A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Windows XP and video cards, drivers and similar
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cannot see video or hear sound in Capture mode



 
 
Thread Tools Display Modes
  #1  
Old July 30th 06, 08:47 PM posted to microsoft.public.windowsxp.video
Elcamp
external usenet poster
 
Posts: 1
Default Cannot see video or hear sound in Capture mode

I've read through a number of posts and my problem is slightly different. I
have 2 Sony Camcorders, ATI AIW Radeon 8500 DV video card, Windows XP Pro SP2
and 3 capture software programs (Ulead VideoStudio, Sonic MyDVD and Arsoft
DVD2). My problem is as stated in the subject, but the software programs do
control the cameras. When I try to capture video after the computer has been
on for a while, I don't get picture or sound in the capture mode of any of
the programs. As it is the same for all software programs, I have to assume
it is XP.

When I reboot the computer, sometimes, I will then get video and sound in
the capture mode, but if I leave it and go to something else and come back,
the video and sound are no longer there. I have to reboot again and that
dosen't always work. This has started since I installed SP2 and the updates.

I've run 'scandisc' and I downloaded and installed the XPCodecPack. Neither
made any difference.

I would appreciate any help anyone can provide.

Thanks
Ads
  #2  
Old August 1st 06, 08:40 PM posted to microsoft.public.windowsxp.video
Graham Hughes
external usenet poster
 
Posts: 59
Default Cannot see video or hear sound in Capture mode

Have you checked for video card driver updates?

--
Graham Hughes
MVP Digital Media
www.myvideoproblems.co.uk
www.dvds2treasure.com
www.simplydv.com


"Elcamp" wrote in message
news
I've read through a number of posts and my problem is slightly different.
I
have 2 Sony Camcorders, ATI AIW Radeon 8500 DV video card, Windows XP Pro
SP2
and 3 capture software programs (Ulead VideoStudio, Sonic MyDVD and Arsoft
DVD2). My problem is as stated in the subject, but the software programs
do
control the cameras. When I try to capture video after the computer has
been
on for a while, I don't get picture or sound in the capture mode of any of
the programs. As it is the same for all software programs, I have to
assume
it is XP.

When I reboot the computer, sometimes, I will then get video and sound in
the capture mode, but if I leave it and go to something else and come
back,
the video and sound are no longer there. I have to reboot again and that
dosen't always work. This has started since I installed SP2 and the
updates.

I've run 'scandisc' and I downloaded and installed the XPCodecPack.
Neither
made any difference.

I would appreciate any help anyone can provide.

Thanks



  #3  
Old August 2nd 06, 04:01 AM posted to microsoft.public.windowsxp.video
Wojo
external usenet poster
 
Posts: 37
Default Cannot see video or hear sound in Capture mode

As well as updates for the firewire and/or USB?


"Graham Hughes" wrote in message
...
Have you checked for video card driver updates?

--
Graham Hughes
MVP Digital Media
www.myvideoproblems.co.uk
www.dvds2treasure.com
www.simplydv.com


"Elcamp" wrote in message
news
I've read through a number of posts and my problem is slightly different.
I
have 2 Sony Camcorders, ATI AIW Radeon 8500 DV video card, Windows XP Pro
SP2
and 3 capture software programs (Ulead VideoStudio, Sonic MyDVD and
Arsoft
DVD2). My problem is as stated in the subject, but the software programs
do
control the cameras. When I try to capture video after the computer has
been
on for a while, I don't get picture or sound in the capture mode of any
of
the programs. As it is the same for all software programs, I have to
assume
it is XP.

When I reboot the computer, sometimes, I will then get video and sound in
the capture mode, but if I leave it and go to something else and come
back,
the video and sound are no longer there. I have to reboot again and that
dosen't always work. This has started since I installed SP2 and the
updates.

I've run 'scandisc' and I downloaded and installed the XPCodecPack.
Neither
made any difference.

I would appreciate any help anyone can provide.

Thanks





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 02:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.