If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
I am running XP Media Center 2005. I just purchased the Microsoft Wireless
Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
Ads |
#2
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
#3
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
I put the mouse on its back and it still won't work. I also tried placing it
on different types of surfaces but that didn't work either. Any other suggestions, or do you think I should return the mouse? "crime prevention" wrote: try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
#4
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
can you start the screensaver manually, preview
-- "Jay" wrote in message ... I put the mouse on its back and it still won't work. I also tried placing it on different types of surfaces but that didn't work either. Any other suggestions, or do you think I should return the mouse? "crime prevention" wrote: try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
#5
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
Yes, it will let me start the screen saver manually, in preview mode (with
the wireless receiver plugged in to the usb port). I also tried taking the battery out of the mouse with the wireless receiver plugged into the USB port and the screensaver wouldn't come on then either. The screensaver will work with a regular mouse plugged into it (a usb mouse with a cord). "crime prevention" wrote: can you start the screensaver manually, preview -- "Jay" wrote in message ... I put the mouse on its back and it still won't work. I also tried placing it on different types of surfaces but that didn't work either. Any other suggestions, or do you think I should return the mouse? "crime prevention" wrote: try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
#6
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
does your mouse software have something like a "disable screensaver" option
or something Jay wrote: Yes, it will let me start the screen saver manually, in preview mode (with the wireless receiver plugged in to the usb port). I also tried taking the battery out of the mouse with the wireless receiver plugged into the USB port and the screensaver wouldn't come on then either. The screensaver will work with a regular mouse plugged into it (a usb mouse with a cord). "crime prevention" wrote: can you start the screensaver manually, preview -- "Jay" wrote in message ... I put the mouse on its back and it still won't work. I also tried placing it on different types of surfaces but that didn't work either. Any other suggestions, or do you think I should return the mouse? "crime prevention" wrote: try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? -- |
#7
|
|||
|
|||
Wireless Notebook Laser Mouse 6000
The screen saver does not work when you use a Wireless Optical Desktop
mouse on a Windows XP SP2-based computer http://support.microsoft.com/kb/911895/en-us Jay wrote: Yes, it will let me start the screen saver manually, in preview mode (with the wireless receiver plugged in to the usb port). I also tried taking the battery out of the mouse with the wireless receiver plugged into the USB port and the screensaver wouldn't come on then either. The screensaver will work with a regular mouse plugged into it (a usb mouse with a cord). "crime prevention" wrote: can you start the screensaver manually, preview -- "Jay" wrote in message ... I put the mouse on its back and it still won't work. I also tried placing it on different types of surfaces but that didn't work either. Any other suggestions, or do you think I should return the mouse? "crime prevention" wrote: try putting the mouse on its back to see if the surface its on makes the mouse think its moving slightly when its the right way up -- "Jay" wrote in message ... I am running XP Media Center 2005. I just purchased the Microsoft Wireless Notebook Laser Mouse 6000 and installed the related software, IntelliPoint 5.5. When the wireless mouse reciever is plugged into the USB port my screensaver won't work. The screensaver will work with the software installed. There's only a problem when I plug in the wireless receiver. Any suggestions as to how to make this mouse work with my system? |
Thread Tools | |
Display Modes | |
|
|