|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#1
March 13th 14, 11:02 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
Portmon log for Paul (Part1)
Paul, here is the Portman log file. This is connecting, and a small
time loading Firefox and connecting to google. I cut it off, because it was getting huge, and I have a limit on the amount of bytes I can post to the newsgroups. This log involves TWO connections, the first one failed, then it retried. I generally have to try to connect at least 8 times before it works. Often, I hear the modem dial, then I hear the operator saying "I'm sorry, the number you have dialed......". Other times it dials, and I still hear the dialtone. Every so often, I actuially get the modem connecting tones, but sometimes it still dont connect. Although, there are times that I hear those tones on my W98 machine and dont connect either. That problem is probably my server. Yesterday, I removed the modem from the puter, I removed all the drivers for it, and even removed some regisrtry sections for the modem. Then I replaced the modem and reinstalled the driiver pack, which comes for that modem, from Compaq (for this Compaq model). Since then, after repeated tries to connect, when I actually do connect, it does seem to work, but slower than molasses in January. This morning, I went to http://windows.microsoft.com/en-us/windows/wallpaper and started to download wallpapers as a test. In three hours, I got this: 25.65megs of data received 3.3megs sent I was connected at 38.6 connect speed. Therefore, I transferred about 30 megs of data in 3 hours. That's only 10 megs per hour. I can do almost triple that on my W98 machine. And I had wallpapers downloading continuously, 2 or more at a time, so there were no delays. I've also noted that if I do not keep downloading, the modem disconnects. My win98 machine can stay connected for a whole day with nothing happening, unless my server is "processing", which they sort of do on Sunday nights around 2 to 4 am. I also tried to DL a file. I got about 1.6 to 1.8 KBPS. On my W98 machine, I normally get 4.5 to 6.5 kbps, and have topped out at 7.3kbps a few times. So, the XP connection is at least working, and I am posting this from the XP puter, but I am downloading wallpapers to keep the connection active, while I type this. So, while I can actually connect and receive data now, it's horribly slow, and a real bitch to establish the connection. I have not been able to connect above 39.6, sometimes only 24.0 to 28.0. Here is the Portmon log. I changed the phone number to 555-1212, and my user name/ password is all #########, as well as the name of my server. Otherwise it's just what the program saved. There was one other change I made yesterday. It was set for HAVING a network (besides the internet), I set network to NONE. (Probably because there was a network card in this machine when I installed XP. I have since removed that card, since it's nto needed now. ****.... I'M GONNA HAVE TO SEND THIS IN SEVERAL PARTS. DUE TO AIOE MESSAGE SIZE LIMIT. ---- Portmon log ---- [\\CASEY-XP] 0 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 1: . 0 0.00001397 SUCCESS 1 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 1 0.00000726 SUCCESS 2 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 2 0.00000251 SUCCESS 3 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 13 3 0.00001062 SUCCESS Length 13: .NO CARRIER.. 4 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 4 0.00000391 SUCCESS 5 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 6 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 6 0.00000475 SUCCESS 7 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 7 0.00000503 SUCCESS 8 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 4: ATH. 8 0.00087497 SUCCESS 5 0.17899230 SUCCESS Length 1: A 9 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 9 0.00001090 SUCCESS 10 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 9 10 0.00001229 SUCCESS Length 9: TH...OK.. 11 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 11 0.00000279 SUCCESS 12 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 13 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 13 0.00000531 SUCCESS 14 0.00000000 SVCHOST.EXE IOCTL_SERIAL_CLEAR_STATS PTSerial0 14 0.00000363 SUCCESS 15 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 15 0.00000307 SUCCESS 16 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 16 0.00000251 SUCCESS 17 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 17 0.00000335 SUCCESS 18 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 18 0.00000251 SUCCESS 19 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 19 0.00000307 SUCCESS 20 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 20 0.00000559 SUCCESS 21 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 21 0.00000419 SUCCESS 22 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 22 0.00000559 SUCCESS 23 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 23 0.00000307 SUCCESS 24 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 24 0.00000670 SUCCESS 25 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 25 0.00000251 SUCCESS 26 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 26 0.00001956 SUCCESS 27 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 3: AT. 27 0.00127363 SUCCESS 12 0.18934948 SUCCESS Length 1: A 28 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 28 0.00001006 SUCCESS 29 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 8 29 0.00001145 SUCCESS Length 8: T...OK.. 30 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 30 0.00000307 SUCCESS 31 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 32 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 24: AT&FE1&C1&D2&K3V1W3S0=0. 32 0.00070903 SUCCESS 31 0.00630667 SUCCESS Length 1: A 33 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 33 0.00000307 SUCCESS 34 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 29 34 0.00000615 SUCCESS Length 29: T&FE1&C1&D2&K3V1W3S0=0...OK.. 35 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 35 0.00000279 SUCCESS 36 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 37 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 30: ATS7=60S30=0M1\N3%%C3&K3B0N1X4. 37 0.00173765 SUCCESS 36 0.01639622 SUCCESS Length 1: A 38 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 38 0.00000279 SUCCESS 39 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 35 39 0.00000503 SUCCESS Length 35: TS7=60S30=0M1\N3%C3&K3B0N1X4...OK.. 40 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 40 0.00000279 SUCCESS 41 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 42 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 7: ATS0=0. 42 0.00278052 SUCCESS 41 0.01643868 SUCCESS Length 1: A 43 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 43 0.00000307 SUCCESS 44 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 12 44 0.00000587 SUCCESS Length 12: TS0=0...OK.. 45 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 45 0.00000279 SUCCESS 46 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 47 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: DSR 47 0.00000950 SUCCESS 48 0.00000000 SVCHOST.EXE IOCTL_SERIAL_WAIT_ON_MASK PTSerial0 49 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0030 49 0.00000531 SUCCESS 50 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B000C 50 0.00000782 SUCCESS 51 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0034 51 0.00000698 SUCCESS 52 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: 48 0.00398654 SUCCESS 52 0.00004358 SUCCESS 53 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: TXABORT TXCLEAR 53 0.00000670 SUCCESS 54 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: RXABORT 46 0.00415639 CANCELLED 54 0.00001481 SUCCESS 55 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: TXABORT RXABORT TXCLEAR RXCLEAR 55 0.00000531 SUCCESS 56 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_STATS PTSerial0 56 0.00000363 SUCCESS 57 0.00000000 SVCHOST.EXE IRP_MJ_CLEANUP PTSerial0 57 0.00001034 SUCCESS 58 0.00000000 SVCHOST.EXE IRP_MJ_CLOSE PTSerial0 58 0.00590354 SUCCESS 0 0.00000000 SVCHOST.EXE IRP_MJ_CREATE PTSerial0 Options: Open 0 0.00097470 SUCCESS 1 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_PROPERTIES PTSerial0 1 0.00015812 SUCCESS 2 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 2 0.00000391 SUCCESS 3 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 3 0.00000307 SUCCESS 4 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 4 0.00000335 SUCCESS 5 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 5 0.00000223 SUCCESS 6 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 6 0.00000335 SUCCESS 7 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 7 0.00000587 SUCCESS 8 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 8 0.00000363 SUCCESS 9 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 9 0.00000503 SUCCESS 10 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 10 0.00000335 SUCCESS 11 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 11 0.00000670 SUCCESS 12 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 12 0.00001676 SUCCESS 13 0.00000000 SVCHOST.EXE IOCTL_SERIAL_CLEAR_STATS PTSerial0 13 0.00000447 SUCCESS 14 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: RXABORT 14 0.00000363 SUCCESS 15 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_TIMEOUTS PTSerial0 RI:20 RM:0 RC:0 WM:10 WC:2000 15 0.00000279 SUCCESS 16 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 16 0.00000196 SUCCESS 17 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 17 0.00000447 SUCCESS 18 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 19 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 19 0.00000223 SUCCESS 20 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 20 0.00000279 SUCCESS 21 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 21 0.00000251 SUCCESS 22 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 22 0.00000196 SUCCESS 23 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 23 0.00000447 SUCCESS 24 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 24 0.00000419 SUCCESS 25 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 25 0.00000335 SUCCESS 26 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 26 0.00000307 SUCCESS 27 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 27 0.00000670 SUCCESS 28 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 28 0.00000279 SUCCESS 29 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 29 0.00000531 SUCCESS 30 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 3: AT. 30 0.00247797 SUCCESS 18 0.23405014 SUCCESS Length 1: A 31 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 31 0.00001090 SUCCESS 32 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 8 32 0.00001145 SUCCESS Length 8: T...OK.. 33 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 33 0.00000279 SUCCESS 34 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 35 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 24: AT&FE1&C1&D2&K3V1W3S0=0. 35 0.00117752 SUCCESS 34 0.00971101 SUCCESS Length 1: A 36 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 36 0.00001117 SUCCESS 37 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 29 37 0.00001090 SUCCESS Length 29: T&FE1&C1&D2&K3V1W3S0=0...OK.. 38 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 38 0.00000279 SUCCESS 39 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 40 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 30: ATS7=60S30=0M1\N3%%C3&K3B0N1X4. 40 0.00217486 SUCCESS 39 0.01619843 SUCCESS Length 1: A 41 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 41 0.00000950 SUCCESS 42 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 35 42 0.00001145 SUCCESS Length 35: TS7=60S30=0M1\N3%C3&K3B0N1X4...OK.. 43 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 43 0.00000279 SUCCESS 44 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 45 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 7: ATS0=0. 45 0.00105265 SUCCESS 44 0.01623838 SUCCESS Length 1: A 46 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 46 0.00001034 SUCCESS 47 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 12 47 0.00001173 SUCCESS Length 12: TS0=0...OK.. 48 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 48 0.00000307 SUCCESS 49 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 50 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: DSR 50 0.00000838 SUCCESS 51 0.00000000 SVCHOST.EXE IOCTL_SERIAL_WAIT_ON_MASK PTSerial0 52 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0030 52 0.00000279 SUCCESS 53 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0034 54 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 54 0.00000279 SUCCESS 55 0.00000000 SVCHOST.EXE IOCTL_SERIAL_CLEAR_STATS PTSerial0 55 0.00000391 SUCCESS 56 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 56 0.00000279 SUCCESS 57 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 57 0.00000251 SUCCESS 58 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 58 0.00000307 SUCCESS 59 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 59 0.00000251 SUCCESS 60 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 60 0.00000251 SUCCESS 61 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 61 0.00000475 SUCCESS 62 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 62 0.00000447 SUCCESS 63 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 63 0.00000503 SUCCESS 64 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 64 0.00000335 SUCCESS 65 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 65 0.00000726 SUCCESS 66 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 66 0.00000279 SUCCESS 67 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 67 0.00000391 SUCCESS 68 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: 51 0.00085653 SUCCESS 68 0.00002179 SUCCESS 69 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 3: AT. 69 0.00200752 SUCCESS 49 0.01627302 SUCCESS Length 1: A 70 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 70 0.00000866 SUCCESS 71 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 8 71 0.00001090 SUCCESS Length 8: T...OK.. 72 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 72 0.00000279 SUCCESS 73 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 74 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 24: AT&FE1&C1&D2&K3V1W3S0=0. 74 0.00193768 SUCCESS 73 0.01315586 SUCCESS Length 1: A 75 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 75 0.00001062 SUCCESS 76 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 29 76 0.00001257 SUCCESS Length 29: T&FE1&C1&D2&K3V1W3S0=0...OK.. 77 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 77 0.00000279 SUCCESS 78 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 79 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 30: ATS7=60S30=0M1\N3%%C3&K3B0N1X4. 79 0.00300820 SUCCESS 78 0.01614702 SUCCESS Length 1: A 80 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 80 0.00001062 SUCCESS 81 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 35 81 0.00001117 SUCCESS Length 35: TS7=60S30=0M1\N3%C3&K3B0N1X4...OK.. 82 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 82 0.00000279 SUCCESS 83 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 84 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0030 84 0.00000643 SUCCESS 85 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 13: ATDT555-1212. 85 0.00184996 SUCCESS 83 0.01628168 SUCCESS Length 1: A 86 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 86 0.00000866 SUCCESS 87 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 12 87 0.00001062 SUCCESS Length 12: TDT555-1212. 88 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 88 0.00000279 SUCCESS 89 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 89 65.21566233 SUCCESS Length 1: . 90 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 90 0.00001173 SUCCESS 91 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 91 0.00000251 SUCCESS 92 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 13 92 0.00001090 SUCCESS Length 13: .NO CARRIER.. 93 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 93 0.00000279 SUCCESS 94 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 95 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 95 0.00000531 SUCCESS 96 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 96 0.00000503 SUCCESS 97 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 4: ATH. 97 0.00237265 SUCCESS 94 0.19558435 SUCCESS Length 1: A 98 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 98 0.00001006 SUCCESS 99 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 9 99 0.00001313 SUCCESS Length 9: TH...OK.. 100 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 100 0.00000279 SUCCESS 101 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 102 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 102 0.00000447 SUCCESS 103 0.00000000 SVCHOST.EXE IOCTL_SERIAL_CLEAR_STATS PTSerial0 103 0.00000391 SUCCESS 104 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 104 0.00000335 SUCCESS 105 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 105 0.00000251 SUCCESS 106 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 106 0.00000335 SUCCESS 107 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 107 0.00000279 SUCCESS 108 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 108 0.00000279 SUCCESS 109 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 109 0.00000475 SUCCESS 110 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 110 0.00000419 SUCCESS 111 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 111 0.00000503 SUCCESS 112 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 112 0.00000307 SUCCESS 113 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 113 0.00000670 SUCCESS 114 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 114 0.00000279 SUCCESS 115 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 115 0.00000391 SUCCESS 116 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 3: AT. 116 0.00104622 SUCCESS 101 0.18594961 SUCCESS Length 1: A 117 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 117 0.00000447 SUCCESS 118 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 8 118 0.00000810 SUCCESS Length 8: T...OK.. 119 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 119 0.00000279 SUCCESS 120 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 121 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 24: AT&FE1&C1&D2&K3V1W3S0=0. 121 0.00324119 SUCCESS 120 0.00982192 SUCCESS Length 1: A 122 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 122 0.00000307 SUCCESS 123 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 29 123 0.00000475 SUCCESS Length 29: T&FE1&C1&D2&K3V1W3S0=0...OK.. 124 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 124 0.00000251 SUCCESS 125 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 126 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 30: ATS7=60S30=0M1\N3%%C3&K3B0N1X4. 126 0.00093252 SUCCESS 125 0.01308853 SUCCESS Length 1: A 127 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 127 0.00000279 SUCCESS 128 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 35 128 0.00000475 SUCCESS Length 35: TS7=60S30=0M1\N3%C3&K3B0N1X4...OK.. 129 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 129 0.00000279 SUCCESS 130 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 131 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 7: ATS0=0. 131 0.00198936 SUCCESS 130 0.01643645 SUCCESS Length 1: A 132 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 132 0.00000279 SUCCESS 133 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 12 133 0.00000503 SUCCESS Length 12: TS0=0...OK.. 134 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 134 0.00000251 SUCCESS 135 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 136 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: DSR 136 0.00000922 SUCCESS 137 0.00000000 SVCHOST.EXE IOCTL_SERIAL_WAIT_ON_MASK PTSerial0 138 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0030 138 0.00000643 SUCCESS 139 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B000C 139 0.00000782 SUCCESS 140 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0034 53 65.71330881 CANCELLED 140 0.00001173 SUCCESS 141 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_WAIT_MASK PTSerial0 Mask: 137 0.01206019 SUCCESS 141 0.00004665 SUCCESS 142 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: TXABORT TXCLEAR 142 0.00000726 SUCCESS 143 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: RXABORT 135 0.01223005 CANCELLED 143 0.00001369 SUCCESS 144 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: TXABORT RXABORT TXCLEAR RXCLEAR 144 0.00000559 SUCCESS 145 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_STATS PTSerial0 145 0.00000363 SUCCESS 146 0.00000000 SVCHOST.EXE IRP_MJ_CLEANUP PTSerial0 146 0.00001034 SUCCESS 147 0.00000000 SVCHOST.EXE IRP_MJ_CLOSE PTSerial0 147 0.01365285 SUCCESS 148 0.00000000 SVCHOST.EXE IRP_MJ_CREATE PTSerial0 Options: Open 148 0.00100627 SUCCESS 149 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_PROPERTIES PTSerial0 149 0.00015700 SUCCESS 150 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 150 0.00000363 SUCCESS 151 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 151 0.00000363 SUCCESS 152 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 152 0.00000335 SUCCESS 153 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 153 0.00000223 SUCCESS 154 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 154 0.00000307 SUCCESS 155 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 155 0.00000615 SUCCESS 156 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 156 0.00000447 SUCCESS 157 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 157 0.00000475 SUCCESS 158 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 158 0.00000335 SUCCESS 159 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 159 0.00000726 SUCCESS 160 0.00000000 SVCHOST.EXE IRP_MJ_DEVICE_CONTROL PTSerial0 IOCTL: 0x2B0008 160 0.00001620 SUCCESS 161 0.00000000 SVCHOST.EXE IOCTL_SERIAL_CLEAR_STATS PTSerial0 161 0.00000475 SUCCESS 162 0.00000000 SVCHOST.EXE IOCTL_SERIAL_PURGE PTSerial0 Purge: RXABORT 162 0.00000363 SUCCESS 163 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_TIMEOUTS PTSerial0 RI:20 RM:0 RC:0 WM:10 WC:2000 163 0.00000307 SUCCESS 164 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_COMMCONFIG PTSerial0 164 0.00000251 SUCCESS 165 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 165 0.00000447 SUCCESS 166 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 167 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_BAUD_RATE PTSerial0 167 0.00000223 SUCCESS 168 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_LINE_CONTROL PTSerial0 168 0.00000279 SUCCESS 169 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_CHARS PTSerial0 169 0.00000251 SUCCESS 170 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_HANDFLOW PTSerial0 170 0.00000223 SUCCESS 171 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_BAUD_RATE PTSerial0 Rate: 115200 171 0.00000503 SUCCESS 172 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 172 0.00000447 SUCCESS 173 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_LINE_CONTROL PTSerial0 StopBits: 1 Parity: NONE WordLength: 8 173 0.00000335 SUCCESS 174 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_CHAR PTSerial0 EOF:0 ERR:0 BRK:0 EVT:0 XON:11 XOFF:13 174 0.00000279 SUCCESS 175 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_HANDFLOW PTSerial0 Shake:9 Replace:80 XonLimit:10 XoffLimit:10 175 0.00000726 SUCCESS 176 0.00000000 SVCHOST.EXE IOCTL_SERIAL_SET_DTR PTSerial0 176 0.00000279 SUCCESS 177 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_MODEMSTATUS PTSerial0 177 0.00000587 SUCCESS 178 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 3: AT. 178 0.00286070 SUCCESS 166 0.22738337 SUCCESS Length 1: A 179 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 179 0.00001173 SUCCESS 180 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 8 180 0.00001201 SUCCESS Length 8: T...OK.. 181 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 181 0.00000307 SUCCESS 182 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 183 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 24: AT&FE1&C1&D2&K3V1W3S0=0. 183 0.00055454 SUCCESS 182 0.00629801 SUCCESS Length 1: A 184 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 184 0.00000307 SUCCESS 185 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 29 185 0.00000670 SUCCESS Length 29: T&FE1&C1&D2&K3V1W3S0=0...OK.. 186 0.00000000 SVCHOST.EXE IOCTL_SERIAL_GET_COMMSTATUS PTSerial0 186 0.00000279 SUCCESS 187 0.00000000 SVCHOST.EXE IRP_MJ_READ PTSerial0 Length 1 188 0.00000000 SVCHOST.EXE IRP_MJ_WRITE PTSerial0 Length 30: ATS7=60S30=0M1\N3%%C3&K3B0N1X4. 
|
| Ads |
|
#3
March 14th 14, 04:58 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
Paul, here is the Portman log file for Win98. This is logged until
connected. Portmon works fine on Win98. As before, multiple part post..... This one got huge ! I connected at 38.6, which is slow for me on this computer, but it tends to vary. I do have a bit of trouble connecting on here too, meaning that I can call in and not actually connect, via name/password, and occasionally it hangs, adn does nto connect at all. But this is probably my ISP server. I'm used to that happening, usually 2 or 3 tries do the trick. Shutting off the modem, nad back on again seems to help too when it's not trying to connect. But aside from that, I always get a good solid and fast connection once i am connected, and I can leave it on for hours, without it disconnecting. This will probably take 5 parts to send.... So much repeated data, but I'm not sure what parts to delete, or I'd trim it. ---Portmon log--- 0 0.00000480 Tapisrv VCOMM_EscapeCommFunction 0x0 0x700465 Unknown Func: 38 1 0.00000320 Tapisrv VCOMM_EscapeCommFunction 0x0 0x700465 Unknown Func: 38 2 0.00191520 Tapisrv VCOMM_OpenComm COM2 SUCCESS 3 0.00000320 Tapisrv VCOMM_EnableCommNotification COM2 SUCCESS 4 0.00000320 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETUPDATETIMERADDR 5 0.00000640 Tapisrv VCOMM_SetReadCallBack COM2 SUCCESS Trigger: -1 6 0.00000400 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 7 0.00000320 Tapisrv VCOMM_ReadComm COM2 SUCCESS Length: 0: 8 0.00000400 Tapisrv VCOMM_PurgeComm COM2 SUCCESS Transmit Queue 9 0.00000320 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 10 0.00000640 Tapisrv VCOMM_SetReadCallBack COM2 SUCCESS Trigger: 1 11 0.00000320 Tapisrv VCOMM_GetCommState COM2 SUCCESS Baud: 115200 Bits: 8 Stop: 1 Parity: None 12 0.23299360 Tapisrv VCOMM_SetCommState COM2 SUCCESS Mask: ffffffff Baud: 115200 Bits: 8 Stop: 1 Parity: None 13 0.00000800 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETDTR 14 0.00000480 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETRTS 15 0.23956080 Tapisrv VCOMM_OpenComm Creative Modem Blaster V.92 DE5721 SUCCESS 16 0.00000400 Tapisrv VCOMM_EscapeCommFunction Creative Modem Blaster V.92 DE5721 SUCCESS CLRTIMERLOGIC 17 0.00000320 Tapisrv VCOMM_EscapeCommFunction Creative Modem Blaster V.92 DE5721 SUCCESS IGNOREERRORONREADS 18 0.00028400 Tapisrv VCOMM_SetupComm Creative Modem Blaster V.92 DE5721 SUCCESS RxSize: 4096 TxSize: 0 19 0.00000800 Tapisrv VCOMM_SetupComm Creative Modem Blaster V.92 DE5721 SUCCESS RxSize: 4096 TxSize: 4096 20 0.00000320 Tapisrv VCOMM_GetCommState COM2 SUCCESS Baud: 115200 Bits: 8 Stop: 1 Parity: None 21 0.00001600 Tapisrv VCOMM_SetCommState COM2 SUCCESS Mask: ffffffff Baud: 115200 Bits: 8 Stop: 1 Parity: None 22 0.00000480 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETDTR 23 0.00000480 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETRTS 24 0.00000560 Tapisrv VCOMM_SetReadCallBack COM2 SUCCESS Trigger: -1 25 0.00000400 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 26 0.00000400 Tapisrv VCOMM_ReadComm COM2 SUCCESS Length: 0: 27 0.00000480 Tapisrv VCOMM_PurgeComm COM2 SUCCESS Transmit Queue 28 0.00000240 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 29 0.00000320 Tapisrv VCOMM_SetReadCallBack COM2 SUCCESS Trigger: 1 30 0.00000400 Tapisrv VCOMM_SetCommEventMask COM2 SUCCESS 31 0.00000320 Tapisrv VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 32 0.00000240 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 33 0.00000320 Tapisrv VCOMM_PurgeComm COM2 SUCCESS Receive Queue 34 0.00000320 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 35 0.00000320 Tapisrv VCOMM_ReadComm COM2 SUCCESS Length: 0: 36 0.00000560 Tapisrv VCOMM_EscapeCommFunction COM2 SUCCESS SETDTR 37 0.00000320 Tapisrv VCOMM_ClearCommError COM2 SUCCESS NOERROR 38 0.00000320 Tapisrv VCOMM_ReadComm COM2 SUCCESS Length: 0: 39 0.00000720 Tapisrv VCOMM_WriteComm COM2 SUCCESS Length: 6: ATZ&F. 40 0.00000320 Tapisrv VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 41 0.00000240 Tapisrv VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 42 0.00000320 Tapisrv VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 43 0.00000880 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 44 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 45 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: A 46 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 47 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 48 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: T 49 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 50 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 51 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: Z 52 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 53 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 54 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: & 55 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 56 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 57 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: F 58 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 59 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 60 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 61 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 62 0.00000320 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 63 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 64 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 65 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 66 0.00000400 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 67 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 68 0.00000400 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 69 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 70 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 71 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 72 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 73 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 74 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: O 75 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 76 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 77 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: K 78 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 79 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 80 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 81 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 82 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 83 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 84 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 85 0.00000640 KERNEL32 VCOMM_WriteComm COM2 SUCCESS Length: 33: AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1. 86 0.00000320 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 17 87 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: 1 88 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 89 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 90 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 91 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 92 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: A 93 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 94 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: T 95 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 96 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 97 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 98 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: I 99 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 100 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: B 101 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 102 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: C 103 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 104 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 105 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 106 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 107 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 108 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 109 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 110 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 111 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 112 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 113 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 114 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 115 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 116 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 117 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 118 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 119 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 120 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 121 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 122 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 123 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 124 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 125 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 126 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 127 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 128 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 129 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 130 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: , 131 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 132 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 133 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 134 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 135 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 136 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 137 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 138 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: P 139 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 140 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: C 141 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 142 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: W 143 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 144 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 145 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 146 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 147 0.00000560 KERNEL32 WriteNotifyProc COM2 VOID TRANSMIT: TXCHAR 148 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 149 0.00000240 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 150 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 151 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 152 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 153 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 2 154 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 155 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 156 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 157 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 158 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 159 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 160 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 161 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 162 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: P 163 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 164 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 165 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: M 166 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 167 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 168 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: H 169 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 170 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 171 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 172 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 173 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 174 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 175 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 176 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 177 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 178 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 179 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 180 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 181 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 182 0.00000240 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 183 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 184 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 185 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 186 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 187 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 188 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 189 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 190 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 191 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 192 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 193 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 194 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: O 195 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 196 0.00001280 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 197 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: K 198 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 199 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 200 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 201 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 202 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR
|
|
#4
March 14th 14, 05:01 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part2)
203 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS
Length: 1: . 204 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 205 0.00000640 KERNEL32 VCOMM_WriteComm COM2 SUCCESS Length: 45: ATE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;+GCI=B5;W2. 206 0.00000320 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 29 207 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: 1 208 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 209 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 210 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 211 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 212 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: A 213 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 214 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: T 215 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 216 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: E 217 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 218 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 219 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 220 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: V 221 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 222 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 223 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 224 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: S 225 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 226 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 227 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 228 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 229 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 230 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 231 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 232 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 233 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 234 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 235 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: & 236 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 237 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: C 238 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 239 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 240 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 241 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: & 242 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 243 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: D 244 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 245 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 2 246 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 247 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 248 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 249 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 250 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 251 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 252 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: M 253 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 254 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: R 255 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 256 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 257 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 258 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 2 259 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 260 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 261 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 262 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 263 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 264 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: D 265 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 266 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 267 0.00000320 KERNEL32 WriteNotifyProc COM2 VOID TRANSMIT: TXCHAR 268 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 269 0.00000320 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 270 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 271 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 272 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 273 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: R 274 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 275 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 276 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 277 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 278 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 279 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 280 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 281 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 282 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 283 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 284 0.00000240 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 285 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 286 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 287 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 288 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: E 289 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 290 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 291 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: R 292 0.00001280 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 293 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 294 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 295 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 296 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 297 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 298 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 299 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 300 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 301 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 302 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 303 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: + 304 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 305 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 306 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: G 307 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 308 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 309 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: C 310 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 311 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 312 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: I 313 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 314 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 315 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: = 316 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 317 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 318 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: B 319 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 320 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 321 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 322 0.00000320 KERNEL32 ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 323 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 324 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 5 325 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 326 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 327 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 328 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 329 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 330 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: W 331 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 332 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 333 0.00000240 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: 2 334 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 335 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 336 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 1: . 337 0.00000240 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 338 0.00000240 KERNEL32 VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 339 0.00000320 KERNEL32 VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 340 0.00000320 KERNEL32 VCOMM_ClearCommError COM2 SUCCESS NOERROR 341 0.00000320 KERNEL32 VCOMM_ReadComm COM2 SUCCESS Length: 0: 342 0.00000720 Portmon ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 343 0.00000560 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 344 0.00000480 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: . 345 0.00000480 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 346 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 347 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: . 348 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 349 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 350 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: O 351 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 352 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 353 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: K 354 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 355 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 356 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: . 357 0.00000240 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 358 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 359 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: . 360 0.00000240 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 361 0.00000800 Portmon VCOMM_WriteComm COM2 SUCCESS Length: 33: ATS7=90S30=0L3M1+ES=3,0,2;+DS=3;. 362 0.00000400 Portmon VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 17 363 0.00000400 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: 1 364 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 365 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 0: 366 0.00000480 Portmon ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 367 0.00000400 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 368 0.00000400 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: A 369 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 370 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: T 371 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 372 0.00000240 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: S 373 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 374 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 7 375 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 376 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: = 377 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 378 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 9 379 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 380 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 381 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 382 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: S 383 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 384 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 0: 385 0.00000400 Portmon ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 386 0.00000400 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 387 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 3 388 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 389 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 390 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 391 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: = 392 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 393 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 394 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 395 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: L 396 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 397 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 3 398 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 399 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: M 400 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 401 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 1 402 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 403 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 0: 404 0.00000640 Portmon ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 405 0.00000480 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 406 0.00000400 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: + 407 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 408 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: E 409 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 410 0.00000240 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: S 411 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 412 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: = 413 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 414 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 3 415 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 416 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: , 417 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 418 0.00000240 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 0 419 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 420 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: , 421 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 422 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 0: 423 0.00000480 Portmon WriteNotifyProc COM2 VOID TRANSMIT: TXCHAR 424 0.00000480 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 425 0.00000400 Portmon VCOMM_GetCommQueueStatus COM2 SUCCESS RX: 0 TX: 0 426 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 427 0.00000320 Portmon ReadNotifyProc COM2 VOID RECEIVE: RXCHAR 428 0.00000400 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 429 0.00000400 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 2 430 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 431 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 432 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 433 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 434 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 435 0.00000240 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: + 436 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 437 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 438 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: D 439 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 440 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 441 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: S 442 0.00000240 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 443 0.00000320 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 444 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: = 445 0.00000240 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 446 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 447 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: 3 448 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1 449 0.00000240 Portmon VCOMM_ClearCommError COM2 SUCCESS NOERROR 450 0.00000320 Portmon VCOMM_ReadComm COM2 SUCCESS Length: 1: ; 451 0.00000320 Portmon VCOMM_SetWriteCallBack COM2 SUCCESS Trigger: -1
|
|
#5
March 14th 14, 05:32 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
|
|
#6
March 14th 14, 06:08 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul [MODEM DOCTOR NOTES]
|
|
#7
March 14th 14, 06:14 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
On Fri, 14 Mar 2014 01:32:27 -0400, Paul wrote:
wrote: Paul, here is the Portman log file for Win98. This is logged until connected. Portmon works fine on Win98. As before, multiple part post..... This one got huge ! I connected at 38.6, which is slow for me on this computer, but it tends to vary. I do have a bit of trouble connecting on here too, meaning that I can call in and not actually connect, via name/password, and occasionally it hangs, adn does nto connect at all. But this is probably my ISP server. I'm used to that happening, usually 2 or 3 tries do the trick. Shutting off the modem, nad back on again seems to help too when it's not trying to connect. But aside from that, I always get a good solid and fast connection once i am connected, and I can leave it on for hours, without it disconnecting. This will probably take 5 parts to send.... So much repeated data, but I'm not sure what parts to delete, or I'd trim it. OK, but in this case, now I'm seeing the Win98 external (Creative) modem, and not the PCTel modem in the WinXP machine. The idea is, to compare the AT commands from the two OSes, to see if there are any differences at the AT Hayes Command Set level. The difference is, the external modem, the DSP portion doesn't change, when moved from the Win98 box to the WinXP box. In the case of the PCTel internal, both the DSP code is different, as well as the AT command set part (INIT string) could be different. ******* In the two files so far, there's not even an ATDT in there. No attempt to dial is recorded. No CONNECT message. And I'd definitely need the Creative manual to decode this. It's using some fancy command with multiple comma separated parameters. AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1 ATE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;+GCI=B5;W2 ATS7=90S30=0L3M1+ES=3,0,2;+DS=3; To make this fun, to compare apples to apples, we need the same modem, used by the two different OSes (where WinXP is sucking at transfers), then look to see evidence the INIT strings are different. If you use a dialup modem for both cases, that eliminates DSP differences. And to decode these things, I need the model number off the Creative, so I can track down roughly what manual to use. Paul As I said ,aAIOE is not letting nme send the other parts now. I get a "too much data sent" error. I have to wait a few hours to send any large messages again. So you want me to use the Creative External modem on the XP machine, right? I'm NOT gonna put the Pctel in the W98 machine, and risk screwing somethng up. I know that W98 is a bitch for setting up internal modems (of course XP is proving to be a bitch for ALL modems)  Please tell me how to install the Creative EXT modem, on the XP machine, without uninstalling the PCtel? I'm assuming there is a means to SELECT which modem to use. Actually, this creative modem came with a serial and a USB cable. I can not get it to work via the USB cable at all. I actually prefer the serial cable, but I was just truing the USB to see what would happen. I cant use that USB on W98, due to W98 USB limits. Please tell me how to swap modems, and I'll install the Creative EXT modem to the XP machine. It's a Creative Modem Blaster External V.92 Model DE5721. I have the drivers file on the harddrive in W98 machine. It was originally a CD. Contains the drivers, a fax program, and IE5.5 (yuck), plus some other useless crap. I ONLY run the driver installs, nothing more off that thing. I dont need fax either. The drivers have a SETUP installer file and are dated for 2002 (2K and XP). ones. There are also drivers for W98 and Win-ME on there. The drivers for XP and 2K are identical. ALL are from 2002, regardless of OS. These are the same drivers that i used to install that same modem on my W2k dual boot on my W98 machine. Same computer, same modem, same phone line, and I have never been able to get a usable connection under Win2000. It connects, but dont transfer data. (Pretty much the same I got on XP). BTW: The actual connection on the W98 occurred in part 4 of 4. Maybe I dont need to send part 3????? You tell me..... I'll send part 4 next, cuz AIOE will probably limit me again after one file send.....
|
|
#8
March 14th 14, 06:24 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul [MODEM DOCTOR NOTES]
On Fri, 14 Mar 2014 02:08:39 -0400, Paul wrote:
The disconnect timer was disabled on the PCTel modem. Perhaps the PPP protocol has some option for timing out, but I don't even remember any config stuff for PPP. Your problem sounds like spiral of death, but it's pretty hard to reach such a conclusion with the PCTel. Because it's DSP based, and doesn't have the same behaviors as the Creative would have. I mean, the PCTel software designers, wouldn't "emulate spiral of death" just for fun. They have a lot more room to do something intelligent. If you run Modem Doctor on the PCTel modem, the "flow control" indications are at the IOCTL level and are virtual. They still work in a similar way to how a physical modem might, because they're intended to emulate how an external would function. But the timing of those events, might not make the Modem Doctor happy. Just a guess. The PCTel doesn't have any hardware that corresponds to a COM port. But the software still makes one, by registering one for Device Manager. And it's all part of ensuring that programs (like HyperTerm), see the same software interfaces as they'd see with a real external modem. I think in terms of policy, you can set up a modem such that it drops the communications rate, if errors are encountered. The alternative, is to allow retransmissions (which waste bandwidth), and maintain the original connect rate for the entire session. I think that's an error control policy, so you could look at the Hayes Command Set and see if changing that policy helps at all or not. Paul What does DSP mean? I had a small program I once used to keep connected, when i had a really crappy ISP that would keep disconnecting me. It just sent a ping every minute or so. But this is not an ISP problem now. I can stay connected for many hours under W98. In fact people get ****ed at me because I tend to forget to disconnect and no one can call me.
|
|
#9
March 14th 14, 06:38 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
wrote:
On Fri, 14 Mar 2014 01:32:27 -0400, Paul wrote: wrote: Paul, here is the Portman log file for Win98. This is logged until connected. Portmon works fine on Win98. As before, multiple part post..... This one got huge ! I connected at 38.6, which is slow for me on this computer, but it tends to vary. I do have a bit of trouble connecting on here too, meaning that I can call in and not actually connect, via name/password, and occasionally it hangs, adn does nto connect at all. But this is probably my ISP server. I'm used to that happening, usually 2 or 3 tries do the trick. Shutting off the modem, nad back on again seems to help too when it's not trying to connect. But aside from that, I always get a good solid and fast connection once i am connected, and I can leave it on for hours, without it disconnecting. This will probably take 5 parts to send.... So much repeated data, but I'm not sure what parts to delete, or I'd trim it. OK, but in this case, now I'm seeing the Win98 external (Creative) modem, and not the PCTel modem in the WinXP machine. The idea is, to compare the AT commands from the two OSes, to see if there are any differences at the AT Hayes Command Set level. The difference is, the external modem, the DSP portion doesn't change, when moved from the Win98 box to the WinXP box. In the case of the PCTel internal, both the DSP code is different, as well as the AT command set part (INIT string) could be different. ******* In the two files so far, there's not even an ATDT in there. No attempt to dial is recorded. No CONNECT message. And I'd definitely need the Creative manual to decode this. It's using some fancy command with multiple comma separated parameters. AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1 ATE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;+GCI=B5;W2 ATS7=90S30=0L3M1+ES=3,0,2;+DS=3; To make this fun, to compare apples to apples, we need the same modem, used by the two different OSes (where WinXP is sucking at transfers), then look to see evidence the INIT strings are different. If you use a dialup modem for both cases, that eliminates DSP differences. And to decode these things, I need the model number off the Creative, so I can track down roughly what manual to use. Paul As I said ,aAIOE is not letting nme send the other parts now. I get a "too much data sent" error. I have to wait a few hours to send any large messages again. So you want me to use the Creative External modem on the XP machine, right? I'm NOT gonna put the Pctel in the W98 machine, and risk screwing somethng up. I know that W98 is a bitch for setting up internal modems (of course XP is proving to be a bitch for ALL modems) Please tell me how to install the Creative EXT modem, on the XP machine, without uninstalling the PCtel? I'm assuming there is a means to SELECT which modem to use. Actually, this creative modem came with a serial and a USB cable. I can not get it to work via the USB cable at all. I actually prefer the serial cable, but I was just truing the USB to see what would happen. I cant use that USB on W98, due to W98 USB limits. Please tell me how to swap modems, and I'll install the Creative EXT modem to the XP machine. It's a Creative Modem Blaster External V.92 Model DE5721. I have the drivers file on the harddrive in W98 machine. It was originally a CD. Contains the drivers, a fax program, and IE5.5 (yuck), plus some other useless crap. I ONLY run the driver installs, nothing more off that thing. I dont need fax either. The drivers have a SETUP installer file and are dated for 2002 (2K and XP). ones. There are also drivers for W98 and Win-ME on there. The drivers for XP and 2K are identical. ALL are from 2002, regardless of OS. These are the same drivers that i used to install that same modem on my W2k dual boot on my W98 machine. Same computer, same modem, same phone line, and I have never been able to get a usable connection under Win2000. It connects, but dont transfer data. (Pretty much the same I got on XP). BTW: The actual connection on the W98 occurred in part 4 of 4. Maybe I dont need to send part 3????? You tell me..... I'll send part 4 next, cuz AIOE will probably limit me again after one file send..... If you connect the modem to WinXP, you'd probably need to "Scan for hardware changes" in Device Manager or something. I don't remember what I did with mine. There's some text here, about some things to try. http://forums.cnet.com/7723-6142_102...tect-my-modem/ I was able to use my modem, under WinXP, after convincing it to "eat" a generic driver. The driver was Unimodem, rather than a branded US Robotics driver (as my modem was too old). For the external, you don't need a "custom" driver, and can potentially get away with using a generic driver from the list of modem drivers. The WinXP installer CD, would have a bunch of files with "mdm" in the name, and that would be part of the collection of modem install files. For example, I was able to find a mdmpctel.in_, which is a compressed version of mdmpctel.inf. That would be how your PCTel got installed. But for my USRobotics, the USR-provided driver in WinXP, refused to install, because my modem was too old. ******* Your original theory was, there was a difference between the way Win98 and WinXP use the modem, leading to what appeared to be spiral of death symptoms. We need a set of test conditions, where only differences in the Hayes Command Set used, could account for it. For PCTel type modems, it's not going to be possible to reach any conclusions about what the DSP is doing, as it isn't viewable. That means using the Creative External, because we can apply debugging techniques to it. I know you're working mightily to post the PortMon data, but there is an alternative you could try. Pastebin is a site that accepts text pastings. You could upload the entire PortMon thing there, get the URL generated from the upload and just post that here. I just pasted five lines of text here, for you to look at. Controls on the pastebin site were set to defaults. http://pastebin.com/AG3hpPge Paul
|
|
#10
March 14th 14, 06:56 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul [MODEM DOCTOR NOTES]
|
|
#11
March 14th 14, 07:06 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
On Fri, 14 Mar 2014 02:38:52 -0400, Paul wrote:
I just pasted five lines of text here, for you to look at. Controls on the pastebin site were set to defaults. http://pastebin.com/AG3hpPge Paul Ok, here it is..... http://pastebin.com/k6eL8RU7 I think I figured out how to install 2 modems, Use ENABLE and DISABLE in control panel to select the one I want to use. Let me know if that pastebin works.... That's a handy gadget..... sure beats flooding the newsgroup with all that stuff.
|
|
#12
March 14th 14, 08:13 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
wrote:
On Fri, 14 Mar 2014 02:38:52 -0400, Paul wrote: I just pasted five lines of text here, for you to look at. Controls on the pastebin site were set to defaults. http://pastebin.com/AG3hpPge Paul Ok, here it is..... http://pastebin.com/k6eL8RU7 I think I figured out how to install 2 modems, Use ENABLE and DISABLE in control panel to select the one I want to use. Let me know if that pastebin works.... That's a handy gadget..... sure beats flooding the newsgroup with all that stuff. Creative Modem Blaster V.92 DE5721 (Win98) Crappy text version of Conexant generic Hayes AT command set http://ask.creative.com/wwenglish/mo...t_conexant.htm A PDF version of the same document, where the Index at the front makes things slightly more bearable. http://www.linuxant.com/drivers/hsf/...F_Released.pdf (703KB) ******* This is from your pastebin, for Win98 ATZ&F AT+IBC=0,0,0,,,,,0;+PCW=2;+PMH=1 ATE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;+GCI=B5;W2 ATS7=90S30=0L3M1+ES=3,0,2;+DS=3; AT+IFC=2,2;BX4 ATDT; ATDT555-1212 AT +IBC ??? - can't find this in the manual +PCW=2 Ignore Call Waiting +PMH=1 Disable Modem Waiting AT E0 disable command echo V1 Enables long-form (verbose) result codes S0=0 disable auto-answer &C1 RLSD follows the state of the carrier &D2 Hang up on falling edge of DTR +MR=2 Enables reporting of modulation connection (+ MCR: and Receive Rate Only: are transmitted) +DR=1 Data compression reporting enabled +ER=1 Error control reporting enabled +GCI=B5 Country of Installation = USA W2 Upon connection, the modem reports the DCE speed AT S7=90 Wait Time For Carrier 90 seconds S30=0 Disconnect Inactivity Timer = disabled L3 Speaker volume HIGH M1 Speaker ON +ES=3,0,2 Original request = Initiate V.42 with Detection Phase Fallback = Initiate call with Direct Mode Answer = Initiate V.42 without Detection Phase +DS=3 Data Compress = V.42bis P0=11 (default compression) AT +IFC=2,2 DTE Hardware flow control, CTS/RTS B ??? - can't find this in the manual X4 CONNECT text when connected... OK, we'll see what kind of a mess that WinXP makes of this. No evidence it's a V92 modem in that capture. Paul
|
|
#13
March 14th 14, 10:17 AM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
On Fri, 14 Mar 2014 04:13:50 -0400, Paul wrote:
OK, we'll see what kind of a mess that WinXP makes of this. No evidence it's a V92 modem in that capture. Paul I planned to do that, and for soem reason, Portmon will NOT capture a log file (or do anything) with that external modem connected. I did connect again, but nothing was saved in Portmon. I used it the same way as before..... I even deleted all the old .log files. I dont know what is going on anymore. I got ****ed off, and jsut shut off the damn XP computer for awhile again. I'm back on Win98, which works! XP is /NOT/ what I expected. I always heard it was plug-n-play for almost everything. Thats surely not true. Win98 is more P n P than XP (at least for modems). The last time I had this much trouble with modems, was back in the early 90's using Win 3.x. I've had Win2000 installed for around 5 years, and after hours and hours of trying, I never could get that to connect properly either. If it wasn't for W2k solving some of my USB connection problems with those external hard drives, I'd delete it from my computer to save drive space. I never even boot to it except for USB needs.
|
|
#14
March 14th 14, 04:58 PM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
|
|
#15
March 14th 14, 11:10 PM
posted to microsoft.public.windowsxp.general
|
|||
|
|||
|
Portmon log for Paul - WIN98 (Part1)
On Fri, 14 Mar 2014 12:58:02 -0400, Paul wrote:
The PortMon 3.02 has a menu to select the COM port to capture. You need to set that, before beginning the capture. As the "other" COM port will be silent. Paul I'll have to check that. I needed a break from damn thing this again. All the time I've spent trying to get this thing to work seems like a total waste at this point. Same **** I've dealt with using Win2000, and could never resolve during 5 years. In fact, after putting the XP machine away, I booted over to Win2000, and went online. During the first 3 minutes, I was able to open some web pages, it got slower and slower, and at about 20 min, I could not get anything. Even my newsreader said "winsock error", yet I was connected. Same **** that XP is doing! (Except using that internal PCTel modem, I can remain connected, but it's very slow.) I'm wondering if this Creative modem is just not suited to Win 2K and XP? Or, maybe none of those NT based OSs are suited to dialup ????? I'll send you that Portmon log, but I dont feel there is any solution anymore. I guess I'm just plain frustrated. I guess I can continue to use W98 for a few more years online, but will have less and less access to the web. I'm thinking more and more about buying an Apple computer. That would be mostly for the internet, while W98 will continue to run my other programs just fine. There dont seem to be many more options. Yea, I know, someone will suggest Linux again..... I dont expect much, I just want an OS that will run newer browsers, and connect at the same speed I get with W98 on dialup. High Speed internet would be nice, but for most uses, my dialup is fine on W98 for my needs. But waiting 20 minutes for one web page to load, and then completely failing is NOT acceptable on XP or W2K. Even if I could only use W2K, I'd be happy, since that allows newer browsers. After all, W2K is mostly the same as XP, minus some things and most of the bloat. I have the SP4 version installed. I have found XP to be a little more user friendly though, once all the bloat is removed.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
