If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Wifi status
Hi everyone
Just got connected (less than 1 hour) and Wifi Status says wifi duration is 7 days and 11 hours. Router and PC were offline. Is this a Windows 8.1 error? Thank you. |
Ads |
#2
|
|||
|
|||
Wifi status
On 6/19/2014 3:28 PM, Jon wrote:
Hi everyone Just got connected (less than 1 hour) and Wifi Status says wifi duration is 7 days and 11 hours. Router and PC were offline. Is this a Windows 8.1 error? Thank you. Not much to go on, here, but WiFi status is logged by the device, not your computer. I suspect that your WiFi router thinks it's been active, regardless of whether the computer was being used. -- best regards, Neil |
#3
|
|||
|
|||
Wifi status
On 6/21/2014 5:16 AM, Jon wrote:
When you do restart, Wifi duration starts normally from zero. It means Windows 8.1 hibrid shutdown doesn't really close windows. Or better, session stays in memory like on an hibernation. Restarting the *computer* normally has no effect the WiFi router, since most folks don't do such things by switching off the power strip that both are connected to. ;-) The up-time for the router is logged by the router, not your computer, regardless of the OS. -- best regards, Neil |
#4
|
|||
|
|||
Wifi status
On 6/21/2014 11:34 AM, Neil wrote:
On 6/21/2014 5:16 AM, Jon wrote: When you do restart, Wifi duration starts normally from zero. It means Windows 8.1 hibrid shutdown doesn't really close windows. Or better, session stays in memory like on an hibernation. Restarting the *computer* normally has no effect the WiFi router, since most folks don't do such things by switching off the power strip that both are connected to. ;-) The up-time for the router is logged by the router, not your computer, regardless of the OS. In addition, just to complicate things - - Many of the newer P/C's have limited housekeeping voltages present as long as the P/C is connected to A/C power. This allows such things as turn on from a PS/2 port keyboard, and charging USB connected devices, such as cell phones. Sadly, turn on from a USB connected keyboard is still iffy. The Ethernet adapter and/or a WiFi adapter may remain powered, if not fully functional. As a result, a router may still see them, even though he P/C is "Shut Down". |
#5
|
|||
|
|||
Wifi status
charlie wrote:
On 6/21/2014 11:34 AM, Neil wrote: On 6/21/2014 5:16 AM, Jon wrote: When you do restart, Wifi duration starts normally from zero. It means Windows 8.1 hibrid shutdown doesn't really close windows. Or better, session stays in memory like on an hibernation. Restarting the *computer* normally has no effect the WiFi router, since most folks don't do such things by switching off the power strip that both are connected to. ;-) The up-time for the router is logged by the router, not your computer, regardless of the OS. In addition, just to complicate things - - Many of the newer P/C's have limited housekeeping voltages present as long as the P/C is connected to A/C power. This allows such things as turn on from a PS/2 port keyboard, and charging USB connected devices, such as cell phones. Sadly, turn on from a USB connected keyboard is still iffy. The Ethernet adapter and/or a WiFi adapter may remain powered, if not fully functional. As a result, a router may still see them, even though he P/C is "Shut Down". As far as I know, the housekeeping voltage remains the same. It is called +5VSB, and can be regulated down to other voltages on the motherboard. A lot of stuff is powered from that, and it's a wonder the ATX supply has enough current for everything we throw at it (like charging your iPad while the computer sleeps). Before charging things became so popular, motherboard +5VSB was using around 1 amp or so, out of 2 to 3 amps the supply had to offer. The supply provides this power, without the fan spinning, so the supply is relying on convection cooling of that source. +5VSB can be used to power the PS/2 ports and the USB ports. As long as PME (Power Management Event) is enabled in the BIOS, things are set up so that "wake" events from things like keyboard or mice, can be forwarded to the chipset. There's no particular reason for USB to be flaky. I think some PS/2 keyboards, the SuperI/O can be programmed to look for multiple key presses, which may give the appearance the keyboard is not responsive. In which case you'd check the BIOS to make sure it isn't set to one of the more obscure wake conditions. I don't recollect the USB path being quite that fancy. Paul |
Thread Tools | |
Display Modes | Rate This Thread |
|
|