adding memory

winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184 pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

For free diagnosis (with est. costs) go to www.crucial.com

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

For free diagnosis (with est. costs) go to www.crucial.com

--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)

Most likely yes but only run at 333
mobo make usually helps in a question like this

peter

--
If you find a posting or message from me offensive,inappropriate
or disruptive,please ignore it.
If you dont know how to ignore a posting complain
to me and I will be only too happy to demonstrate :-)

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Most likely yes but only run at 333
mobo make usually helps in a question like this

peter

--
If you find a posting or message from me offensive,inappropriate
or disruptive,please ignore it.
If you dont know how to ignore a posting complain
to me and I will be only too happy to demonstrate :-)

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

On Aug 4, 6:04*pm, "L.S." wrote:
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184 pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Normally, it is not recommended to "mix" the memory rated types,
especially if these are "non-brand" names like Kingston, Corsair or
Crucial. These 'generic" memory makers tend to make "inferior" cheap
module by cutting corners. These "cheap" modules a lot of times do
not work with other modules.

On Aug 4, 6:04*pm, "L.S." wrote:
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184 pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Normally, it is not recommended to "mix" the memory rated types,
especially if these are "non-brand" names like Kingston, Corsair or
Crucial. These 'generic" memory makers tend to make "inferior" cheap
module by cutting corners. These "cheap" modules a lot of times do
not work with other modules.

Most likely will be fine as long as the
voltage specs of the DDR400 meet
the motherboard requirements.

CPUID (CPU-Z)
http://www.cpuid.com/cpuz.php

Click on the SPD tab after you install the ram
and then use the pull down to check each memory stick.
(assuming it works)

--
JS
http://www.pagestart.com



"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Most likely will be fine as long as the
voltage specs of the DDR400 meet
the motherboard requirements.

CPUID (CPU-Z)
http://www.cpuid.com/cpuz.php

Click on the SPD tab after you install the ram
and then use the pull down to check each memory stick.
(assuming it works)

--
JS
http://www.pagestart.com



"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Thanks to all.
Just didn't want to mess up the system.
Will check voltage...

"JS" @ wrote in message ...
Most likely will be fine as long as the
voltage specs of the DDR400 meet
the motherboard requirements.

CPUID (CPU-Z)
http://www.cpuid.com/cpuz.php

Click on the SPD tab after you install the ram
and then use the pull down to check each memory stick.
(assuming it works)

--
JS
http://www.pagestart.com



"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead
of 1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Thanks to all.
Just didn't want to mess up the system.
Will check voltage...

"JS" @ wrote in message ...
Most likely will be fine as long as the
voltage specs of the DDR400 meet
the motherboard requirements.

CPUID (CPU-Z)
http://www.cpuid.com/cpuz.php

Click on the SPD tab after you install the ram
and then use the pull down to check each memory stick.
(assuming it works)

--
JS
http://www.pagestart.com



"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead
of 1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

This is a Hynix stick so not sure if that's good or not?
..

"smlunatick" wrote in message
...
On Aug 4, 6:04 pm, "L.S." wrote:
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Normally, it is not recommended to "mix" the memory rated types,
especially if these are "non-brand" names like Kingston, Corsair or
Crucial. These 'generic" memory makers tend to make "inferior" cheap
module by cutting corners. These "cheap" modules a lot of times do
not work with other modules.

This is a Hynix stick so not sure if that's good or not?
..

"smlunatick" wrote in message
...
On Aug 4, 6:04 pm, "L.S." wrote:
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead of
1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin
stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Normally, it is not recommended to "mix" the memory rated types,
especially if these are "non-brand" names like Kingston, Corsair or
Crucial. These 'generic" memory makers tend to make "inferior" cheap
module by cutting corners. These "cheap" modules a lot of times do
not work with other modules.

Mobo is a Biostar M7NCG 400


"peter" wrote in message
...
Most likely yes but only run at 333
mobo make usually helps in a question like this

peter

--
If you find a posting or message from me offensive,inappropriate
or disruptive,please ignore it.
If you dont know how to ignore a posting complain
to me and I will be only too happy to demonstrate :-)

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead
of 1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?

Mobo is a Biostar M7NCG 400


"peter" wrote in message
...
Most likely yes but only run at 333
mobo make usually helps in a question like this

peter

--
If you find a posting or message from me offensive,inappropriate
or disruptive,please ignore it.
If you dont know how to ignore a posting complain
to me and I will be only too happy to demonstrate :-)

"L.S." wrote in message
...
winxp(home).

One of my 512 memory stick went out. System only recognizes 512 instead
of 1gb. To check I took it out and tried it in another system- no go.
Here's the question and I know it's probably not correct newsgroup but
should be simple answer for you sys gurus.
The sticks are ddr333, 512meg, 184 pin. I have a extra ddr400, 1gb, 184
pin stick.
The instruction for the MB says up to 4 gig and ddr333.

Will the ddr400 work w/o messing up system?