A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Microsoft Messenger
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

no outgoing Audio and Video



 
 
Thread Tools Display Modes
  #1  
Old December 5th 03, 02:34 PM
cumi
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Hello,=20
i have a dell dimension 8300 with the newest chipset 857,
i get the incoming picture and Video, but i can not send a=20
picture or video. I have no firewall or router. can=20
somebody tell me please why it dosen=B4t work.

Thanks for help

Ads
  #2  
Old December 5th 03, 02:34 PM
Jonathan Kay [MVP]
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Greetings,

I don't believe the problem is on your side, most likely since your contact isn't receiving
you, something on their side is blocking it. Tell them to do the following:
Make sure that the Internet Connection Firewall hasn't turned on, click Start, then
click the Control Panel. If you're in category view click Network and Internet connections
then click Network Connections. Right click your network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications, Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway heading) and choose Properties.
Choose the Settings button, click each 'msmsgs' or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message ...
Hello,
i have a dell dimension 8300 with the newest chipset 857,
i get the incoming picture and Video, but i can not send a
picture or video. I have no firewall or router. can
somebody tell me please why it dosenīt work.

Thanks for help


  #3  
Old December 5th 03, 02:34 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Jonathan,
Alot of people have with Intel nic cards have fixed this=20
problem by rolling back the driver. There is a problem=20
with intel nic cards and messenger that really needs to=20
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely=20

since your contact isn't receiving
you, something on their side is blocking it. Tell them=20

to do the following:
Make sure that the Internet Connection Firewall hasn't=20

turned on, click Start, then
click the Control Panel. If you're in category view=20

click Network and Internet connections
then click Network Connections. Right click your=20

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the=20

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the=20

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,=20

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway=20

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'=20

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the=20

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video=20

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message=20

...
Hello,
i have a dell dimension 8300 with the newest chipset 857,
i get the incoming picture and Video, but i can not send=20

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.

  #4  
Old December 5th 03, 02:34 PM
Jonathan Kay [MVP]
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Hi Richard,

The Intel NIC issue that you and others discovered in another thread is not the only cause of
this problem. Realistically, the only way to get that fixed is to complain to Intel --
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message ...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely

since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset 857,
i get the incoming picture and Video, but i can not send

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosenīt work.

Thanks for help


.



  #5  
Old December 5th 03, 02:34 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

WEll the person that discovered the solution to the=20
problem-look back through the threads-said that he did=20
get his driver from windows update. And while it is not=20
the only cause of the problem I must say that every=20
person I have asked who have had the same symptoms-being=20
able to receive but not send audio and video-each one has=20
had an intel nic card. Most of the people complaining=20
aren;t even using firewalls or routers or are, like=20
myself, using a router but only having the problem on the=20
machine with the intel nic card.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in=20

another thread is not the only cause of
this problem. Realistically, the only way to get that=20

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message=20

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely

since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset=20

857,
i get the incoming picture and Video, but i can not send

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.

  #6  
Old December 5th 03, 02:34 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

And I agree that it is not the only problem but so far=20
anyway, for every person complaining about these symptoms=20
who has an intel nic card rolling back the driver has=20
fixed it. =20
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in=20

another thread is not the only cause of
this problem. Realistically, the only way to get that=20

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message=20

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely

since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset=20

857,
i get the incoming picture and Video, but i can not send

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.

  #7  
Old December 5th 03, 02:34 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

And I like the "bad" reference. The fact is that they=20
are not "bad" they are BAD as in when you roll back the=20
driver the program them works. That is the definition of=20
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in=20

another thread is not the only cause of
this problem. Realistically, the only way to get that=20

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message=20

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely

since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset=20

857,
i get the incoming picture and Video, but i can not send

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.

  #8  
Old December 5th 03, 02:35 PM
John Holmes [MSFT]
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

If you can tell me the versions of the driver in question, as well as the
model of the card, I can have one of ours testers try to reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send e-mail directly to this alias. This alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most likely

since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet Gateway

heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not send

a
picture or video. I have no firewall or router. can
somebody tell me please why it dosenīt work.

Thanks for help


.



.



  #9  
Old December 5th 03, 02:35 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

My motherboard is a D865 perl with an Intel Pro/1000 CT=20
on the board. It is using the latest available drivers=20
downloaded from intel's support website. I cannot roll=20
the driver back to a previous version cause windows says=20
no previous version exists for me. The machine is brand=20
new and I don't have a previous driver to roll it back=20
to. If you go back through these threads the last couple=20
days other people named their boards and nic cards as=20
well (all intel and all having the same problem). Those=20
people were able to correct it by rolling back the=20
driver. The problem we are all having is that we can=20
connect but the other side receives no voice or video. =20
In my case I am using a Upnp enabled router and two non-
intel boards on my network can communicate with voice and=20
video with each other behind the router and to anyone=20
else outside the router so I know it has nothing to do=20
with my firewall/router as it is working properly for the=20
other two machines. =20

Thanks
-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try to=20

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and=20

confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

  #10  
Old December 5th 03, 02:35 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

It is intel driver version 7.0.36.0 dated March 11, 2003=20
for intel Pro/100 and Pro/1000 nic cards.
-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try to=20

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and=20

confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

  #11  
Old December 5th 03, 02:35 PM
James
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

I posted this in an older thread.

I just disabled my onboard Intel NIC and installed a=20
RealTek. I now have audio/video. Intel better fix=20
this! I was unable to roll back the drivers since the=20
original drivers that came with the board didn't work in=20
the first place and updating them to the ones they were=20
on the net didn't fix the problem either. So rolling=20
back the drivers was not an option for me.

But it's working now with this NIC. I'll be watching=20
Intel's web site to see if they update their drivers=20
anytime soon. I better not hold my breath.

My motherboard: D875PBZ (onboard lan Intel Pro/1000 CT)


-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try to=20

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and=20

confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

  #12  
Old December 5th 03, 02:35 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Thanks James
-----Original Message-----
I posted this in an older thread.

I just disabled my onboard Intel NIC and installed a=20
RealTek. I now have audio/video. Intel better fix=20
this! I was unable to roll back the drivers since the=20
original drivers that came with the board didn't work in=20
the first place and updating them to the ones they were=20
on the net didn't fix the problem either. So rolling=20
back the drivers was not an option for me.

But it's working now with this NIC. I'll be watching=20
Intel's web site to see if they update their drivers=20
anytime soon. I better not hold my breath.

My motherboard: D875PBZ (onboard lan Intel Pro/1000 CT)


-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try=20

to=20
reproduce this. If
it is causing an issue, we can work with Intel to fix=20

it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties,=20

and=20
confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition=20

of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed=20

this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell=20

them
to do the following:
Make sure that the Internet Connection Firewall hasn't
turned on, click Start, then
click the Control Panel. If you're in category view
click Network and Internet connections
then click Network Connections. Right click your
network/internet connection, then click
Properties. Click the Advanced Tab, and verify that=20

the
Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the
current port forwardings -- to do so,
click Start, All Programs, Accessories,=20

Communications,
Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'
or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the
Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the=20

Audio/Video
Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message
.. .
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

.

  #13  
Old December 5th 03, 02:36 PM
cumi
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

Dear Mr. Holmes,=20
i have tried a lot of solution, and i think that it is=20
the nic card, here is the card Intel pro 10/100VE and the=20
driver is 7.06.26.0, if you can fix the problem, could=20
you please contact me or post it in the newsgroup


-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try to=20

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and=20

confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

  #14  
Old December 5th 03, 02:37 PM
richard
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

I appears that everyone I have found so far having the=20
problem has 845-875 chipsets with intel pro/100 and=20
pro/1000 nic cards built onto the boards. People have=20
replaced the boards and disabled the onboard nic card or=20
rolled back the driver and restored audio and video.
-----Original Message-----
If you can tell me the versions of the driver in=20

question, as well as the
model of the card, I can have one of ours testers try to=20

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--=20
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and=20

confers no rights.
Please do not send e-mail directly to this alias. This=20

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --=20
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most=20

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet=20

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning=20

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not=20

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosen=B4t work.

Thanks for help


.



.



.

  #15  
Old December 5th 03, 02:37 PM
Lucky One
external usenet poster
 
Posts: n/a
Default no outgoing Audio and Video

i hav intel D845pebt2 mouther board, intel pro 10/100VE on board using
driver 6.4.14.0 date 9/25/2002 no probiem here


"richard" wrote in message
...
I appears that everyone I have found so far having the
problem has 845-875 chipsets with intel pro/100 and
pro/1000 nic cards built onto the boards. People have
replaced the boards and disabled the onboard nic card or
rolled back the driver and restored audio and video.
-----Original Message-----
If you can tell me the versions of the driver in

question, as well as the
model of the card, I can have one of ours testers try to

reproduce this. If
it is causing an issue, we can work with Intel to fix it.

--
John Holmes
Developer, MSN Messenger

This posting is provided "AS IS" with no warranties, and

confers no rights.
Please do not send e-mail directly to this alias. This

alias is for
newsgroup purposes only.


"richard" wrote in message
...
And I like the "bad" reference. The fact is that they
are not "bad" they are BAD as in when you roll back the
driver the program them works. That is the definition of
BAD.
-----Original Message-----
Hi Richard,

The Intel NIC issue that you and others discovered in

another thread is not the only cause of
this problem. Realistically, the only way to get that

fixed is to complain to Intel --
unless these "bad" drivers are on WindowsUpdate...
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com

"richard" wrote in message

...
Jonathan,
Alot of people have with Intel nic cards have fixed this
problem by rolling back the driver. There is a problem
with intel nic cards and messenger that really needs to
be addressed.
-----Original Message-----
Greetings,

I don't believe the problem is on your side, most

likely
since your contact isn't receiving
you, something on their side is blocking it. Tell them

to do the following:
Make sure that the Internet Connection Firewall hasn't

turned on, click Start, then
click the Control Panel. If you're in category view

click Network and Internet connections
then click Network Connections. Right click your

network/internet connection, then click
Properties. Click the Advanced Tab, and verify that the

Internet Connection Firewall is
unchecked.
If you're using a router (UPnP enabled), remove the

current port forwardings -- to do so,
click Start, All Programs, Accessories, Communications,

Network Connections. Right-click the
"Internet Gateway" (should be under the Internet

Gateway
heading) and choose Properties.
Choose the Settings button, click each 'msmsgs'

or 'msnmsgr' entry and then choose 'Delete'
to each one. Then close Messenger (right-click the

Messenger icon, choose Exit), then restart
Messenger and try a voice/video conversation again.

Finally, both of you should run through the Audio/Video

Tuning Wizard (click the Tools menu
in the main Messenger window, then Audio Tuning

Wizard).
____________________________________________
Jonathan Kay
Windows MVP, Messenger
Associate Expert
http://www.microsoft.com/windowsxp/expertzone/
Messenger Resources - http://messenger.jonathankay.com




"cumi" wrote in message

...
Hello,
i have a dell dimension 8300 with the newest chipset

857,
i get the incoming picture and Video, but i can not

send
a
picture or video. I have no firewall or router. can
somebody tell me please why it dosenīt work.

Thanks for help


.



.



.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 01:17 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright Đ2004-2024 PCbanter.
The comments are property of their posters.