If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Possible two log-ons for one user?
I boot WinXP Pro with a password. I am the only user and also the
Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. Jorge |
Ads |
#2
|
|||
|
|||
Possible two log-ons for one user?
Jorge Cervantes wrote:
I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#3
|
|||
|
|||
Possible two log-ons for one user?
Jorge Cervantes wrote:
I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#4
|
|||
|
|||
Possible two log-ons for one user?
I did not mention this in order to make the post shorter. I recall this
fact: I installed Total Commander program. I placed its shortcut on the desktop. When I booted later, the icon did not show. I felt like hallucinated. When booted later, I see the icon on the desktop. I will try your suggestion tomorrow . The computer is in my office. Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#5
|
|||
|
|||
Possible two log-ons for one user?
I did not mention this in order to make the post shorter. I recall this
fact: I installed Total Commander program. I placed its shortcut on the desktop. When I booted later, the icon did not show. I felt like hallucinated. When booted later, I see the icon on the desktop. I will try your suggestion tomorrow . The computer is in my office. Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#6
|
|||
|
|||
Possible two log-ons for one user?
BTW, if there are indeed different profiles, how can I delete one profile?
Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#7
|
|||
|
|||
Possible two log-ons for one user?
BTW, if there are indeed different profiles, how can I delete one profile? Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#8
|
|||
|
|||
Possible two log-ons for one user?
I really doubt that this is an issue with the profile itself.
John Jorge Cervantes wrote: I did not mention this in order to make the post shorter. I recall this fact: I installed Total Commander program. I placed its shortcut on the desktop. When I booted later, the icon did not show. I felt like hallucinated. When booted later, I see the icon on the desktop. I will try your suggestion tomorrow . The computer is in my office. Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#9
|
|||
|
|||
Possible two log-ons for one user?
I really doubt that this is an issue with the profile itself.
John Jorge Cervantes wrote: I did not mention this in order to make the post shorter. I recall this fact: I installed Total Commander program. I placed its shortcut on the desktop. When I booted later, the icon did not show. I felt like hallucinated. When booted later, I see the icon on the desktop. I will try your suggestion tomorrow . The computer is in my office. Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#10
|
|||
|
|||
Possible two log-ons for one user?
First you would have to determine why a new profile was created and you
would have to figure out why the system would be alternating between the profiles. What you describe is highly unusual, I kind of doubt that this is a profile issue per se, we will know more after we get the results from the set command. There are only two reasons why new profiles are created for existing users: 1- The user profile is corrupt and the user cannot logon using the corrupt profile so the system creates a new profile for the user. 2- The user lost his permissions on his profile, his read rights to his profile were revoked. Here again the system will create a new profile for the user. John Jorge Cervantes wrote: BTW, if there are indeed different profiles, how can I delete one profile? Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#11
|
|||
|
|||
Possible two log-ons for one user?
First you would have to determine why a new profile was created and you
would have to figure out why the system would be alternating between the profiles. What you describe is highly unusual, I kind of doubt that this is a profile issue per se, we will know more after we get the results from the set command. There are only two reasons why new profiles are created for existing users: 1- The user profile is corrupt and the user cannot logon using the corrupt profile so the system creates a new profile for the user. 2- The user lost his permissions on his profile, his read rights to his profile were revoked. Here again the system will create a new profile for the user. John Jorge Cervantes wrote: BTW, if there are indeed different profiles, how can I delete one profile? Jorge "John John - MVP" wrote in message ... Jorge Cervantes wrote: I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. They would have a different profile folder. To verify this you can use the SET USER command at the Command Prompt. Issue the command under both logons and compare the results. To make it easier to compare the results you can redirect the output of the command to a text file: set user c:\user.txt John |
#12
|
|||
|
|||
Possible two log-ons for one user?
Jorge,
type ("copy and paste") the following into your "Run" box on the Start Menu : c:\windows\system32\lusrmgr.msc .....and press [ok] - This should bring up the "Local Users and Groups" console. From here, you can see all the profiles currently set up on your XP installation. This includes "hidden" accounts. It could be that installing "Total Commander" has configured .Net Framework. When .Net Framework is configured, it causes a new "hidden" profile called "ASPINET" to be created. This has the "knock-on" effect of making a PC with only one profile and no password, that used to boot straight into Windows with no logon, to then begin to stop at the "Welcome" screen. You can override this effect, whether caused in the way described above or in some other way, by downloading and using this tiny Microsoft utility called "AutoLogon" Download "AutoLogon" by clicking on the link below : http://live.sysinternals.com/Autologon.exe == Cheers, Tim Meddick, Peckham, London. :-) "Jorge Cervantes" wrote in message ... I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. Jorge |
#13
|
|||
|
|||
Possible two log-ons for one user?
Jorge, type ("copy and paste") the following into your "Run" box on the Start Menu : c:\windows\system32\lusrmgr.msc .....and press [ok] - This should bring up the "Local Users and Groups" console. From here, you can see all the profiles currently set up on your XP installation. This includes "hidden" accounts. It could be that installing "Total Commander" has configured .Net Framework. When .Net Framework is configured, it causes a new "hidden" profile called "ASPINET" to be created. This has the "knock-on" effect of making a PC with only one profile and no password, that used to boot straight into Windows with no logon, to then begin to stop at the "Welcome" screen. You can override this effect, whether caused in the way described above or in some other way, by downloading and using this tiny Microsoft utility called "AutoLogon" Download "AutoLogon" by clicking on the link below : http://live.sysinternals.com/Autologon.exe == Cheers, Tim Meddick, Peckham, London. :-) "Jorge Cervantes" wrote in message ... I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. Jorge |
#14
|
|||
|
|||
Possible two log-ons for one user?
It's been several years and an SP or two since I actually saw this problem!
Turned out to be some sort of corruption in the user profiles. A "new user" account was the accepted cure. After things worked properly, the old user accounts were removed. Finally the new user account was changed to the desired users name, etc. (I had to skip the gory step by details, since I don't remember them.) "Tim Meddick" wrote in message ... Jorge, type ("copy and paste") the following into your "Run" box on the Start Menu : c:\windows\system32\lusrmgr.msc ....and press [ok] - This should bring up the "Local Users and Groups" console. From here, you can see all the profiles currently set up on your XP installation. This includes "hidden" accounts. It could be that installing "Total Commander" has configured .Net Framework. When .Net Framework is configured, it causes a new "hidden" profile called "ASPINET" to be created. This has the "knock-on" effect of making a PC with only one profile and no password, that used to boot straight into Windows with no logon, to then begin to stop at the "Welcome" screen. You can override this effect, whether caused in the way described above or in some other way, by downloading and using this tiny Microsoft utility called "AutoLogon" Download "AutoLogon" by clicking on the link below : http://live.sysinternals.com/Autologon.exe == Cheers, Tim Meddick, Peckham, London. :-) "Jorge Cervantes" wrote in message ... I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. Jorge |
#15
|
|||
|
|||
Possible two log-ons for one user?
It's been several years and an SP or two since I actually saw this problem! Turned out to be some sort of corruption in the user profiles. A "new user" account was the accepted cure. After things worked properly, the old user accounts were removed. Finally the new user account was changed to the desired users name, etc. (I had to skip the gory step by details, since I don't remember them.) "Tim Meddick" wrote in message ... Jorge, type ("copy and paste") the following into your "Run" box on the Start Menu : c:\windows\system32\lusrmgr.msc ....and press [ok] - This should bring up the "Local Users and Groups" console. From here, you can see all the profiles currently set up on your XP installation. This includes "hidden" accounts. It could be that installing "Total Commander" has configured .Net Framework. When .Net Framework is configured, it causes a new "hidden" profile called "ASPINET" to be created. This has the "knock-on" effect of making a PC with only one profile and no password, that used to boot straight into Windows with no logon, to then begin to stop at the "Welcome" screen. You can override this effect, whether caused in the way described above or in some other way, by downloading and using this tiny Microsoft utility called "AutoLogon" Download "AutoLogon" by clicking on the link below : http://live.sysinternals.com/Autologon.exe == Cheers, Tim Meddick, Peckham, London. :-) "Jorge Cervantes" wrote in message ... I boot WinXP Pro with a password. I am the only user and also the Administrator with the same password. It now looks like that there are two users (i.e., two logons). The reason is that when I log on the windows, I get A screen. When I reboot the computer later, I get B screen. Both A and B screens are very similar but two desktop icons are missing in one of the screens. I am quite puzzled about this observation. My question is how to confirm that there are two users (or logons) for one person, and if so, how to get rid of one of the two logons. Jorge |
Thread Tools | |
Display Modes | |
|
|