the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the = KB article I read (can't remember the number) said keys cannot = be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to = another program. As I say, there are only so many combinations one = can use before you run out of keys - 26 alpha, 10 numeric (and = perhaps the 12 Function keys although I have ever tried these, so I = don't know). I have already deleted the shortcut to the Nero Help Manual, = but before I did, I made sure that the shortcut key was set to = "(none)". Thanks for the info. as to how to find what key is assigned = to a particular shortcut, but since changing it to "(none)" and = deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut = key opens what program? Because the info. is retained after the shortcut itself is = deleted, I would assume that the info. must be stored in the = Registry. But I searched the registry for the value "BurningRom" (as the = name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that = I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific = program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete = the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you = can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut = icon. Right-click the program file or shortcut, and then click = Properties. 3. Click the Program tab for an MS-DOS program or the = Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and = pecked: I used to have a Shortcut Ctl-Alt-R which opened a User = manual (actually for Nero). I no longer want to do this as I am = fairly used to Nero now and can open it directly when I want to, = so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program = which will restart the PC. (I changed the setting in this program to = use this sequence.) But I find that using Ctl-Alt-R still invokes the User = manual. There was some info. on a Microsoft KB document re this = problem, but I can't get it to work. I made sure that the old = Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the = ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help = Manual. =20 |
#30
|
|||
|
|||
Shortcut keys cannot be re-used
David,
My apologies, I simply meant that the text of the file was everything between (but not including) START and END. I will review the newsgroup entires and see if this helps me. I don't know whether I have said before, but I spent most of my professional life as one of these (now almost obsolete!!) Mainframe programmers, who has only recently - at least in my time scale - had to come to grips with PCs. So I am still a learner on many things. I appreciate the help I have received from the Newsgroup. "David Candy" wrote: Adding Start and End will stop it working. I've attached both files to previous posts. news://msnews.microsoft.com/#6wMCO40...TNGP10.phx.gbl news://msnews.microsoft.com/OZJYXC20...TNGP12.phx.gbl To view this newsgroup use news://msnews.microsoft.com/microsof...wsxp.customize In OE's main window you probably need to change the setting at Tools - Options - Do Not Allow Attachments .... before you can use them. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David and Wes, I must be as thick as a brick. I cannot get either of the two files to run. This is C:\findhotkey.vbs (copied exactly as David sent it - I have added START and END delimiters) START on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If END Double-clicking it caused a response from Norton "Alert:Malicious Script detected" I selected "Allow the entire script once" and pressed OK and I got absolutely nothing This is C:\findhotkeys.bat (modified as suggested by David so that "%A" is at the end of the line - I have added START and END delimiters) START cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%A" for %A in (*.pif) do findhotkey.vbs "%A" for %A in (*.url) do findhotkey.vbs "%A" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%A" for /r %A in (*.pif) do findhotkey.vbs "%A" for /r %A in (*.url) do findhotkey.vbs "%A" END I opened the Command Prompt, changed directory to C: (command cd \) and typed findhotkeys (to execute the .bat file of that name) The result was C:\cd C:\Documents and Settings\Trevor\ desktop A" was unexpected at this time. I restarted the computer and tried again with exactly the same result. I note that both of you have run this successfully, so what is dunderhead (namely me!) doing wrong? Cheers "David Candy" wrote: All tweakui have features that the other don't. 1.33 was written for new features introduced with Win ME / Win 2000. It's the only version to repair hotkeys. If you want to edit Add/Remove you need the first Tweakui for 95. My whole point of joining in was to say those registry keys are probably irrelevent. When starting a program one can specify a hotkey for the main window. A program can register a hotkey for it's own main window. Or it can register global hotkeys (ie not just for the main window). None of these are shortcut hotkeys. They are registered in memory. Presumbably Explorer is registering global hot keys on startup and then starts the whatever when windows tells explorer it has been pressed. But that's a guess. I've attached a script that prints hotkey in a msgbox, and include the content in the body here on error resume next set WshShell = WScript.CreateObject("WScript.Shell") Dim A Dim Ag Set Ag=Wscript.Arguments If Ag.Count 0 then For x = 0 to Ag.Count -1 A = A & Ag(x) Next End If Set FSO = CreateObject("Scripting.FileSystemObject") f=FSO.GetFile(A) set lnk = WshShell.CreateShortcut(A) If lnk.hotkey "" then msgbox A & vbcrlf & lnk.hotkey End If To use type cmd in start Run Explorer looks in 4 places for hotkeys, these are read on startup. The hotkey is stored in the shortcut. Only hotkeys on shortcuts in the four locations are live. Type in a command prompt cd %UserProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\desktop for %A in (*.lnk) do findhotkey.vbs "%1" for %A in (*.pif) do findhotkey.vbs "%1" for %A in (*.url) do findhotkey.vbs "%1" cd %UserProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" cd %AllUsersProfile%\Start Menu for /r %A in (*.lnk) do findhotkey.vbs "%1" for /r %A in (*.pif) do findhotkey.vbs "%1" for /r %A in (*.url) do findhotkey.vbs "%1" Each shortcut, that has a hotkey, will pop up a dialog with the name of the shortcut and it's hotkey. You may have path problems. To make it work put in c:\ and change for %A in (*.url) do c:\findhotkey.vbs "%1" as all these directory changes may make it difficult for the script to be found (but shorten the amount of typing for the start menu FORs). Ctrl + C Copies the text of a message box to the clipboard. It is not reccommended that Ctrl + Alt be used with Hotkeys. Ctrl + left hand side Alt = Right hand side Alt and enters international characters if using the US International keyboard. Also F12 is reserved for the use of debuggers. -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... David, Thanks. So that is not the right place to look. I set the hotkey in the normal way. I created a shortcut to the Nero Manual on the desktop and then set the key in the shortcut. I doubt that Nero set anything. Yes, it was a shortcut that I deleted, but then I reinstated it and set the key to "none". I then used the same key in another program, which I think works the second way, i.e. the program registers the key. (Although I wonder where!) I will have a look at Tweakui Ver 1.33 and see what I can find. I already have a version of TweakUI (File Version 2.10.0.0). If the other one is later and has more features, including repairing hot keys that would be great. Thanks for the help to date. "David Candy" wrote: The point is they are ONLY multi language hotkeys for use only with multi language features. It is Soooooooooo unlikely to be under here. So there are two ways (apart from these multilingual features) of setting a hotkey. In shortcuts on Start Menu or Desktop items. By a program registering a hotkey when that program is started. I presume Nero doesn't do this? You have checked all shortcuts (after all it could be in a shortcut to an item you deleted and Windows found the closest match for you)? Tweakui Ver 1.33 has a repair hotkey feature. http://www.microsoft.com/NTWorkstati.../NTTweakUI.asp -- ---------------------------------------------------------- http://www.uscricket.com "Trevor L." wrote in message ... Wes and David, All good things come to an end. I now find that Ctl-Alt-R invokes the old program again - Nero BurningRom Help Manual. (I have restarted the computer since it last worked as I wanted.) The contents of HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys follows START Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys] [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000010] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000011] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000012] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:be,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000070] "Key Modifiers"=hex:02,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000071] "Key Modifiers"=hex:04,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:20,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000072] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:bc,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000200] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:47,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000201] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4b,00,00,00 [HKEY_CURRENT_USER\Control Panel\Input Method\Hot Keys\00000202] "Key Modifiers"=hex:03,c0,00,00 "Target IME"=hex:00,00,00,00 "Virtual Key"=hex:4c,00,00,00 END It is difficult to understand what these mean, but I certainly cannot find any reference to Ctl-Alt-R From what you (David) said, Ctl-Alt should be &H03 R should be &H52 This combination does not appear anywhere! So I assume that the reference to Ctl-Alt-R is not stored in Hot Keys Any ideas? It doesn't have to involve Registry tweaking so long as I can reuse the Key (or any other key, for that matter) . Cheers "Wesley Vogel" wrote: Trevor, See David Candy's post. I mentioned that I couldn't read hex, he can. Glad to hear that you got it sorted out. BTW, I'm still deciphering David's post. :-) And working on 49 other things. -- Hope this helps. Let us know. Wes In news Trevor L. hunted and pecked: Zulu and Wes, Thanks to you both Zulu, Yes, I will set the shortcut key as you suggested. I will try different keys, including Function keys - sounds good. Wes, I have yet to try your suggestions for the Registry, but am looking forward to it. BTW, I have managed to assign the key I used before to the new program. Whether this is the only way or not or whetehr it will continue to work, I don't know, but here is what I did. I re-created the old Shortcut (it had been deleted) and enetered the old shortcut key. I tested it and it worked (referring to the old program). I then changed the key in that shortcut to "none" and tried the shortcut key again - it did nothing (as one would hope). I then allocated the key to the new program, tried it, and it worked !! I still have the old shortcut with key set to "none", but that's OK - I just moved it a general folder with other shortcuts - not the desktop, which I don't want cluttered. I don't know whether this is worth posting anywhere, as the KB article I read (can't remember the number) said keys cannot be reallocated, as did you , Wes. Many thanks "Trevor L." wrote: Wes, I am disappointed that I can't reassign a shortcut key to another program. As I say, there are only so many combinations one can use before you run out of keys - 26 alpha, 10 numeric (and perhaps the 12 Function keys although I have ever tried these, so I don't know). I have already deleted the shortcut to the Nero Help Manual, but before I did, I made sure that the shortcut key was set to "(none)". Thanks for the info. as to how to find what key is assigned to a particular shortcut, but since changing it to "(none)" and deleting it makes no difference, it sort of doesn't help too much. Do you know where the info. is stored as to what shortcut key opens what program? Because the info. is retained after the shortcut itself is deleted, I would assume that the info. must be stored in the Registry. But I searched the registry for the value "BurningRom" (as the name of the program opened by the shortcut key is "C:\Program Files\Ahead\Nero\NeroBurningRom_Eng.pdf"). But no entry that I found seemed to contain any info. about shortcut key values. If I could edit the registry to remove/change shortcut key assignments, that would solve the problem. Many thanks "Wesley Vogel" wrote: Once you assign a shortcut key combination for a specific program, you will not be able to use that key combination with other programs. Find the Nero Help Manual or the shortcut to same. Delete the shortcut, if it exists. Follow the instructions below if no shortcut. If you forget the key combination for your shortcut, you can follow steps 2 through 3 and review your shortcut keys. 2. Locate the program file (.exe) or the program's shortcut icon. Right-click the program file or shortcut, and then click Properties. 3. Click the Program tab for an MS-DOS program or the Shortcut tab for a Windows program. -- Hope this helps. Let us know. Wes In , Trevor L. hunted and pecked: I used to have a Shortcut Ctl-Alt-R which opened a User manual (actually for Nero). I no longer want to do this as I am fairly used to Nero now and can open it directly when I want to, so I changed the key to (none). I later decided to re-use Ctl-Alt-R to invoke a program which will restart the PC. (I changed the setting in this program to use this sequence.) But I find that using Ctl-Alt-R still invokes the User manual. There was some info. on a Microsoft KB document re this problem, but I can't get it to work. I made sure that the old Shortcut had (none), then deleted it. As there are limited letters to use with Ctl-Alt, the ability to reuse them is important. Can anyone help? However, the Ctl-Alt-R sequence still opend the Help Manual. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Custom Shortcut Keys - List / Remove | Scott | The Basics | 1 | October 28th 04 06:25 PM |
HOWTO: Query registered shortcut keys | Craig | General XP issues or comments | 5 | October 27th 04 03:44 PM |
Shortcut keys de-activated | bb | The Basics | 1 | October 5th 04 05:20 PM |
Run Shortcut keys | Baja | General XP issues or comments | 1 | September 20th 04 05:04 PM |
shortcut keys | Art The Computer Kid | General XP issues or comments | 0 | September 1st 04 06:25 PM |