If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
So decided to try the Win 10 upgrade from Windows 7, and I received the
Error 0x80004005 message. After that, it reverted me automatically back to Windows 7 again. Searching through the Internet, I got the following solution to it: [Solved] (KB3081424) - Error 0x80004005 in windows 10 update http://www.computing.net/answers/win...update/74.html So it seems to be caused by a specific patch, KB3081424, causing it. The solution to it is listed in this article: Windows 10 patch KB 3081424 can crash, fail to install | InfoWorld http://www.infoworld.com/article/296...o-install.html It mentions going into the registry to fix something. That's all well and good, but how do I apply the fix to this patch under Windows 7, so that it takes effect in Windows 10? Does making a registry change in Windows 7 carry over to Win 10? Yousuf Khan |
Ads |
#2
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
Yousuf Khan wrote on 12/18/2015 7:33 AM:
So decided to try the Win 10 upgrade from Windows 7, and I received the Error 0x80004005 message. After that, it reverted me automatically back to Windows 7 again. Searching through the Internet, I got the following solution to it: [Solved] (KB3081424) - Error 0x80004005 in windows 10 update http://www.computing.net/answers/win...update/74.html So it seems to be caused by a specific patch, KB3081424, causing it. The solution to it is listed in this article: Windows 10 patch KB 3081424 can crash, fail to install | InfoWorld http://www.infoworld.com/article/296...o-install.html It mentions going into the registry to fix something. That's all well and good, but how do I apply the fix to this patch under Windows 7, so that it takes effect in Windows 10? Does making a registry change in Windows 7 carry over to Win 10? Yousuf Khan How did you do the upgrade? I went here https://www.microsoft.com/en-us/soft...load/windows10 and ran the tool and built my bootable USB copy of win 10. Currently (or 2 weeks ago) they were downloading the newer November update of win10 10586 not the July 10240 build. That in itself might make a diff. Either way, once I made the usb, I then re-ran the tool and just told it to upgrade (skip the ISO part). |
#3
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
Big Al wrote:
Yousuf Khan wrote on 12/18/2015 7:33 AM: So decided to try the Win 10 upgrade from Windows 7, and I received the Error 0x80004005 message. After that, it reverted me automatically back to Windows 7 again. Searching through the Internet, I got the following solution to it: [Solved] (KB3081424) - Error 0x80004005 in windows 10 update http://www.computing.net/answers/win...update/74.html So it seems to be caused by a specific patch, KB3081424, causing it. The solution to it is listed in this article: Windows 10 patch KB 3081424 can crash, fail to install | InfoWorld http://www.infoworld.com/article/296...o-install.html It mentions going into the registry to fix something. That's all well and good, but how do I apply the fix to this patch under Windows 7, so that it takes effect in Windows 10? Does making a registry change in Windows 7 carry over to Win 10? Yousuf Khan How did you do the upgrade? I went here https://www.microsoft.com/en-us/soft...load/windows10 and ran the tool and built my bootable USB copy of win 10. Currently (or 2 weeks ago) they were downloading the newer November update of win10 10586 not the July 10240 build. That in itself might make a diff. Either way, once I made the usb, I then re-ran the tool and just told it to upgrade (skip the ISO part). I suspect Yousuf's trying a clean install with one of the Upgrade releases, and that's how he's got into this Catch-22 situation. The answer is, of course, to follow your advice above, and download a proper install version. After that he should run the Upgrade. I have several Upgrades in WinUpdate Hidden, all around 2.8 GB, whereas the $Windows.~WS in C: is 5.78 GB. And yes, if anybody's going to complain that the way he's done it should have worked, and M$ are at fault, I agree. Ed |
#4
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 18/12/2015 9:30 AM, Big Al wrote:
How did you do the upgrade? I went here https://www.microsoft.com/en-us/soft...load/windows10 and ran the tool and built my bootable USB copy of win 10. Currently (or 2 weeks ago) they were downloading the newer November update of win10 10586 not the July 10240 build. That in itself might make a diff. Either way, once I made the usb, I then re-ran the tool and just told it to upgrade (skip the ISO part). Yeah, I initially did it through the Windows Update route, and the problem occurred there. So I didn't feel like waiting for the Windows Update to redownload it all over and over again, so I downloaded the ISO, and ran it through the DVD drive. It occurred through the DVD route too. However, it did ask if I wanted to download the latest patches, maybe I should tell it not to do that? Yousuf Khan |
#5
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
Yousuf Khan wrote on 12/18/2015 12:37 PM:
On 18/12/2015 9:30 AM, Big Al wrote: How did you do the upgrade? I went here https://www.microsoft.com/en-us/soft...load/windows10 and ran the tool and built my bootable USB copy of win 10. Currently (or 2 weeks ago) they were downloading the newer November update of win10 10586 not the July 10240 build. That in itself might make a diff. Either way, once I made the usb, I then re-ran the tool and just told it to upgrade (skip the ISO part). Yeah, I initially did it through the Windows Update route, and the problem occurred there. So I didn't feel like waiting for the Windows Update to redownload it all over and over again, so I downloaded the ISO, and ran it through the DVD drive. It occurred through the DVD route too. However, it did ask if I wanted to download the latest patches, maybe I should tell it not to do that? Yousuf Khan I did it with patches on 2 machines and no ill effects. |
#6
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 18/12/15 12:33, Yousuf Khan wrote:
So decided to try the Win 10 upgrade from Windows 7, and I received the Error 0x80004005 message. After that, it reverted me automatically back to Windows 7 again. It could be because you are so stupid that you are installing it on your 12 years old puter which was barely able to run XP. Now how can you expetc it to run Windows 10? Why don't you buy a new machine from DELL. Any low spec machine from DELL will run Windows 10. |
#7
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
Yousuf Khan wrote:
On 18/12/2015 9:30 AM, Big Al wrote: How did you do the upgrade? I went here https://www.microsoft.com/en-us/soft...load/windows10 and ran the tool and built my bootable USB copy of win 10. Currently (or 2 weeks ago) they were downloading the newer November update of win10 10586 not the July 10240 build. That in itself might make a diff. Either way, once I made the usb, I then re-ran the tool and just told it to upgrade (skip the ISO part). Yeah, I initially did it through the Windows Update route, and the problem occurred there. So I didn't feel like waiting for the Windows Update to redownload it all over and over again, so I downloaded the ISO, and ran it through the DVD drive. It occurred through the DVD route too. However, it did ask if I wanted to download the latest patches, maybe I should tell it not to do that? Yousuf Khan When that happens, you would likely: 1) Examine the setupact.log or CBS.log or whatever. See why it actually failed. The files in question might be in C:\$WINDOWS.~BT. 2) Use CheckSUR (Win7SP1) or DISM (Win8.1) to repair the qualifying OS before next install attempt, in case the Windows Store on the qualifying OS is causing a problem. 3) Now, try to install using the DVD. Version 10586 is equipped to accept the qualifying OS license key directly. So in theory, with 10586, you can do a *clean* install of Windows 10 without going through a Digital Entitlement step, using the key off the COA on the machine. In the case of an OEM computer, like a Dell with 8.1 on it, the DVD should be able to hoover the key out of the BIOS table all by itself. You have many options for escape. And I hope you made a backup before you started... Paul |
#8
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 18/12/2015 12:13 PM, Ed Cryer wrote:
I suspect Yousuf's trying a clean install with one of the Upgrade releases, and that's how he's got into this Catch-22 situation. Nope, just a normal upgrade install. The registry tree branch that they're talking about doesn't even appear in the Windows 7 registry. Yousuf Khan |
#9
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 18/12/2015 3:29 PM, Paul wrote:
When that happens, you would likely: 1) Examine the setupact.log or CBS.log or whatever. See why it actually failed. The files in question might be in C:\$WINDOWS.~BT. 2) Use CheckSUR (Win7SP1) or DISM (Win8.1) to repair the qualifying OS before next install attempt, in case the Windows Store on the qualifying OS is causing a problem. CheckSUR doesn't exist under Win7, but DISM does. 3) Now, try to install using the DVD. Version 10586 is equipped to accept the qualifying OS license key directly. So in theory, with 10586, you can do a *clean* install of Windows 10 without going through a Digital Entitlement step, using the key off the COA on the machine. In the case of an OEM computer, like a Dell with 8.1 on it, the DVD should be able to hoover the key out of the BIOS table all by itself. It doesn't even get to the stage of installing the license key. You have many options for escape. The Windows 10 install escaped all by itself. And I hope you made a backup before you started... Yup, but so far haven't needed it, it escaped back to Win 7 without any modifications. Yousuf Khan |
#10
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
Yousuf Khan wrote:
On 18/12/2015 3:29 PM, Paul wrote: When that happens, you would likely: 1) Examine the setupact.log or CBS.log or whatever. See why it actually failed. The files in question might be in C:\$WINDOWS.~BT. 2) Use CheckSUR (Win7SP1) or DISM (Win8.1) to repair the qualifying OS before next install attempt, in case the Windows Store on the qualifying OS is causing a problem. CheckSUR doesn't exist under Win7, but DISM does. 3) Now, try to install using the DVD. Version 10586 is equipped to accept the qualifying OS license key directly. So in theory, with 10586, you can do a *clean* install of Windows 10 without going through a Digital Entitlement step, using the key off the COA on the machine. In the case of an OEM computer, like a Dell with 8.1 on it, the DVD should be able to hoover the key out of the BIOS table all by itself. It doesn't even get to the stage of installing the license key. You have many options for escape. The Windows 10 install escaped all by itself. And I hope you made a backup before you started... Yup, but so far haven't needed it, it escaped back to Win 7 without any modifications. Yousuf Khan CheckSUR does exist under Windows 7. You *download* a copy. The copy of DISM on Windows 7 is not functionally complete. It does not have the repair functions that exist in Win8 or Win10. That is why we're forced to download and use System Update Readiness at the time of application. You load a fresh copy, as it can be updated with time. Try a link in here. As far as I can remember, it should be several hundred megabytes. I ran it for fun once. https://support.microsoft.com/en-us/kb/947821 Paul |
#11
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 18/12/2015 19:05, Good Guy wrote:
On 18/12/15 12:33, Yousuf Khan wrote: So decided to try the Win 10 upgrade from Windows 7, and I received the Error 0x80004005 message. After that, it reverted me automatically back to Windows 7 again. It could be because you are so stupid that you are installing it on your 12 years old puter which was barely able to run XP. Now how can you expetc it to run Windows 10? Why don't you buy a new machine from DELL. Any low spec machine from DELL will run Windows 10. As an exercise I installed 32bit W10 on an old ACER 2003 Travelmate 4020 laptop just to see if I could. It originally had XP running happily. Anyway it all seems to be working fine, and in fact has just updated itself to the latest Insider Preview version 11082. |
#12
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
En el artículo , Yousuf
Khan escribió: Yup, but so far haven't needed it, it escaped back to Win 7 without any modifications. You should consider that you had a narrow escape and stick with 7. Win10 is a privacy-raping pile of ****. There's no such thing as a free lunch. -- (\_/) (='.'=) Bunny says: Windows 10? Nein danke! (")_(") |
#13
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 19/12/2015 6:08 AM, Mike Tomlinson wrote:
En el artículo , Yousuf Khan escribió: Yup, but so far haven't needed it, it escaped back to Win 7 without any modifications. You should consider that you had a narrow escape and stick with 7. Win10 is a privacy-raping pile of ****. Well, I considered that too, but I want to get setup for DirectX 12 ahead of time, to get ready for it. Yousuf Khan |
#14
|
|||
|
|||
Tried to upgrade to Win 10, got the Error 0x80004005
On 19/12/2015 4:13 AM, Oldster wrote:
As an exercise I installed 32bit W10 on an old ACER 2003 Travelmate 4020 laptop just to see if I could. It originally had XP running happily. Anyway it all seems to be working fine, and in fact has just updated itself to the latest Insider Preview version 11082. It's best not to answer the troll. Yousuf Khan |
Thread Tools | |
Display Modes | Rate This Thread |
|
|