Please help with Auto Complete

I did put Regsvr32 /u RSABase.dll in and hit ok.... It did not work I got the
following error message 'LoadLibrary ('RSABase.dll") failed - The specified
module could not be found.


"JS" wrote:

In step 2 of method #3
Start/Run and enter: Regsvr32 /u RSABase.dll

Note there should be space between:
Regsvr32 and the /u and the RSABase.dll

If you entered: Regsvr32 /u RSABase.dll
correctly the following RegSvr32 message should appear:
"DllUnregisterServer in RSABase.dll succeeded."

Click OK.

Then complete the remaining part of the instructions in
method #3 as listed below.

Click Start, and then click Run.
In the Open box, type: Regsvr32 RSABase.dll
and then click OK.

The following RegSvr32 message appears:
"DllRegisterServer in RSABase.dll succeeded. "
Click OK.

Restart Internet Explorer, and then determine if the problem is fixed.
If the problem is not fixed, proceed to the next method.

JS
http://www.pagestart.com


"MarianElecta" wrote in message
...
Okay thank you it seems my restore is fixed but I am still left with the
auto
complete problem. I tried the instructions of 'AutoComplete Does Not Save
Username and Password' and when I got to Method 3: I tried to run it and
it
gave me the message that it couldn't find Regsvr32/u file. I don't know
what
to do about it and I sure miss it as I enter a lot of programs that
require
Username and Password and I have to type it everytime. I would appreciate
any thing else you can suggest. I did try everything that was suggested
and
I appreciate everything.

"JS" wrote:

It would appear that your restore points are corrupted.
See this article on how to reset System Resto
http://www.theeldergeek.com/system_r...unctioning.htm

Now as to your original problem, getting System Restore to function
properly will not fix that. Did you try the suggestions that Kelly
posted on 11/26/2008 at 9:28 PM ?

JS
http://www.pagestart.com


"MarianElecta" wrote in message
...
Yes that is the message i get but it says the "date I picked to
restore'
instead of and earlier restore point.

"JS" wrote:

Is this the exact error message:
"Cannot restore the computer to an earlier restore
point, no changes have been made to your computer"

Or is it one of these errors:
http://bertk.mvps.org/html/error.html

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
It doesn't give me an error message.... it just says cannot restore
this
date. I even went clear back to Oct. I tried all the dates in
Nov...
etc..
I don't know why it doesn't restore.

"JS" wrote:

What is the actual error message you get when you
use System Restore?

Also what is the earliest System Restore date you
still can choose from the calendar?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
JS i tried to restore and it wiil not restore. i tried about 12
different
days and everyone of them said could not restore. I went ahead
and
downloaded Internet Explorer 8 and is no help there ( inf fact I
have
more
problems).... wow this is a mess and I don't know what to do.

"JS" wrote:

System Restore.
"How to restore Windows XP to a previous state"
http://support.microsoft.com/kb/306084

Follow the instructions in the above article,
pick a "Restore Point" that is dated before today's
date or a date before when the problem first started.

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
I used this file and now i am NO longer even asked it I want to
save
passwords. It seems like the last change that microsoft
automatically
did,
after this I NO longer had this feature where it will save my
passwords....
etc. This disappoints me as I used this feature quite often.
Is
there
anything else I can do?

"JS" wrote:

"AutoComplete Mode Enabled or Disabled - Entry/Line #37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta" wrote
in
message
...
I am so sorry i know you are trying to help me.... but I
canNOT
find
anything
that has 36. or 37 in it. i do not see it on any web page

"JS" wrote:

36. Recover and Restore Deleted Files User Profile
Hive
Cleanup
Service
37. Clear Form Fields in AutoComplete AutoComplete
Mode
Enabled
or
Disabled ---- This one

JS

"MarianElecta"
wrote
in
message
...
Please tell me where #37 is as I cannot find it. Thank
you
for
your
help

"JS" wrote:

If you are using AutoComplete to fill in web based
forms
then line #37, right hand column of the web page has
two
download options "Enabled" or "Disabled", click on the
word "Enabled" and 'Run' the file. This will unlock(re
enable)
auto completion.

JS



"MarianElecta"
wrote
in
message
...
I don't understand what you are trying to tell me to
do....
so
sorry

"JS" wrote:

Try this and see if AutoComplete functions
"AutoComplete Mode Enabled or Disabled - Entry #37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"

wrote
in
message
...
Please it seems like when the last update was put
on
Windows
XP
that
my
auto
complete does NOT work anymore. I have tried
everything.
I
went
into
tools:interetoptions:content and then into auto
complete
settings
and
it
is
clicked to prompt me for use.... but it does not
work.
I
am
really
at
a
stand still to know what to do next.
Marian

What version of Internet Explorer are you running?
IE6, IE7 or IE8 Beta

JS
http://www.pagestart.com


"MarianElecta" wrote in message
news
I did put Regsvr32 /u RSABase.dll in and hit ok.... It did not work I got
the
following error message 'LoadLibrary ('RSABase.dll") failed - The
specified
module could not be found.


"JS" wrote:

In step 2 of method #3
Start/Run and enter: Regsvr32 /u RSABase.dll

Note there should be space between:
Regsvr32 and the /u and the RSABase.dll

If you entered: Regsvr32 /u RSABase.dll
correctly the following RegSvr32 message should appear:
"DllUnregisterServer in RSABase.dll succeeded."

Click OK.

Then complete the remaining part of the instructions in
method #3 as listed below.

Click Start, and then click Run.
In the Open box, type: Regsvr32 RSABase.dll
and then click OK.

The following RegSvr32 message appears:
"DllRegisterServer in RSABase.dll succeeded. "
Click OK.

Restart Internet Explorer, and then determine if the problem is fixed.
If the problem is not fixed, proceed to the next method.

JS
http://www.pagestart.com


"MarianElecta" wrote in message
...
Okay thank you it seems my restore is fixed but I am still left with
the
auto
complete problem. I tried the instructions of 'AutoComplete Does Not
Save
Username and Password' and when I got to Method 3: I tried to run it
and
it
gave me the message that it couldn't find Regsvr32/u file. I don't
know
what
to do about it and I sure miss it as I enter a lot of programs that
require
Username and Password and I have to type it everytime. I would
appreciate
any thing else you can suggest. I did try everything that was
suggested
and
I appreciate everything.

"JS" wrote:

It would appear that your restore points are corrupted.
See this article on how to reset System Resto
http://www.theeldergeek.com/system_r...unctioning.htm

Now as to your original problem, getting System Restore to function
properly will not fix that. Did you try the suggestions that Kelly
posted on 11/26/2008 at 9:28 PM ?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
Yes that is the message i get but it says the "date I picked to
restore'
instead of and earlier restore point.

"JS" wrote:

Is this the exact error message:
"Cannot restore the computer to an earlier restore
point, no changes have been made to your computer"

Or is it one of these errors:
http://bertk.mvps.org/html/error.html

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
It doesn't give me an error message.... it just says cannot
restore
this
date. I even went clear back to Oct. I tried all the dates in
Nov...
etc..
I don't know why it doesn't restore.

"JS" wrote:

What is the actual error message you get when you
use System Restore?

Also what is the earliest System Restore date you
still can choose from the calendar?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
JS i tried to restore and it wiil not restore. i tried about
12
different
days and everyone of them said could not restore. I went
ahead
and
downloaded Internet Explorer 8 and is no help there ( inf fact
I
have
more
problems).... wow this is a mess and I don't know what to do.

"JS" wrote:

System Restore.
"How to restore Windows XP to a previous state"
http://support.microsoft.com/kb/306084

Follow the instructions in the above article,
pick a "Restore Point" that is dated before today's
date or a date before when the problem first started.

JS
http://www.pagestart.com


"MarianElecta" wrote
in
message
...
I used this file and now i am NO longer even asked it I want
to
save
passwords. It seems like the last change that microsoft
automatically
did,
after this I NO longer had this feature where it will save
my
passwords....
etc. This disappoints me as I used this feature quite
often.
Is
there
anything else I can do?

"JS" wrote:

"AutoComplete Mode Enabled or Disabled - Entry/Line #37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"
wrote
in
message
...
I am so sorry i know you are trying to help me.... but I
canNOT
find
anything
that has 36. or 37 in it. i do not see it on any web
page

"JS" wrote:

36. Recover and Restore Deleted Files User
Profile
Hive
Cleanup
Service
37. Clear Form Fields in AutoComplete AutoComplete
Mode
Enabled
or
Disabled ---- This one

JS

"MarianElecta"
wrote
in
message
...
Please tell me where #37 is as I cannot find it.
Thank
you
for
your
help

"JS" wrote:

If you are using AutoComplete to fill in web based
forms
then line #37, right hand column of the web page has
two
download options "Enabled" or "Disabled", click on
the
word "Enabled" and 'Run' the file. This will
unlock(re
enable)
auto completion.

JS



"MarianElecta"

wrote
in
message
...
I don't understand what you are trying to tell me
to
do....
so
sorry

"JS" wrote:

Try this and see if AutoComplete functions
"AutoComplete Mode Enabled or Disabled - Entry
#37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"

wrote
in
message
...
Please it seems like when the last update was
put
on
Windows
XP
that
my
auto
complete does NOT work anymore. I have tried
everything.
I
went
into
tools:interetoptions:content and then into auto
complete
settings
and
it
is
clicked to prompt me for use.... but it does
not
work.
I
am
really
at
a
stand still to know what to do next.
Marian

I downloaded internet explorer 8.... i thought it might fix my problems

"JS" wrote:

What version of Internet Explorer are you running?
IE6, IE7 or IE8 Beta

JS
http://www.pagestart.com


"MarianElecta" wrote in message
news
I did put Regsvr32 /u RSABase.dll in and hit ok.... It did not work I got
the
following error message 'LoadLibrary ('RSABase.dll") failed - The
specified
module could not be found.


"JS" wrote:

In step 2 of method #3
Start/Run and enter: Regsvr32 /u RSABase.dll

Note there should be space between:
Regsvr32 and the /u and the RSABase.dll

If you entered: Regsvr32 /u RSABase.dll
correctly the following RegSvr32 message should appear:
"DllUnregisterServer in RSABase.dll succeeded."

Click OK.

Then complete the remaining part of the instructions in
method #3 as listed below.

Click Start, and then click Run.
In the Open box, type: Regsvr32 RSABase.dll
and then click OK.

The following RegSvr32 message appears:
"DllRegisterServer in RSABase.dll succeeded. "
Click OK.

Restart Internet Explorer, and then determine if the problem is fixed.
If the problem is not fixed, proceed to the next method.

JS
http://www.pagestart.com


"MarianElecta" wrote in message
...
Okay thank you it seems my restore is fixed but I am still left with
the
auto
complete problem. I tried the instructions of 'AutoComplete Does Not
Save
Username and Password' and when I got to Method 3: I tried to run it
and
it
gave me the message that it couldn't find Regsvr32/u file. I don't
know
what
to do about it and I sure miss it as I enter a lot of programs that
require
Username and Password and I have to type it everytime. I would
appreciate
any thing else you can suggest. I did try everything that was
suggested
and
I appreciate everything.

"JS" wrote:

It would appear that your restore points are corrupted.
See this article on how to reset System Resto
http://www.theeldergeek.com/system_r...unctioning.htm

Now as to your original problem, getting System Restore to function
properly will not fix that. Did you try the suggestions that Kelly
posted on 11/26/2008 at 9:28 PM ?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
Yes that is the message i get but it says the "date I picked to
restore'
instead of and earlier restore point.

"JS" wrote:

Is this the exact error message:
"Cannot restore the computer to an earlier restore
point, no changes have been made to your computer"

Or is it one of these errors:
http://bertk.mvps.org/html/error.html

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
It doesn't give me an error message.... it just says cannot
restore
this
date. I even went clear back to Oct. I tried all the dates in
Nov...
etc..
I don't know why it doesn't restore.

"JS" wrote:

What is the actual error message you get when you
use System Restore?

Also what is the earliest System Restore date you
still can choose from the calendar?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
JS i tried to restore and it wiil not restore. i tried about
12
different
days and everyone of them said could not restore. I went
ahead
and
downloaded Internet Explorer 8 and is no help there ( inf fact
I
have
more
problems).... wow this is a mess and I don't know what to do.

"JS" wrote:

System Restore.
"How to restore Windows XP to a previous state"
http://support.microsoft.com/kb/306084

Follow the instructions in the above article,
pick a "Restore Point" that is dated before today's
date or a date before when the problem first started.

JS
http://www.pagestart.com


"MarianElecta" wrote
in
message
...
I used this file and now i am NO longer even asked it I want
to
save
passwords. It seems like the last change that microsoft
automatically
did,
after this I NO longer had this feature where it will save
my
passwords....
etc. This disappoints me as I used this feature quite
often.
Is
there
anything else I can do?

"JS" wrote:

"AutoComplete Mode Enabled or Disabled - Entry/Line #37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"
wrote
in
message
...
I am so sorry i know you are trying to help me.... but I
canNOT
find
anything
that has 36. or 37 in it. i do not see it on any web
page

"JS" wrote:

36. Recover and Restore Deleted Files User
Profile
Hive
Cleanup
Service
37. Clear Form Fields in AutoComplete AutoComplete
Mode
Enabled
or
Disabled ---- This one

JS

"MarianElecta"
wrote
in
message
...
Please tell me where #37 is as I cannot find it.
Thank
you
for
your
help

"JS" wrote:

If you are using AutoComplete to fill in web based
forms
then line #37, right hand column of the web page has
two
download options "Enabled" or "Disabled", click on
the
word "Enabled" and 'Run' the file. This will
unlock(re
enable)
auto completion.

JS



"MarianElecta"

wrote
in
message
...
I don't understand what you are trying to tell me
to
do....
so
sorry

"JS" wrote:

Try this and see if AutoComplete functions
"AutoComplete Mode Enabled or Disabled - Entry
#37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"

wrote
in
message
...
Please it seems like when the last update was
put
on
Windows
XP
that
my
auto
complete does NOT work anymore. I have tried
everything.
I
went
into
tools:interetoptions:content and then into auto
complete
settings
and
it
is
clicked to prompt me for use.... but it does
not
work.
I
am
really
at
a
stand still to know what to do next.
Marian

IE8 is still a BETA product and has bugs,
I don't know if autocomplete works or not when using IE8.

I suggest you post your problem to the IE8 group named:
microsoft.public.internetexplorer.beta

Tell them your problem, what version of IE you are
currently using (IE*), what version of IE your where using
when the problem first started.

They may be able to help you or they may suggest
you uninstall IE8 and use IE7 or IE6.

Good luck, sorry but I have no IE8 experience.

JS
http://www.pagestart.com


"MarianElecta" wrote in message
...
I downloaded internet explorer 8.... i thought it might fix my problems

"JS" wrote:

What version of Internet Explorer are you running?
IE6, IE7 or IE8 Beta

JS
http://www.pagestart.com


"MarianElecta" wrote in message
news
I did put Regsvr32 /u RSABase.dll in and hit ok.... It did not work I
got
the
following error message 'LoadLibrary ('RSABase.dll") failed - The
specified
module could not be found.


"JS" wrote:

In step 2 of method #3
Start/Run and enter: Regsvr32 /u RSABase.dll

Note there should be space between:
Regsvr32 and the /u and the RSABase.dll

If you entered: Regsvr32 /u RSABase.dll
correctly the following RegSvr32 message should appear:
"DllUnregisterServer in RSABase.dll succeeded."

Click OK.

Then complete the remaining part of the instructions in
method #3 as listed below.

Click Start, and then click Run.
In the Open box, type: Regsvr32 RSABase.dll
and then click OK.

The following RegSvr32 message appears:
"DllRegisterServer in RSABase.dll succeeded. "
Click OK.

Restart Internet Explorer, and then determine if the problem is fixed.
If the problem is not fixed, proceed to the next method.

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
Okay thank you it seems my restore is fixed but I am still left with
the
auto
complete problem. I tried the instructions of 'AutoComplete Does
Not
Save
Username and Password' and when I got to Method 3: I tried to run it
and
it
gave me the message that it couldn't find Regsvr32/u file. I don't
know
what
to do about it and I sure miss it as I enter a lot of programs that
require
Username and Password and I have to type it everytime. I would
appreciate
any thing else you can suggest. I did try everything that was
suggested
and
I appreciate everything.

"JS" wrote:

It would appear that your restore points are corrupted.
See this article on how to reset System Resto
http://www.theeldergeek.com/system_r...unctioning.htm

Now as to your original problem, getting System Restore to function
properly will not fix that. Did you try the suggestions that Kelly
posted on 11/26/2008 at 9:28 PM ?

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
Yes that is the message i get but it says the "date I picked to
restore'
instead of and earlier restore point.

"JS" wrote:

Is this the exact error message:
"Cannot restore the computer to an earlier restore
point, no changes have been made to your computer"

Or is it one of these errors:
http://bertk.mvps.org/html/error.html

JS
http://www.pagestart.com


"MarianElecta" wrote in
message
...
It doesn't give me an error message.... it just says cannot
restore
this
date. I even went clear back to Oct. I tried all the dates
in
Nov...
etc..
I don't know why it doesn't restore.

"JS" wrote:

What is the actual error message you get when you
use System Restore?

Also what is the earliest System Restore date you
still can choose from the calendar?

JS
http://www.pagestart.com


"MarianElecta" wrote
in
message
...
JS i tried to restore and it wiil not restore. i tried
about
12
different
days and everyone of them said could not restore. I went
ahead
and
downloaded Internet Explorer 8 and is no help there ( inf
fact
I
have
more
problems).... wow this is a mess and I don't know what to
do.

"JS" wrote:

System Restore.
"How to restore Windows XP to a previous state"
http://support.microsoft.com/kb/306084

Follow the instructions in the above article,
pick a "Restore Point" that is dated before today's
date or a date before when the problem first started.

JS
http://www.pagestart.com


"MarianElecta"
wrote
in
message
...
I used this file and now i am NO longer even asked it I
want
to
save
passwords. It seems like the last change that microsoft
automatically
did,
after this I NO longer had this feature where it will
save
my
passwords....
etc. This disappoints me as I used this feature quite
often.
Is
there
anything else I can do?

"JS" wrote:

"AutoComplete Mode Enabled or Disabled - Entry/Line
#37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"
wrote
in
message
...
I am so sorry i know you are trying to help me.... but
I
canNOT
find
anything
that has 36. or 37 in it. i do not see it on any web
page

"JS" wrote:

36. Recover and Restore Deleted Files User
Profile
Hive
Cleanup
Service
37. Clear Form Fields in AutoComplete
AutoComplete
Mode
Enabled
or
Disabled ---- This one

JS

"MarianElecta"

wrote
in
message
...
Please tell me where #37 is as I cannot find it.
Thank
you
for
your
help

"JS" wrote:

If you are using AutoComplete to fill in web
based
forms
then line #37, right hand column of the web page
has
two
download options "Enabled" or "Disabled", click
on
the
word "Enabled" and 'Run' the file. This will
unlock(re
enable)
auto completion.

JS



"MarianElecta"

wrote
in
message
...
I don't understand what you are trying to tell
me
to
do....
so
sorry

"JS" wrote:

Try this and see if AutoComplete functions
"AutoComplete Mode Enabled or Disabled - Entry
#37"
http://www.kellys-korner-xp.com/xp_tweaks.htm

JS
http://www.pagestart.com


"MarianElecta"

wrote
in
message
...
Please it seems like when the last update
was
put
on
Windows
XP
that
my
auto
complete does NOT work anymore. I have
tried
everything.
I
went
into
tools:interetoptions:content and then into
auto
complete
settings
and
it
is
clicked to prompt me for use.... but it does
not
work.
I
am
really
at
a
stand still to know what to do next.
Marian