A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Can't access USB flash drive



 
 
Thread Tools Display Modes
  #1  
Old September 12th 06, 01:57 PM posted to microsoft.public.windowsxp.hardware
Simon
external usenet poster
 
Posts: 14
Default Can't access USB flash drive

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?

Ads
  #2  
Old September 12th 06, 03:15 PM posted to microsoft.public.windowsxp.hardware
Jack
external usenet poster
 
Posts: 181
Default Can't access USB flash drive

Does the flash drive appear in the device manager?

"Simon" wrote:

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?


  #3  
Old September 12th 06, 04:57 PM posted to microsoft.public.windowsxp.hardware
Simon
external usenet poster
 
Posts: 14
Default Can't access USB flash drive

Yes it does. Currently I have two sticks plugged in. Device Manager
recognises them both and shows the same properties for each one, but
only one shows up in My Computer...

Jack wrote:

Does the flash drive appear in the device manager?

"Simon" wrote:

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?



  #4  
Old September 12th 06, 09:24 PM posted to microsoft.public.windowsxp.hardware
usasma
external usenet poster
 
Posts: 204
Default Can't access USB flash drive

It could be that there is a mapped/network drive that has the same drive
letter as the USB drive. Check in Disk Management and change the drive
letter(s) if need be.

- John

"Simon" wrote:

Yes it does. Currently I have two sticks plugged in. Device Manager
recognises them both and shows the same properties for each one, but
only one shows up in My Computer...

Jack wrote:

Does the flash drive appear in the device manager?

"Simon" wrote:

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?




  #5  
Old September 13th 06, 01:27 PM posted to microsoft.public.windowsxp.hardware
Simon
external usenet poster
 
Posts: 14
Default Can't access USB flash drive

I think I'm getting to the bottom of it. At work, we all have a network
drive mapped to G: (can't change this). I also happen to have two DVD
drives (D & E). For some reason, this one particular flash drive always
wants to be G:, so it can't appear on my work machine unless I
disconnect the G: network drive. Any other flash stick just takes the
next available letter (F). I don't have permissions to change the disk
management at work. When I plug it in a home, would there be some
setting for the stick that makes it always connect to G:? So, is it
possible to configure that particular drive to choose the next
available letter?
It sounds like the sort of thing that should be a OS setting rather
than a device specific setting, but the problem only ever occurs with
this stick...

usasma wrote:

It could be that there is a mapped/network drive that has the same drive
letter as the USB drive. Check in Disk Management and change the drive
letter(s) if need be.

- John

"Simon" wrote:

Yes it does. Currently I have two sticks plugged in. Device Manager
recognises them both and shows the same properties for each one, but
only one shows up in My Computer...

Jack wrote:

Does the flash drive appear in the device manager?

"Simon" wrote:

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?





  #6  
Old September 13th 06, 05:56 PM posted to microsoft.public.windowsxp.hardware
Uwe Sieber
external usenet poster
 
Posts: 609
Default Can't access USB flash drive


You admin could use my tool ReMount to change drive letter
remotely by execute it by means of Sysinternals PsExec:
http://www.sysinternals.com/Utilities/PsExec.html
http://www.uwe-sieber.de/files/remount.zip

Or he installs my USB drive letter manager to ensure
that no one bothers him again about drive letters.
http://www.uwe-sieber.de/usbdlm_e.html


If this is all no option then you can change the letter
by a dirty trick...
Windows saves drive letter assingment once made. But it can
save exactely on assingment per drive and per letter.
When a drive is not connected then its assingment can be
superseeded by the 'first availlable letter' rule. And this
is what you can use:

Attache the first drive. Then borrow anothter drive and
attach it too. It will get letter G because it's the first
availlable in view of the mount manager. Then attach your
second drive (use an USB port at the back side if you have
only two in front). Your second drive gets the first availlable
letter now (maybe H and Windows will save this. And as
long as you never attach three drives at the same time again,
it sould stay at H:.


Greetings from Germany

Uwe





Simon wrote:
I think I'm getting to the bottom of it. At work, we all have a network
drive mapped to G: (can't change this). I also happen to have two DVD
drives (D & E). For some reason, this one particular flash drive always
wants to be G:, so it can't appear on my work machine unless I
disconnect the G: network drive. Any other flash stick just takes the
next available letter (F). I don't have permissions to change the disk
management at work. When I plug it in a home, would there be some
setting for the stick that makes it always connect to G:? So, is it
possible to configure that particular drive to choose the next
available letter?
It sounds like the sort of thing that should be a OS setting rather
than a device specific setting, but the problem only ever occurs with
this stick...

usasma wrote:

It could be that there is a mapped/network drive that has the same drive
letter as the USB drive. Check in Disk Management and change the drive
letter(s) if need be.

- John

"Simon" wrote:

Yes it does. Currently I have two sticks plugged in. Device Manager
recognises them both and shows the same properties for each one, but
only one shows up in My Computer...

Jack wrote:

Does the flash drive appear in the device manager?

"Simon" wrote:

I've got an odd problem with a flash drive (USB stick). On my home
machine, Windows XP Pro recognizes it as soon as I plug it in and I can
read and write with it. However, I don't get the little icon that says
'Safely remove Hardware'...

When I plug the stick into my work machine (also XP Pro) doesn't give
me a 'Removeable Drive' disk in My Computer. I now get the 'Safely
Remove hardware' icon and I can see the device in Device manager. I can
plug this disk into all the other machines in the office and it is
accessable instantly. My work machine can also access any other flash
stick. It just seems to be this particular stick in this particular
machine.

Any clues?




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 06:01 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.