A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » General XP issues or comments
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Blue Screen Error - Setup: 0x0000007B (0xF894D640, 0xC0000034)



 
 
Thread Tools Display Modes
  #1  
Old March 25th 03, 11:10 PM
Rick \Nutcase\ Rogers
external usenet poster
 
Posts: n/a
Default Blue Screen Error - Setup: 0x0000007B (0xF894D640, 0xC0000034)

Hi David,

Well, I suppose the lack of any boot.ini could cause the error as well =
(this file tells the bootloader where to look for the OS). Normally it =
is attributed to a bad arc path. My best *guess* at this point would be =
to have you rebuild the boot.ini file using bootcfg /rebuild from a =
command prompt while booting the CD.

--=20
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x - =
http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone - =
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org

"David De Trolio" wrote in message =
...
Hi Rick...I checked again...I do have show all files selected, scanned =

the
entire drive, no boot.ini file found.
=20
Thanks....Dave
=20
"Rick "Nutcase" Rogers" wrote in message
...
Hi David,
=20
It is a hidden system file on the root of the boot partition.
=20
--
Best of Luck,
=20
Rick Rogers aka "Nutcase" MS-MVP - Win9x - =

http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone -
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org
=20
"David De Trolio" wrote in message
...
Rick...I searched my Win2K drive, no boot.ini file found.


"Rick "Nutcase" Rogers" wrote in message
...
Hi,

The stop error usually indicates a problem with boot.ini, you might =

want
to
try editing it from a command prompt to make sure the path is =

correct.

--
Best of Luck,

Rick Rogers aka "Nutcase" MS-MVP - Win9x -

http://mvp.support.microsoft.com/
Associate Expert - WinXP - Expert Zone -
www.microsoft.com/windowsxp/expertzone
Win98 Help - www.rickrogers.org

"David De Trolio" wrote in message
...
Hi everyone:

I received the above error six times when trying to upgrade my

Windows
2000 Professional SP3 WD 60GB drive to Windows XP Professional. I =

tried
the
upgrade running it from within Windows 2000 Professional, then =

tried it
using the CD-Rom boot function. Any time I tried an upgrade it =

failed.

During the upgrade process, twice I saw Windows say it could =

not
load
device drivers for "System" and showed an icon of a desktop PC and

monitor.

The odd thing about this is when I blanked the drive (I had a =

full
Norton Ghost image of my Win2KSP3) and installed Windows XP =

Professional
as
a new install, the process worked fine. Windows XP Professional =

was
running
clean on my desktop.

Any ideas on what could be holding me up? I ran the =

configurator
from
Microsoft, removed any programs or modules or printers which would =

be a
problem, but still could not upgrade this drive.

It is a Intel P3 running at 667Mhz/133 with 513MB ram and 60GB =

hard
disk.

Thanks...Dave




=20

Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 12:33 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 PCbanter.
The comments are property of their posters.