If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Internet Connection Sharing Problem!!
Hi all!!
I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. |
Ads |
#2
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#3
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#4
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#5
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#6
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#7
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#8
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#9
|
|||
|
|||
Internet Connection Sharing Problem!!
In article , "Asad Ul-Islam"
wrote: Hi all!! I have recenlty installed WinXP Sp2 Rc1 on my PC. Now i have scenario that i have 2 Pcs both having WinXP with RC1 of Sp2. Now i Connect PC1 with Dailup having Internet Connection Sharing Enabled. It used to work pretty fine for me. after i installed its not working. it did once worked.. but since then other PC is unable to get Dynamic IP from PC1. I have tried Running Network Setup Wizard many time but no Use. {if other PC is assigned static IP. Lan works and both PCs can ping each other) What can be the possible PRoblem?? is it due to Sp2 or soem other cause?? help me out [note: if i make pc2 a sever and set my PC1 to get Dynamic IP it works fine] REgards, ASAD. The problem could be with the new Windows Firewall. Run the Network Setup Wizard on each computer, setting up the main PC as an ICS host and the other PC as an ICS client. The Wizard should automatically make all the right settings, including the ones for the firewall. If it asks, tell the Wizard that you want to allow file sharing between the computers. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
Thread Tools | |
Display Modes | |
|
|