If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#16
|
|||
|
|||
New Application problems - cardfile
I got caught by the same switch that happened in one of the Updates.
Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
Ads |
#17
|
|||
|
|||
New Application problems - cardfile
I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
#18
|
|||
|
|||
New Application problems - cardfile
Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile – application – description Windows Cardfile 2. Address file – crd file – opens with “unknown application” (when I browse I can only have Windows CardSpace which will not work). For me to open this file, I have to open the application (1.) first and then use it to open this address file. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
#19
|
|||
|
|||
New Application problems - cardfile
Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile – application – description Windows Cardfile 2. Address file – crd file – opens with “unknown application” (when I browse I can only have Windows CardSpace which will not work). For me to open this file, I have to open the application (1.) first and then use it to open this address file. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
#20
|
|||
|
|||
New Application problems - cardfile
Umm, sorry, guess I'm not being concise enough: See inline please and
I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? 2. Address file - crd file - opens with "unknown application" (when I ---------- fname.crd files, right? Where "fname" is whatever name you chose to give your cardfile. browse I can only have Windows CardSpace which will not work). Because you have not installed CardSpace, right? Whatever update made the changes, they are set for the program called CardSpace, which took away your settings for CardFile because they each use .crd datafiles. Since you do not want to use CardSpace, then the following should work for CardFile. For me to open this file, I have to open the application (1.) first and then use it to open this address file. Sounds right; Been there, Done that. I'm going to make up paths here. Change the paths to match your own folder/file names instead. -- Cardfile.exe is located in c:\Program Files\Cardfile\, right? The folder Cardfile contains the file cardfile.exe. The full path would be: "C:\Program Files\Cardfile\cardfile.exe". The quotes are necessary because there is a space used in one of the folders; namely Program Files. Always remember the quotes. C: Program Files Cardfile Cardfile.exe -- Usually the data files for Cardfile (the *.crd files) default location is the same as the program, but not necessarily. For this example, let's keep them in the same folder; "C:\Program Files\Cardfile\fname.crd. Where "fname" is the name you decided to use for the data file. OK, let's take it from where we know you have cardfile.exe in the c:\program files\cardfile\ folder. In Explorer, it'll look something like this: C: Program Files Cardfile cardfile.exe fname.crd If you don't have an fname.crd there, create one. It's just a text file. -- Open Notepad and place one space at the beginning of the page; nothing else. -- Save the file to C:\Program Files\Cardfile\fname.crd where fname is any name of your choosing. To keep from saving it with a .txt extension, in the Save As Type bottom box, choose "*.* All Files" and then type in the full filename, fname.crd and click Save or OK, whichever it is. Back to windows Explorer; find C:\Program Files\Cardfile\fname.crd and -- Highlight (click on) fname.crd, or whatever filename you used. "fname" is OK for a filename if you want to. It can always be Renamed later on. -- Right click on fname.crd and note the list of options that drops down. -- Highlight Send To in that list that dropped down and then click on "Desktop (Create Shortcut). There should be a shortcut for fname,crd on the desktop now. For now it won't do much if you click on it. SET THE FILE ASSOCIATION: -- In windows Explorer, click Tools; Folder Options. -- In Folder Options, click the File Types tab. -- If there is already a .crd entry, click Change -- If there is no .crd entry, click NEW and add the CRD extenstion (WITHOUT the dot (.)). -- Now there is a CRD entry to work on. -- Find the CRD entry -- Click Change -- Fill in the required data by browsing to cardfile.exe and click on it, then click OK. If it's not in the list, which it probably isn't, then use the Browser feature to naviaget to the cardfile.exe file and choos it that way. --------------------------------- SET COMPATABILITY: MIght's well save a later question and set the compatability mode for it right now. Assuming your cardfile.exe is the one that came from windows 95 or 98, you should set the compatability accordingly. This MAY NOT be necessary; it wasn't for me, but sometimes it helps if things don't run quite right: -- Using Windows Explorer again, go to cardfile.exe again, which is in c:\program files\cardfile\. -- RIGHT click on cardfile.exe. -- In the list of options that drops down, click on Properties and the properties window will open. -- Click on the tab that says "Compatability". -- Click "Run this program in compatability mode for:" -- Click the down arrow on the right of the box, -- Choose windows 95 or windows 98, whichever version your cardfile came from. If you aren't sure, start with win95; it should work for both. If not, then try win98. ------------------------- You should now be able to click the fname.crd icon on the desktop that you made and start cardfile which will open with fname.crd displayed. If you already have a cardfile data file, then use that instead for your fname.crd. fname.crd was just a placeholder to let things get started but if you have a real file, then go ahead and use that instead. Just be sure to use a copy of it, not the original - mistakes do happen. I've done my best to not leave anything out here, but if I have, you'll discover it simply by being sure to read each screen before you leave it. Most of what I've said here is also given in the various dialog boxes as you go through these steps, but hopefully with a bit better context. If it still doesn't work, be sure to be as explicit as you can when you describe what happened when and how. Quote the full text of any error messages and exactly what step you performed when you got the message, and what you did next. Too much data is not a problem. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) That should also have worked. The only difference between this and all the above is that you have to create such a shortcut every time you want to do something different. You should NOT have used MY path with Rolodex in it, but instead YOUR OWN path to where the files are. Still using the same example file structure as above, the path in that case would be: "C:\program files\cardfile\cardfile.exe" "C:\program files\cardfile\fname.crd" --- INCLUDE these quotes! Remember, this is an EXAMPLE and I made up the path, although it should work if you do things exactly as I stated them. If, for instance you wanted to use a folder called "Phone Numbers" instead of "Cardfile", they you'd have to replace the 'cardfile" in the line above to "Phone Numbers" (no quotes, just used them for emphasis). Same for fname.crd. If your file was named, say, Port Skewitt Area.crd, then you're replace fname.crd with Port Skewitt Area.crd. See what I mean? You have to be sure to use YOUR file and folder names, not mine. If you're still having troubles and can't get it to work, I suggest we take the converstaion off-group so we can use HTML e-mails and include graphic images of these things. It's hard to describe pictorially things that are so much clearer in an image. Then once we get it working right, you can reply back to the group with what the final outcome was and whether you got things going. If you'd like to go offgroup, let me know and I'll give you a temporary address you can use to contact me. You'll have to do the same for me of course and I recommend you also use a temporary or throw-away address. HTH, Twayne` - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
#21
|
|||
|
|||
New Application problems - cardfile
Umm, sorry, guess I'm not being concise enough: See inline please and
I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? 2. Address file - crd file - opens with "unknown application" (when I ---------- fname.crd files, right? Where "fname" is whatever name you chose to give your cardfile. browse I can only have Windows CardSpace which will not work). Because you have not installed CardSpace, right? Whatever update made the changes, they are set for the program called CardSpace, which took away your settings for CardFile because they each use .crd datafiles. Since you do not want to use CardSpace, then the following should work for CardFile. For me to open this file, I have to open the application (1.) first and then use it to open this address file. Sounds right; Been there, Done that. I'm going to make up paths here. Change the paths to match your own folder/file names instead. -- Cardfile.exe is located in c:\Program Files\Cardfile\, right? The folder Cardfile contains the file cardfile.exe. The full path would be: "C:\Program Files\Cardfile\cardfile.exe". The quotes are necessary because there is a space used in one of the folders; namely Program Files. Always remember the quotes. C: Program Files Cardfile Cardfile.exe -- Usually the data files for Cardfile (the *.crd files) default location is the same as the program, but not necessarily. For this example, let's keep them in the same folder; "C:\Program Files\Cardfile\fname.crd. Where "fname" is the name you decided to use for the data file. OK, let's take it from where we know you have cardfile.exe in the c:\program files\cardfile\ folder. In Explorer, it'll look something like this: C: Program Files Cardfile cardfile.exe fname.crd If you don't have an fname.crd there, create one. It's just a text file. -- Open Notepad and place one space at the beginning of the page; nothing else. -- Save the file to C:\Program Files\Cardfile\fname.crd where fname is any name of your choosing. To keep from saving it with a .txt extension, in the Save As Type bottom box, choose "*.* All Files" and then type in the full filename, fname.crd and click Save or OK, whichever it is. Back to windows Explorer; find C:\Program Files\Cardfile\fname.crd and -- Highlight (click on) fname.crd, or whatever filename you used. "fname" is OK for a filename if you want to. It can always be Renamed later on. -- Right click on fname.crd and note the list of options that drops down. -- Highlight Send To in that list that dropped down and then click on "Desktop (Create Shortcut). There should be a shortcut for fname,crd on the desktop now. For now it won't do much if you click on it. SET THE FILE ASSOCIATION: -- In windows Explorer, click Tools; Folder Options. -- In Folder Options, click the File Types tab. -- If there is already a .crd entry, click Change -- If there is no .crd entry, click NEW and add the CRD extenstion (WITHOUT the dot (.)). -- Now there is a CRD entry to work on. -- Find the CRD entry -- Click Change -- Fill in the required data by browsing to cardfile.exe and click on it, then click OK. If it's not in the list, which it probably isn't, then use the Browser feature to naviaget to the cardfile.exe file and choos it that way. --------------------------------- SET COMPATABILITY: MIght's well save a later question and set the compatability mode for it right now. Assuming your cardfile.exe is the one that came from windows 95 or 98, you should set the compatability accordingly. This MAY NOT be necessary; it wasn't for me, but sometimes it helps if things don't run quite right: -- Using Windows Explorer again, go to cardfile.exe again, which is in c:\program files\cardfile\. -- RIGHT click on cardfile.exe. -- In the list of options that drops down, click on Properties and the properties window will open. -- Click on the tab that says "Compatability". -- Click "Run this program in compatability mode for:" -- Click the down arrow on the right of the box, -- Choose windows 95 or windows 98, whichever version your cardfile came from. If you aren't sure, start with win95; it should work for both. If not, then try win98. ------------------------- You should now be able to click the fname.crd icon on the desktop that you made and start cardfile which will open with fname.crd displayed. If you already have a cardfile data file, then use that instead for your fname.crd. fname.crd was just a placeholder to let things get started but if you have a real file, then go ahead and use that instead. Just be sure to use a copy of it, not the original - mistakes do happen. I've done my best to not leave anything out here, but if I have, you'll discover it simply by being sure to read each screen before you leave it. Most of what I've said here is also given in the various dialog boxes as you go through these steps, but hopefully with a bit better context. If it still doesn't work, be sure to be as explicit as you can when you describe what happened when and how. Quote the full text of any error messages and exactly what step you performed when you got the message, and what you did next. Too much data is not a problem. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) That should also have worked. The only difference between this and all the above is that you have to create such a shortcut every time you want to do something different. You should NOT have used MY path with Rolodex in it, but instead YOUR OWN path to where the files are. Still using the same example file structure as above, the path in that case would be: "C:\program files\cardfile\cardfile.exe" "C:\program files\cardfile\fname.crd" --- INCLUDE these quotes! Remember, this is an EXAMPLE and I made up the path, although it should work if you do things exactly as I stated them. If, for instance you wanted to use a folder called "Phone Numbers" instead of "Cardfile", they you'd have to replace the 'cardfile" in the line above to "Phone Numbers" (no quotes, just used them for emphasis). Same for fname.crd. If your file was named, say, Port Skewitt Area.crd, then you're replace fname.crd with Port Skewitt Area.crd. See what I mean? You have to be sure to use YOUR file and folder names, not mine. If you're still having troubles and can't get it to work, I suggest we take the converstaion off-group so we can use HTML e-mails and include graphic images of these things. It's hard to describe pictorially things that are so much clearer in an image. Then once we get it working right, you can reply back to the group with what the final outcome was and whether you got things going. If you'd like to go offgroup, let me know and I'll give you a temporary address you can use to contact me. You'll have to do the same for me of course and I recommend you also use a temporary or throw-away address. HTH, Twayne` - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" [HKEY_CLASSES_ROOT\win.cardfile] [HKEY_CLASSES_ROOT\win.cardfile\DefaultIcon] @="C:\\WINDOWS\\cardfile.exe" After diong thiswhen the specific file (rolodex.crf) is double- clicked, the CARDFILE application opens, but with a blank uintitled file displayed. CLicking on FILE/OPEN, a dialog window appears with the appropriate file type and in the file list, the filename rolodex.crf is there. Double-clicking the filename brings up the file with the right entries. What am I doing wrong to not have the app open the file upon dbl- click ? I don't have much hair left to pull out. HELP! |
#22
|
|||
|
|||
New Application problems - cardfile
In message , Twayne
writes: Umm, sorry, guess I'm not being concise enough: See inline please and I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? [] I suspect he may well have "hide extensions for known filetypes" (or whatever the wording is) turned on - after all, that is the default, I think. I'm pretty sure that would hide the ".exe" part of names. In his shortcut, he may also need the ".exe"; I'm still not clear when DOS/Windows needs the .exe and when it doesn't, but always putting it in (e. g. in shortcuts) doesn't seem to hurt. -- J. P. Gilliver. UMRA: 1960/1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf ** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously outdated thoughts on PCs. ** "If just one child is saved, then we'll have created a police state for the benefit of just one child." |
#23
|
|||
|
|||
New Application problems - cardfile
In message , Twayne
writes: Umm, sorry, guess I'm not being concise enough: See inline please and I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? [] I suspect he may well have "hide extensions for known filetypes" (or whatever the wording is) turned on - after all, that is the default, I think. I'm pretty sure that would hide the ".exe" part of names. In his shortcut, he may also need the ".exe"; I'm still not clear when DOS/Windows needs the .exe and when it doesn't, but always putting it in (e. g. in shortcuts) doesn't seem to hurt. -- J. P. Gilliver. UMRA: 1960/1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf ** http://www.soft255.demon.co.uk/G6JPG-PC/JPGminPC.htm for ludicrously outdated thoughts on PCs. ** "If just one child is saved, then we'll have created a police state for the benefit of just one child." |
#24
|
|||
|
|||
New Application problems - cardfile
Thank you so much for all this. Just back from a trip and will work through
all this. Just for clarity (I've seen the comments on .exe) I only have: Cardfile.exe 91kb application - which I open first Address.crd 134kb crd file - my address book which I then open through the above The only other file I have is Cards.dll 146kb Application extension - which I never touch (it's just come with me along the way) All these files are in My Documents. In C:Program Files, I have no cardfile folder. I have NOT installed CardSpace. Does that change anything? I'll let you know how it goes. "Twayne" wrote: Umm, sorry, guess I'm not being concise enough: See inline please and I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? 2. Address file - crd file - opens with "unknown application" (when I ---------- fname.crd files, right? Where "fname" is whatever name you chose to give your cardfile. browse I can only have Windows CardSpace which will not work). Because you have not installed CardSpace, right? Whatever update made the changes, they are set for the program called CardSpace, which took away your settings for CardFile because they each use .crd datafiles. Since you do not want to use CardSpace, then the following should work for CardFile. For me to open this file, I have to open the application (1.) first and then use it to open this address file. Sounds right; Been there, Done that. I'm going to make up paths here. Change the paths to match your own folder/file names instead. -- Cardfile.exe is located in c:\Program Files\Cardfile\, right? The folder Cardfile contains the file cardfile.exe. The full path would be: "C:\Program Files\Cardfile\cardfile.exe". The quotes are necessary because there is a space used in one of the folders; namely Program Files. Always remember the quotes. C: Program Files Cardfile Cardfile.exe -- Usually the data files for Cardfile (the *.crd files) default location is the same as the program, but not necessarily. For this example, let's keep them in the same folder; "C:\Program Files\Cardfile\fname.crd. Where "fname" is the name you decided to use for the data file. OK, let's take it from where we know you have cardfile.exe in the c:\program files\cardfile\ folder. In Explorer, it'll look something like this: C: Program Files Cardfile cardfile.exe fname.crd If you don't have an fname.crd there, create one. It's just a text file. -- Open Notepad and place one space at the beginning of the page; nothing else. -- Save the file to C:\Program Files\Cardfile\fname.crd where fname is any name of your choosing. To keep from saving it with a .txt extension, in the Save As Type bottom box, choose "*.* All Files" and then type in the full filename, fname.crd and click Save or OK, whichever it is. Back to windows Explorer; find C:\Program Files\Cardfile\fname.crd and -- Highlight (click on) fname.crd, or whatever filename you used. "fname" is OK for a filename if you want to. It can always be Renamed later on. -- Right click on fname.crd and note the list of options that drops down. -- Highlight Send To in that list that dropped down and then click on "Desktop (Create Shortcut). There should be a shortcut for fname,crd on the desktop now. For now it won't do much if you click on it. SET THE FILE ASSOCIATION: -- In windows Explorer, click Tools; Folder Options. -- In Folder Options, click the File Types tab. -- If there is already a .crd entry, click Change -- If there is no .crd entry, click NEW and add the CRD extenstion (WITHOUT the dot (.)). -- Now there is a CRD entry to work on. -- Find the CRD entry -- Click Change -- Fill in the required data by browsing to cardfile.exe and click on it, then click OK. If it's not in the list, which it probably isn't, then use the Browser feature to naviaget to the cardfile.exe file and choos it that way. --------------------------------- SET COMPATABILITY: MIght's well save a later question and set the compatability mode for it right now. Assuming your cardfile.exe is the one that came from windows 95 or 98, you should set the compatability accordingly. This MAY NOT be necessary; it wasn't for me, but sometimes it helps if things don't run quite right: -- Using Windows Explorer again, go to cardfile.exe again, which is in c:\program files\cardfile\. -- RIGHT click on cardfile.exe. -- In the list of options that drops down, click on Properties and the properties window will open. -- Click on the tab that says "Compatability". -- Click "Run this program in compatability mode for:" -- Click the down arrow on the right of the box, -- Choose windows 95 or windows 98, whichever version your cardfile came from. If you aren't sure, start with win95; it should work for both. If not, then try win98. ------------------------- You should now be able to click the fname.crd icon on the desktop that you made and start cardfile which will open with fname.crd displayed. If you already have a cardfile data file, then use that instead for your fname.crd. fname.crd was just a placeholder to let things get started but if you have a real file, then go ahead and use that instead. Just be sure to use a copy of it, not the original - mistakes do happen. I've done my best to not leave anything out here, but if I have, you'll discover it simply by being sure to read each screen before you leave it. Most of what I've said here is also given in the various dialog boxes as you go through these steps, but hopefully with a bit better context. If it still doesn't work, be sure to be as explicit as you can when you describe what happened when and how. Quote the full text of any error messages and exactly what step you performed when you got the message, and what you did next. Too much data is not a problem. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) That should also have worked. The only difference between this and all the above is that you have to create such a shortcut every time you want to do something different. You should NOT have used MY path with Rolodex in it, but instead YOUR OWN path to where the files are. Still using the same example file structure as above, the path in that case would be: "C:\program files\cardfile\cardfile.exe" "C:\program files\cardfile\fname.crd" --- INCLUDE these quotes! Remember, this is an EXAMPLE and I made up the path, although it should work if you do things exactly as I stated them. If, for instance you wanted to use a folder called "Phone Numbers" instead of "Cardfile", they you'd have to replace the 'cardfile" in the line above to "Phone Numbers" (no quotes, just used them for emphasis). Same for fname.crd. If your file was named, say, Port Skewitt Area.crd, then you're replace fname.crd with Port Skewitt Area.crd. See what I mean? You have to be sure to use YOUR file and folder names, not mine. If you're still having troubles and can't get it to work, I suggest we take the converstaion off-group so we can use HTML e-mails and include graphic images of these things. It's hard to describe pictorially things that are so much clearer in an image. Then once we get it working right, you can reply back to the group with what the final outcome was and whether you got things going. If you'd like to go offgroup, let me know and I'll give you a temporary address you can use to contact me. You'll have to do the same for me of course and I recommend you also use a temporary or throw-away address. HTH, Twayne` - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" |
#25
|
|||
|
|||
New Application problems - cardfile
Wow! It all worked! And it only took me 3 minutes (after weeks of trying alternatives). I am thrilled - thank you so much "Twayne" wrote: Umm, sorry, guess I'm not being concise enough: See inline please and I'll see what I can do to be clearer and very specific: "Switzerland calling" wrote in message Thank you for all your inputs. I have been trying to get to the bottom of this, but have hit a few obstacles: Let me recap what files I actually have in my folder (in case I am missing something obvious): 1. Cardfile - application - description Windows Cardfile -------------- Specifically, cardfile.exe, right? 2. Address file - crd file - opens with "unknown application" (when I ---------- fname.crd files, right? Where "fname" is whatever name you chose to give your cardfile. browse I can only have Windows CardSpace which will not work). Because you have not installed CardSpace, right? Whatever update made the changes, they are set for the program called CardSpace, which took away your settings for CardFile because they each use .crd datafiles. Since you do not want to use CardSpace, then the following should work for CardFile. For me to open this file, I have to open the application (1.) first and then use it to open this address file. Sounds right; Been there, Done that. I'm going to make up paths here. Change the paths to match your own folder/file names instead. -- Cardfile.exe is located in c:\Program Files\Cardfile\, right? The folder Cardfile contains the file cardfile.exe. The full path would be: "C:\Program Files\Cardfile\cardfile.exe". The quotes are necessary because there is a space used in one of the folders; namely Program Files. Always remember the quotes. C: Program Files Cardfile Cardfile.exe -- Usually the data files for Cardfile (the *.crd files) default location is the same as the program, but not necessarily. For this example, let's keep them in the same folder; "C:\Program Files\Cardfile\fname.crd. Where "fname" is the name you decided to use for the data file. OK, let's take it from where we know you have cardfile.exe in the c:\program files\cardfile\ folder. In Explorer, it'll look something like this: C: Program Files Cardfile cardfile.exe fname.crd If you don't have an fname.crd there, create one. It's just a text file. -- Open Notepad and place one space at the beginning of the page; nothing else. -- Save the file to C:\Program Files\Cardfile\fname.crd where fname is any name of your choosing. To keep from saving it with a .txt extension, in the Save As Type bottom box, choose "*.* All Files" and then type in the full filename, fname.crd and click Save or OK, whichever it is. Back to windows Explorer; find C:\Program Files\Cardfile\fname.crd and -- Highlight (click on) fname.crd, or whatever filename you used. "fname" is OK for a filename if you want to. It can always be Renamed later on. -- Right click on fname.crd and note the list of options that drops down. -- Highlight Send To in that list that dropped down and then click on "Desktop (Create Shortcut). There should be a shortcut for fname,crd on the desktop now. For now it won't do much if you click on it. SET THE FILE ASSOCIATION: -- In windows Explorer, click Tools; Folder Options. -- In Folder Options, click the File Types tab. -- If there is already a .crd entry, click Change -- If there is no .crd entry, click NEW and add the CRD extenstion (WITHOUT the dot (.)). -- Now there is a CRD entry to work on. -- Find the CRD entry -- Click Change -- Fill in the required data by browsing to cardfile.exe and click on it, then click OK. If it's not in the list, which it probably isn't, then use the Browser feature to naviaget to the cardfile.exe file and choos it that way. --------------------------------- SET COMPATABILITY: MIght's well save a later question and set the compatability mode for it right now. Assuming your cardfile.exe is the one that came from windows 95 or 98, you should set the compatability accordingly. This MAY NOT be necessary; it wasn't for me, but sometimes it helps if things don't run quite right: -- Using Windows Explorer again, go to cardfile.exe again, which is in c:\program files\cardfile\. -- RIGHT click on cardfile.exe. -- In the list of options that drops down, click on Properties and the properties window will open. -- Click on the tab that says "Compatability". -- Click "Run this program in compatability mode for:" -- Click the down arrow on the right of the box, -- Choose windows 95 or windows 98, whichever version your cardfile came from. If you aren't sure, start with win95; it should work for both. If not, then try win98. ------------------------- You should now be able to click the fname.crd icon on the desktop that you made and start cardfile which will open with fname.crd displayed. If you already have a cardfile data file, then use that instead for your fname.crd. fname.crd was just a placeholder to let things get started but if you have a real file, then go ahead and use that instead. Just be sure to use a copy of it, not the original - mistakes do happen. I've done my best to not leave anything out here, but if I have, you'll discover it simply by being sure to read each screen before you leave it. Most of what I've said here is also given in the various dialog boxes as you go through these steps, but hopefully with a bit better context. If it still doesn't work, be sure to be as explicit as you can when you describe what happened when and how. Quote the full text of any error messages and exactly what step you performed when you got the message, and what you did next. Too much data is not a problem. What I have tried: - I have tried to create a shortcut to the address file (2.) above and then change the target to "C:\Program Files\CARDFILE \Rolodex address.crd" but a. It cannot find the target and b. I do not have this Rolodex system you mention (I think..!) That should also have worked. The only difference between this and all the above is that you have to create such a shortcut every time you want to do something different. You should NOT have used MY path with Rolodex in it, but instead YOUR OWN path to where the files are. Still using the same example file structure as above, the path in that case would be: "C:\program files\cardfile\cardfile.exe" "C:\program files\cardfile\fname.crd" --- INCLUDE these quotes! Remember, this is an EXAMPLE and I made up the path, although it should work if you do things exactly as I stated them. If, for instance you wanted to use a folder called "Phone Numbers" instead of "Cardfile", they you'd have to replace the 'cardfile" in the line above to "Phone Numbers" (no quotes, just used them for emphasis). Same for fname.crd. If your file was named, say, Port Skewitt Area.crd, then you're replace fname.crd with Port Skewitt Area.crd. See what I mean? You have to be sure to use YOUR file and folder names, not mine. If you're still having troubles and can't get it to work, I suggest we take the converstaion off-group so we can use HTML e-mails and include graphic images of these things. It's hard to describe pictorially things that are so much clearer in an image. Then once we get it working right, you can reply back to the group with what the final outcome was and whether you got things going. If you'd like to go offgroup, let me know and I'll give you a temporary address you can use to contact me. You'll have to do the same for me of course and I recommend you also use a temporary or throw-away address. HTH, Twayne` - I also managed to do Tools/ Folder Options/ File Types and create a new CRD option (which then changed the suffix of my address file in (2.). But I am still not able to open it directly. I hope that I am not being dumb here. I appreciate any other ides you have, or advice on what I am not doing right, etc. Many thanks. "Twayne" wrote: I got caught by the same switch that happened in one of the Updates. Kind of rude to re-use a file extension like that, but they did it, so .... we have to live with it. The easiest way to fix it is to simply change the file association. Go to the .crd entry and you'll find it's set for CardSpace or whatever was added. Simply change the association back to CardFile and you'll be set to go. The only change MS made was to the file association for .crd. Open Windows Explorer. It doesn't matter to what drive or folder; any place is OK to use. -- Click Tools; Folder Options. -- Click the tab for File Types -- Scroll down thru the list to CRD -- Click Change and set it to use Cardfile instead of CardSpace or whatever it is now. If there is NO entry for CRD, then click New and create one. Just follow the instructions; browse to it, add it so it'll open crd files, and you should be good to go. Maybe the best way: Create your own Shortcut to it. Whatever the name of your cardfile data file is, say it's "fname.crd", make a new Shortcut and use the following for the Shortcut TARGET: "C:\Program Files\CARDFILE \Rolodex fname.crd" And again, you should be ready to go. I have two "rolodexes" so I have two shortcuts; one to the fname.crd for each file. My wife and I keep our own lists. Don't forget to use the quotes! HTH, Twayne` "Switzerland calling" wrote in message I have similar problem/ question, but on reviewing below, it is a bit too technical for me, and I'm looking to see if there is an "easy" option for me. To use the old Cardfiles I have to: - open Cardfile application, then - open specific .crd file i.e. I cannot directly open that .crd file It's no big deal as it's only one additional manipulation, but if there is an "idiots guide" to doing it simply I'd love to know. With thanks. "John Carter" wrote: We STILL have some CARDFILE files that don't warrant converting to a different application as the budget is not there and also because they are used so infrequently. (Not my idea to support them, but rather fiddle with them than look for a new job). Somethig in WIN XP changed the .CRD file type so that another app is now linked to them, but the format is wrong, so it doesn't work. I have the program CARDFILE.EXE, and the ast time we needed it, we just did a RT-CLICK/OPEN WITH/ and the Browse to the CARDFILE.EXE ffile and clicked ALWAYS USE. We had no problem. BUt now since this new app took over the .CRD file type, we cannot do thids anymore. I went to Registry and put in the following entries creating a new file type ".crf". The file CARDFILE.EXE was HEXEDITED to change the "CRD" occurrences to "CRF". Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open] [HKEY_CLASSES_ROOT\Applications\CARDFILE.EXE\shell\ open\command] @="\"C:\\WINDOWS\\CARDFILE.EXE\" \"%1\"" [HKEY_CLASSES_ROOT\.crf] @="win.cardfile" |
|
Thread Tools | |
Display Modes | |
|
|