A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Microsoft Messenger
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

4.7 messenger audio



 
 
Thread Tools Display Modes
  #16  
Old April 18th 04, 10:12 PM
Meg
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.

Ads
  #17  
Old April 18th 04, 10:14 PM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

Problem may be on their end.

Joel

"Meg" wrote in message
...
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If
you do then the system
is misconfigured. Double click the little
speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in
message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard
through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the
bottom
of it. I have contacted several people through
messenger
and it is always the same. I can hear them but they
dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not
have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out
there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can
post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get
the
lines from the mic when testing. sound does not
seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"
wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.



  #18  
Old April 18th 04, 10:14 PM
Meg
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.

  #19  
Old April 18th 04, 10:16 PM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

Problem may be on their end.

Joel

"Meg" wrote in message
...
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If
you do then the system
is misconfigured. Double click the little
speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in
message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard
through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the
bottom
of it. I have contacted several people through
messenger
and it is always the same. I can hear them but they
dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not
have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out
there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can
post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get
the
lines from the mic when testing. sound does not
seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"
wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.



  #20  
Old April 19th 04, 03:30 AM
steve
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured

properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses

and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get

some real funny
people contacting you.

Joel

"steve" wrote in

message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning

Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.

  #21  
Old April 19th 04, 03:32 AM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is
being selected during the running of the Wizard. If anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get
some real funny
people contacting you.

Joel

"steve" wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



  #22  
Old April 19th 04, 04:01 AM
steve
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured

properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses

and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get

some real funny
people contacting you.

Joel

"steve" wrote in

message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning

Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.

  #23  
Old April 19th 04, 04:07 AM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is
being selected during the running of the Wizard. If anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get
some real funny
people contacting you.

Joel

"steve" wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



  #24  
Old April 19th 04, 04:28 AM
Meg
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.

  #25  
Old April 19th 04, 04:30 AM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

Problem may be on their end.

Joel

"Meg" wrote in message
...
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If
you do then the system
is misconfigured. Double click the little
speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in
message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard
through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the
bottom
of it. I have contacted several people through
messenger
and it is always the same. I can hear them but they
dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not
have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out
there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can
post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get
the
lines from the mic when testing. sound does not
seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"
wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.



  #26  
Old April 19th 04, 05:32 AM
steve
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured

properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses

and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get

some real funny
people contacting you.

Joel

"steve" wrote in

message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning

Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.

  #27  
Old April 19th 04, 05:33 AM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is
being selected during the running of the Wizard. If anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still
cant hear me? I dont think i'll ever get to the bottom of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and make

sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN

THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people contacting me
but if you can think of anything else i'd apprecite it.
Also i notice that you say in the sound icon to uncheck
the mic in the playback mode. this does not seem to do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works perfectly
through yahoo messenger. this hs been really bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may get
some real funny
people contacting you.

Joel

"steve" wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when i

use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



  #28  
Old April 19th 04, 06:00 AM
Meg
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If

you do then the system
is misconfigured. Double click the little

speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in

message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard

through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the

bottom
of it. I have contacted several people through

messenger
and it is always the same. I can hear them but they

dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not

have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out

there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can

post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get

the
lines from the mic when testing. sound does not

seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"

wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.

  #29  
Old April 19th 04, 06:00 AM
Joel Estes
external usenet poster
 
Posts: n/a
Default 4.7 messenger audio

Problem may be on their end.

Joel

"Meg" wrote in message
...
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see
my picture-in-picture and my wizard seems fine. Any
solution today?

-----Original Message-----
I assume that the audio/video wizard runs properly!!!

Does it??? Then are
you certain that the mic is connected to the sound card

and that is what is
being selected during the running of the Wizard. If

anything other than
that, I would expect you to have problems.


Joel

"steve" wrote in

message
...
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end

still
cant hear me? I dont think i'll ever get to the bottom

of
this!

Steve
-----Original Message-----
You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If
you do then the system
is misconfigured. Double click the little
speaker/sound system icon in the
System Tray and then select Options/Properties, and

make
sure the Microphone
is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED

IN
THE RECORD MODE.

Joel


"steve" wrote in
message
...
id rather not run the risk of funy people

contacting me
but if you can think of anything else i'd apprecite

it.
Also i notice that you say in the sound icon to

uncheck
the mic in the playback mode. this does not seem to

do
anything. This just allows your voice to be heard
through
the speakers? I know my mic works as it works

perfectly
through yahoo messenger. this hs been really

bugging me
for some time now and just dont seem to get to the
bottom
of it. I have contacted several people through
messenger
and it is always the same. I can hear them but they
dont
need me. Please dont give up on me yet
Thanks

Steve
-----Original Message-----
Well, if the video goes thru, then I really do not
have
a answer, unless the
other end does not have their system configured
properly. I would send you
my address, but there is too many funny people out
there
and I don't need
the spam. Altho, my ISP catches all spam and

viruses
and stops them at
their server. If you care to risk the spam you can
post
your Messenger
address and we can try that, but of course you may

get
some real funny
people contacting you.

Joel

"steve"

wrote in
message
...
The wizard all seems to be working fine and i get
the
lines from the mic when testing. sound does not
seem to
want to go through to the other end?

Steve
-----Original Message-----
What happens when you run the Audio/Video Tuning
Wizard?

Joel

"steve"
wrote in
message
...
This seems to be such a common fault but when

i
use
the
mic icanhear them but they cannot hear me. Any
suggestions???


.



.



.



.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 12:02 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.