A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

some DVDs "hiccup"



 
 
Thread Tools Display Modes
  #1  
Old August 2nd 11, 07:08 AM posted to microsoft.public.windowsxp.hardware
Jo-Anne[_4_]
external usenet poster
 
Posts: 1,101
Default some DVDs "hiccup"

One more DVD problem: Recently, I bought a bunch of brand-new DVDs of a TV
series and have been playing them on my laptop (a 2008 Dell running WinXP,
using VLC Media Player) to make sure they're OK. Most of them are, but a few
have been hiccuping--that is, both the audio and the video stop for a moment
and then continue on. Sometimes, if I remove the DVD from the drive and put
it back in, I can play through the formerly bad spot--but not always. One
DVD in particular has been hiccuping a lot.

Is this likely to be a problem with the DVD itself or with my computer's
hardware or software? I have no other device on which to test the DVDs.

Thank you!

Jo-Anne



Ads
  #2  
Old August 2nd 11, 07:47 AM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default some DVDs "hiccup"

Jo-Anne wrote:
One more DVD problem: Recently, I bought a bunch of brand-new DVDs of a TV
series and have been playing them on my laptop (a 2008 Dell running WinXP,
using VLC Media Player) to make sure they're OK. Most of them are, but a few
have been hiccuping--that is, both the audio and the video stop for a moment
and then continue on. Sometimes, if I remove the DVD from the drive and put
it back in, I can play through the formerly bad spot--but not always. One
DVD in particular has been hiccuping a lot.

Is this likely to be a problem with the DVD itself or with my computer's
hardware or software? I have no other device on which to test the DVDs.

Thank you!

Jo-Anne


Have you ever tried this program ? It has a couple
tests you can try.

ftp://ftp6.nero.com/tools/DiscSpeed.zip

I use an earlier version of that program.

This is a quality check of my Kaspersky AV disc, which
only has 200MB of data on the disc. The scan as a result,
only occupies a portion of the disc surface. This scan
is pretty good, as the error rate is in the 10's rather
than the 1000's.

http://img32.imageshack.us/img32/4200/scanresult.gif

Drives (and test software), vary in what error parameters
they can measure and report. Some people keep specific models
of burners around, for their known measurement capabilities.
You'll notice my drive is only measuring C1 in that example.
I'm just happy it measures *something*. I used to have
a Liteon, and it had a few more options.

To measure a disc, you want a "raw" error measurement. The
thing is, even when you see thousands of errors in the scan,
the Reed Solomon error code corrects all of them. Eventually,
the drive has trouble tracking the groove on the disc, and
that leads to the drive becoming virtually unresponsive.

http://en.wikipedia.org/wiki/Reed_Solomon

"The result is a CIRC that can completely correct error
bursts up to 4000 bits, or about 2.5 mm on the disc surface.
This code is so strong that most CD playback errors are almost
certainly caused by tracking errors that cause the laser to
jump track, not by uncorrectable error bursts."

They use a powerful error correcting code, to compensate for
the abuse the discs are subjected to.

*******

If you don't want to try that, you can also attempt
to copy the large files held in the video_ts folder,
over to your hard drive, then try and play the
content from there. At least, that works for
the home made DVDs I have here (I used DVD authoring
software to convert captured content from my WinTV
capture card, into discs). A file copied off there,
can be played from the hard drive.

If you're copying the entire contents of a dual layer
commercial disc, the player may takes its sweet time
doing the transfer. Without tricks, it'll run at 1x
read rate (as far as I know, this is called "rip-lock"
and is hated). If I switch over to booting up Linux, and
copy the same disc from there, it copies at the max media
rate (which doesn't happen to be much faster, but does
shave at least an hour off the transfer time).

Good luck,
Paul
  #3  
Old August 3rd 11, 12:09 AM posted to microsoft.public.windowsxp.hardware
Jo-Anne[_4_]
external usenet poster
 
Posts: 1,101
Default some DVDs "hiccup"

"Paul" wrote in message
...
Jo-Anne wrote:
One more DVD problem: Recently, I bought a bunch of brand-new DVDs of a
TV series and have been playing them on my laptop (a 2008 Dell running
WinXP, using VLC Media Player) to make sure they're OK. Most of them are,
but a few have been hiccuping--that is, both the audio and the video stop
for a moment and then continue on. Sometimes, if I remove the DVD from
the drive and put it back in, I can play through the formerly bad
spot--but not always. One DVD in particular has been hiccuping a lot.

Is this likely to be a problem with the DVD itself or with my computer's
hardware or software? I have no other device on which to test the DVDs.

Thank you!

Jo-Anne


Have you ever tried this program ? It has a couple
tests you can try.

ftp://ftp6.nero.com/tools/DiscSpeed.zip

I use an earlier version of that program.

This is a quality check of my Kaspersky AV disc, which
only has 200MB of data on the disc. The scan as a result,
only occupies a portion of the disc surface. This scan
is pretty good, as the error rate is in the 10's rather
than the 1000's.

http://img32.imageshack.us/img32/4200/scanresult.gif

Drives (and test software), vary in what error parameters
they can measure and report. Some people keep specific models
of burners around, for their known measurement capabilities.
You'll notice my drive is only measuring C1 in that example.
I'm just happy it measures *something*. I used to have
a Liteon, and it had a few more options.

To measure a disc, you want a "raw" error measurement. The
thing is, even when you see thousands of errors in the scan,
the Reed Solomon error code corrects all of them. Eventually,
the drive has trouble tracking the groove on the disc, and
that leads to the drive becoming virtually unresponsive.

http://en.wikipedia.org/wiki/Reed_Solomon

"The result is a CIRC that can completely correct error
bursts up to 4000 bits, or about 2.5 mm on the disc surface.
This code is so strong that most CD playback errors are almost
certainly caused by tracking errors that cause the laser to
jump track, not by uncorrectable error bursts."

They use a powerful error correcting code, to compensate for
the abuse the discs are subjected to.

*******

If you don't want to try that, you can also attempt
to copy the large files held in the video_ts folder,
over to your hard drive, then try and play the
content from there. At least, that works for
the home made DVDs I have here (I used DVD authoring
software to convert captured content from my WinTV
capture card, into discs). A file copied off there,
can be played from the hard drive.

If you're copying the entire contents of a dual layer
commercial disc, the player may takes its sweet time
doing the transfer. Without tricks, it'll run at 1x
read rate (as far as I know, this is called "rip-lock"
and is hated). If I switch over to booting up Linux, and
copy the same disc from there, it copies at the max media
rate (which doesn't happen to be much faster, but does
shave at least an hour off the transfer time).

Good luck,
Paul



Thank you for all the info, Paul! I'm overwhelmed--and not sure where to
start. If I can copy one DVD to my hard drive, I'll try that first.

Jo-Anne


  #4  
Old August 3rd 11, 04:18 AM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default some DVDs "hiccup"

Jo-Anne wrote:



Thank you for all the info, Paul! I'm overwhelmed--and not sure where to
start. If I can copy one DVD to my hard drive, I'll try that first.

Jo-Anne


Even if you remember that program for some future time, it
can help you tell the difference between "good" blank media
and "bad" blank media. When I get a spindle of media, for the
first burn, I have a look at the scan, to see how well it was burned.
If you see a high error rate, that is warning you that the
burned discs might not last very long.

Commercial media should be pressed, rather than burned. And they
have some tricks for some of the media, to make it harder for the
media to play in computers. The media itself might be perfectly
good (low error rate), but due to the design of the disc, the
*interpretation* of what is written on there, causes it to play
poorly or not at all on a computer.

So if you want yet another test to try, pop your new (recalcitrant)
movie into a standalone DVD player, and see if it plays smoothly there.
If it is smooth there, and jumpy or refuses to play in the computer,
then you'd get out Google and Google the movie title or other info
on the disc. Lots has been written about some of the titles that
have their share of dirty tricks, and a Google search will help
warn you what to expect.

Lots of movie titles, don't have tricks. But some are famed,
as "poster children", for their particular flavor of trick.
I'm sure anyone who collects movies, keeps that trash in
a separate section of their library rack.

Paul
  #5  
Old August 3rd 11, 06:06 AM posted to microsoft.public.windowsxp.hardware
Jo-Anne[_4_]
external usenet poster
 
Posts: 1,101
Default some DVDs "hiccup"

"Paul" wrote in message
...
Jo-Anne wrote:



Thank you for all the info, Paul! I'm overwhelmed--and not sure where to
start. If I can copy one DVD to my hard drive, I'll try that first.

Jo-Anne


Even if you remember that program for some future time, it
can help you tell the difference between "good" blank media
and "bad" blank media. When I get a spindle of media, for the
first burn, I have a look at the scan, to see how well it was burned.
If you see a high error rate, that is warning you that the
burned discs might not last very long.

Commercial media should be pressed, rather than burned. And they
have some tricks for some of the media, to make it harder for the
media to play in computers. The media itself might be perfectly
good (low error rate), but due to the design of the disc, the
*interpretation* of what is written on there, causes it to play
poorly or not at all on a computer.

So if you want yet another test to try, pop your new (recalcitrant)
movie into a standalone DVD player, and see if it plays smoothly there.
If it is smooth there, and jumpy or refuses to play in the computer,
then you'd get out Google and Google the movie title or other info
on the disc. Lots has been written about some of the titles that
have their share of dirty tricks, and a Google search will help
warn you what to expect.

Lots of movie titles, don't have tricks. But some are famed,
as "poster children", for their particular flavor of trick.
I'm sure anyone who collects movies, keeps that trash in
a separate section of their library rack.

Paul



Thank you again, Paul! I've saved your posts on my hard drive for future
reference. I decided this time to return the DVD set to the seller. Discs 1
and 3 played fine; only disc 2 skipped--and it did it a lot. (I did Google
the title but didn't find anything about errors.) I don't have a standalone
DVD player or a TV, so my computer is my only way to play DVDs right now.

Jo-Anne


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 11:34 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.