![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
About six weeks ago (November 13), I bought a new computer.
The OS is Windows XP Home Edition SP3 The MB is an Intel Corporation DG35EC AAE29266-205. The BIOS is Intel Corp. ECG3510M.86A.0107.2008.0826.1637 08/26/2008 About ten days ago, when restoring the computer from hibernation, an error message appeared: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" This is now continuing. When I Google the above line, thousands of sites appear that have questions about that message, but none (that I can see) have any answers (well, I did not check all the thousands of sites, but several that looked promising). I'm reasoning that, because this message appears before the machine boots up, it does not have anything to do with installed programs. Just the same, I did restore to the earliest point I have (about three weeks ago). I seem to have the latest BIOS update, and anyway, I'm not fussy on flashing the BIOS unless I feel with cty that it will do some good. Any suggestions would be appreciated. If I have omitted any significant info, please ask. May the new year 2009 see you enjoying health and happiness! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
Ads |
#2
|
|||
|
|||
![]()
johnn wrote:
About six weeks ago (November 13), I bought a new computer. The OS is Windows XP Home Edition SP3 The MB is an Intel Corporation DG35EC AAE29266-205. The BIOS is Intel Corp. ECG3510M.86A.0107.2008.0826.1637 08/26/2008 About ten days ago, when restoring the computer from hibernation, an error message appeared: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" This is now continuing. When I Google the above line, thousands of sites appear that have questions about that message, but none (that I can see) have any answers (well, I did not check all the thousands of sites, but several that looked promising). I'm reasoning that, because this message appears before the machine boots up, it does not have anything to do with installed programs. Just the same, I did restore to the earliest point I have (about three weeks ago). I seem to have the latest BIOS update, and anyway, I'm not fussy on flashing the BIOS unless I feel with cty that it will do some good. New computer + hardware problems = exercise your warranty and call their tech support. The hard drive is probably going. You can test it yourself, but since the machine is still under warranty I'd just have the computer mft. fix it. Don't let them try to get you to reinstall Windows since this will not help with failing hardware. http://www.elephantboycomputers.com/...ardware_Tshoot Malke -- MS-MVP Elephant Boy Computers - Don't Panic! FAQ - http://www.elephantboycomputers.com/#FAQ |
#3
|
|||
|
|||
![]()
Carefully think about the error you recieved...A disk read error is just
that, error in the ability for the hd to read the data on the disk....Youre problem(s) are in the hd,to repair,get more info,boot to xp cd,at xp cd boot menu press r for recovery console,select 1 for C: press enter for password,type:CHKDSK C: write down info,type:CHKDSK C: /R once its thru,type:EXIT let xp start,remove cd.Or,get the hd MS-DOS check utility from the hd mfg web site,download & install to a MS-DOS formatted floppy,boot pc to floppy,run the tests.Or/and give the CHKDSK C: /R some time,it may have resolved the problem. "johnn" wrote: About six weeks ago (November 13), I bought a new computer. The OS is Windows XP Home Edition SP3 The MB is an Intel Corporation DG35EC AAE29266-205. The BIOS is Intel Corp. ECG3510M.86A.0107.2008.0826.1637 08/26/2008 About ten days ago, when restoring the computer from hibernation, an error message appeared: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" This is now continuing. When I Google the above line, thousands of sites appear that have questions about that message, but none (that I can see) have any answers (well, I did not check all the thousands of sites, but several that looked promising). I'm reasoning that, because this message appears before the machine boots up, it does not have anything to do with installed programs. Just the same, I did restore to the earliest point I have (about three weeks ago). I seem to have the latest BIOS update, and anyway, I'm not fussy on flashing the BIOS unless I feel with cty that it will do some good. Any suggestions would be appreciated. If I have omitted any significant info, please ask. May the new year 2009 see you enjoying health and happiness! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#4
|
|||
|
|||
![]()
It appears you are getting an error reading the hibernation file. This is
the file (the image of memory contents) written on the disk when the computer hibernates. When bringing out of hibernation the computer does not 'boot up' but merely reloads memory from the hibernation file. To recover from this type of problem you must reboot. To do this repeatedly tap F8 after pressing power on and select to boot. Hopefully it was only a temporary error. "johnn" wrote in message ... About six weeks ago (November 13), I bought a new computer. The OS is Windows XP Home Edition SP3 The MB is an Intel Corporation DG35EC AAE29266-205. The BIOS is Intel Corp. ECG3510M.86A.0107.2008.0826.1637 08/26/2008 About ten days ago, when restoring the computer from hibernation, an error message appeared: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" This is now continuing. When I Google the above line, thousands of sites appear that have questions about that message, but none (that I can see) have any answers (well, I did not check all the thousands of sites, but several that looked promising). I'm reasoning that, because this message appears before the machine boots up, it does not have anything to do with installed programs. Just the same, I did restore to the earliest point I have (about three weeks ago). I seem to have the latest BIOS update, and anyway, I'm not fussy on flashing the BIOS unless I feel with cty that it will do some good. Any suggestions would be appreciated. If I have omitted any significant info, please ask. May the new year 2009 see you enjoying health and happiness! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#5
|
|||
|
|||
![]()
John
Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? Try HD Tune only gives information and does not fix any problems. Download and run it and see what it turns up. You want HD Tune (freeware) version 2.55 not HD Tune Pro (not Freeware) version 3.00. http://www.hdtune.com/ Select the Info tabs and place the cursor on the drive under Drive letter and then double click the two page icon ( copy to Clipboard ) and copy into a further message. Select the Health tab and then double click the two page icon ( copy to Clipboard ) and copy into a further message. Make sure you do a full surface scan with HD Tune. -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ johnn wrote: About six weeks ago (November 13), I bought a new computer. The OS is Windows XP Home Edition SP3 The MB is an Intel Corporation DG35EC AAE29266-205. The BIOS is Intel Corp. ECG3510M.86A.0107.2008.0826.1637 08/26/2008 About ten days ago, when restoring the computer from hibernation, an error message appeared: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" This is now continuing. When I Google the above line, thousands of sites appear that have questions about that message, but none (that I can see) have any answers (well, I did not check all the thousands of sites, but several that looked promising). I'm reasoning that, because this message appears before the machine boots up, it does not have anything to do with installed programs. Just the same, I did restore to the earliest point I have (about three weeks ago). I seem to have the latest BIOS update, and anyway, I'm not fussy on flashing the BIOS unless I feel with cty that it will do some good. Any suggestions would be appreciated. If I have omitted any significant info, please ask. May the new year 2009 see you enjoying health and happiness! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#6
|
|||
|
|||
![]()
On Thu, 1 Jan 2009 17:57:45 -0000, "Gerry" wrote:
John Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? Try HD Tune only gives information and does not fix any problems. Download and run it and see what it turns up. You want HD Tune (freeware) version 2.55 not HD Tune Pro (not Freeware) version 3.00. http://www.hdtune.com/ Select the Info tabs and place the cursor on the drive under Drive letter and then double click the two page icon ( copy to Clipboard ) and copy into a further message. HD Tune: WDC WD3200AAKS-00VYA Health ID Current Worst Threshold Data Status (01) Raw Read Error Rate 200 200 51 0 Ok (03) Spin Up Time 180 179 21 3975 Ok (04) Start/Stop Count 99 99 0 1225 Ok (05) Reallocated Sector Count 200 200 140 0 Ok (07) Seek Error Rate 100 253 51 0 Ok (09) Power On Hours Count 99 99 0 1410 Ok (0A) Spin Retry Count 100 100 51 0 Ok (0B) Calibration Retry Count 100 100 51 0 Ok (0C) Power Cycle Count 100 100 0 896 Ok (C0) Power Off Retract Count 200 200 0 132 Ok (C1) Load Cycle Count 200 200 0 1229 Ok (C2) Temperature 105 102 0 42 Ok (C4) Reallocated Event Count 200 200 0 0 Ok (C5) Current Pending Sector 200 200 0 0 Ok (C6) Offline Uncorrectable 200 200 0 0 Ok (C7) Ultra DMA CRC Error Count 200 200 0 0 Ok (C8) Write Error Rate 200 200 51 0 Ok Power On Time : 1410 Health Status : OK Make sure you do a full surface scan with HD Tune. The "Error Scan" showed 100% green. Does anything in trhe above numbesr give you any indication of trouble, Gerry? Thanks for trying to help! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#7
|
|||
|
|||
![]()
johnn
I can see no problems in the information provided. Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? Can you copy the contents from the Info tab? What is the CPU and how much RAM does your computer have? Right click on the My Computer icon on your Desktop and select Properties to get this information. Try Ctrl+Alt+Delete to select Task Manager and click the Performance Tab. Under Commit Charge what is the Total, the Limit and the Peak? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ johnn wrote: On Thu, 1 Jan 2009 17:57:45 -0000, "Gerry" wrote: John Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? Try HD Tune only gives information and does not fix any problems. Download and run it and see what it turns up. You want HD Tune (freeware) version 2.55 not HD Tune Pro (not Freeware) version 3.00. http://www.hdtune.com/ Select the Info tabs and place the cursor on the drive under Drive letter and then double click the two page icon ( copy to Clipboard ) and copy into a further message. HD Tune: WDC WD3200AAKS-00VYA Health ID Current Worst Threshold Data Status (01) Raw Read Error Rate 200 200 51 0 Ok (03) Spin Up Time 180 179 21 3975 Ok (04) Start/Stop Count 99 99 0 1225 Ok (05) Reallocated Sector Count 200 200 140 0 Ok (07) Seek Error Rate 100 253 51 0 Ok (09) Power On Hours Count 99 99 0 1410 Ok (0A) Spin Retry Count 100 100 51 0 Ok (0B) Calibration Retry Count 100 100 51 0 Ok (0C) Power Cycle Count 100 100 0 896 Ok (C0) Power Off Retract Count 200 200 0 132 Ok (C1) Load Cycle Count 200 200 0 1229 Ok (C2) Temperature 105 102 0 42 Ok (C4) Reallocated Event Count 200 200 0 0 Ok (C5) Current Pending Sector 200 200 0 0 Ok (C6) Offline Uncorrectable 200 200 0 0 Ok (C7) Ultra DMA CRC Error Count 200 200 0 0 Ok (C8) Write Error Rate 200 200 51 0 Ok Power On Time : 1410 Health Status : OK Make sure you do a full surface scan with HD Tune. The "Error Scan" showed 100% green. Does anything in trhe above numbesr give you any indication of trouble, Gerry? Thanks for trying to help! __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#8
|
|||
|
|||
![]()
On Mon, 5 Jan 2009 01:09:54 -0000, "Gerry" wrote:
johnn I can see no problems in the information provided. Thanks. Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? I do not recall the problem ever occurring when booting the computer from a "shut-down" state. It does happen virtually every time when I try to restore it from a hibernated state. It did not do so originally, but started about 2 weeks ago now. My original post in this thread gives more details. Can you copy the contents from the Info tab? Part: 1 Drive "C" Cap 305242 MB usage 5.47% NTFS Bootable: Yes All supported features are checked EXCEPT "Advanced Power Management". What is the CPU Belarc tells me: 2.53 gigahertz Intel Core2 Duo 64 kilobyte primary memory cache 3072 kilobyte secondary memory cache and how much RAM does your computer have? 3.24 gig ( ithought I specified 4 gig) - Belarc says: 3318 Megabytes Installed Memory Slot 'J1MY' has 2048 MB Slot 'J2MY' is Empty Slot 'J3MY' has 2048 MB Slot 'J4MY' is Empty Try Ctrl+Alt+Delete to select Task Manager and click the Performance Tab. Under Commit Charge what is the Total, the Limit and the Peak? Total (changes constantly) 546512 - 547248 Limit 3231720 Peak 627196 I did a Western Digital Data LifeGuard diagnostics (my hard drive is a WDC WD3200 AAKS). It showed no problems. Thanks, Gerry, for taking an interest! Good night! (my bedtime in Ontario, Canada). __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#9
|
|||
|
|||
![]()
If it occurs every time you come out of hibernation take this approach to
the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. "johnn" wrote in message ... On Mon, 5 Jan 2009 01:09:54 -0000, "Gerry" wrote: johnn I can see no problems in the information provided. Thanks. Is the error occuring only when coming out of hibernation or was that just the occasion when it first occurred? I do not recall the problem ever occurring when booting the computer from a "shut-down" state. It does happen virtually every time when I try to restore it from a hibernated state. It did not do so originally, but started about 2 weeks ago now. My original post in this thread gives more details. Can you copy the contents from the Info tab? Part: 1 Drive "C" Cap 305242 MB usage 5.47% NTFS Bootable: Yes All supported features are checked EXCEPT "Advanced Power Management". What is the CPU Belarc tells me: 2.53 gigahertz Intel Core2 Duo 64 kilobyte primary memory cache 3072 kilobyte secondary memory cache and how much RAM does your computer have? 3.24 gig ( ithought I specified 4 gig) - Belarc says: 3318 Megabytes Installed Memory Slot 'J1MY' has 2048 MB Slot 'J2MY' is Empty Slot 'J3MY' has 2048 MB Slot 'J4MY' is Empty Try Ctrl+Alt+Delete to select Task Manager and click the Performance Tab. Under Commit Charge what is the Total, the Limit and the Peak? Total (changes constantly) 546512 - 547248 Limit 3231720 Peak 627196 I did a Western Digital Data LifeGuard diagnostics (my hard drive is a WDC WD3200 AAKS). It showed no problems. Thanks, Gerry, for taking an interest! Good night! (my bedtime in Ontario, Canada). __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#10
|
|||
|
|||
![]()
On Mon, 5 Jan 2009 12:03:34 -0600, "Unknown" wrote:
If it occurs every time you come out of hibernation take this approach to the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. Thanks for your interest in my problem, and for suggesting a solution. That thought had occurred to me also. What I did is this: 1. disable the hibernate feature - this removes the file hiberfil.sys. 2. defrag the hard drive. (my resoning was that, when I re-enable the hibernate feature the file may not be located on the very same space on the hard drive). 3. enabled the hibernate feature. The problem continues . . . . . . __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#11
|
|||
|
|||
![]()
johnn
Is the computer a Desktop or Laptop? What are the Power Option settings -Start, Control Panel, Power Options? -- Hope this helps. Gerry ~~~~ FCA Stourport, England Enquire, plan and execute ~~~~~~~~~~~~~~~~~~~ johnn wrote: On Mon, 5 Jan 2009 12:03:34 -0600, "Unknown" wrote: If it occurs every time you come out of hibernation take this approach to the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. Thanks for your interest in my problem, and for suggesting a solution. That thought had occurred to me also. What I did is this: 1. disable the hibernate feature - this removes the file hiberfil.sys. 2. defrag the hard drive. (my resoning was that, when I re-enable the hibernate feature the file may not be located on the very same space on the hard drive). 3. enabled the hibernate feature. The problem continues . . . . . . __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#12
|
|||
|
|||
![]()
Try disabling hibernate and then deleting the hiberfil. (Defrag may not have
moved the file at all) "johnn" wrote in message ... On Mon, 5 Jan 2009 12:03:34 -0600, "Unknown" wrote: If it occurs every time you come out of hibernation take this approach to the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. Thanks for your interest in my problem, and for suggesting a solution. That thought had occurred to me also. What I did is this: 1. disable the hibernate feature - this removes the file hiberfil.sys. 2. defrag the hard drive. (my resoning was that, when I re-enable the hibernate feature the file may not be located on the very same space on the hard drive). 3. enabled the hibernate feature. The problem continues . . . . . . __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#13
|
|||
|
|||
![]()
Cancel the above. I turned off hibernate and did a search and could not find
hiberfil. I take that as an indication the file was really deleted. "johnn" wrote in message ... On Mon, 5 Jan 2009 12:03:34 -0600, "Unknown" wrote: If it occurs every time you come out of hibernation take this approach to the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. Thanks for your interest in my problem, and for suggesting a solution. That thought had occurred to me also. What I did is this: 1. disable the hibernate feature - this removes the file hiberfil.sys. 2. defrag the hard drive. (my resoning was that, when I re-enable the hibernate feature the file may not be located on the very same space on the hard drive). 3. enabled the hibernate feature. The problem continues . . . . . . __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#14
|
|||
|
|||
![]()
If the computer is only six weeks old, contact the seller and tell them the
disk is defective. (let them fix it) "johnn" wrote in message ... On Mon, 5 Jan 2009 12:03:34 -0600, "Unknown" wrote: If it occurs every time you come out of hibernation take this approach to the problem: Object is to create a new hiberfil. That is a dedicated section on your hard drive where the hibernation data is stored. This file CANNOT be deleted while hibernation is configured to run. You must turn off hibernation, then search for 'hiberfil' (it will be C:\hiberfil.sys) and delete it. Then go back and re-enable hibernation and a new hiberfil will be created. Thanks for your interest in my problem, and for suggesting a solution. That thought had occurred to me also. What I did is this: 1. disable the hibernate feature - this removes the file hiberfil.sys. 2. defrag the hard drive. (my resoning was that, when I re-enable the hibernate feature the file may not be located on the very same space on the hard drive). 3. enabled the hibernate feature. The problem continues . . . . . . __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
#15
|
|||
|
|||
![]()
On Mon, 5 Jan 2009 13:50:15 -0600, "Unknown" wrote:
Try disabling hibernate and then deleting the hiberfil. (Defrag may not have moved the file at all) When I uncheck "Enable hibernation" the hiberfil.sys file disappears - nothing to delete. That's why I disabled hibernate, then defragged the drive, then re-enabled hibernate; hoping that the hiberfil.sys file would be written to a different location on the drive. __________________________________ johnn __________________________________ "God is dead" - Nietzsche (1844-1935) "Nietzsche is dead" - God |
Thread Tools | |
Display Modes | |
|
|