Strange network connection issue

This is on an Acer laptop and is the only device on the network with a
problem connecting.

When I attempt to map a drive (net use) I get "System Error 53 has
occurred". If I attempt to connect from the run box using the UNC OR IP I
get "The network path was not found".

Now the strange part: I can ping IP or UNC just fine.

I have Repaired Windows from a cd, reinstalled SP3, IE7 and made sure I had
the latest Realtek drivers for the nic.

Any suggestions besides a clean install?

Hi
Make sure that the Acer is on the same Workgroup as the other computers and
that sharing setting is configured correctly.
In general.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Vista File and Printer Sharing-
http://technet.microsoft.com/en-us/l.../bb727037.aspx
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Windows XP patch for Sharing with Vista (Not need for XP-SP3) -
http://support.microsoft.com/kb/922120
Sharing between Windows XP and Mac -
http://www.realifewebdesigns.com/web...file-share.asp
Jack (MVP-Networking).

"Computer Rick" Computer wrote in message
...
This is on an Acer laptop and is the only device on the network with a
problem connecting.

When I attempt to map a drive (net use) I get "System Error 53 has
occurred". If I attempt to connect from the run box using the UNC OR IP I
get "The network path was not found".

Now the strange part: I can ping IP or UNC just fine.

I have Repaired Windows from a cd, reinstalled SP3, IE7 and made sure I
had
the latest Realtek drivers for the nic.

Any suggestions besides a clean install?

Hi
Make sure that the Acer is on the same Workgroup as the other computers and
that sharing setting is configured correctly.
In general.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Vista File and Printer Sharing-
http://technet.microsoft.com/en-us/l.../bb727037.aspx
Windows XP File Sharing -
http://support.microsoft.com/default...b;en-us;304040
http://support.microsoft.com/default...b;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/u...utt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Windows XP patch for Sharing with Vista (Not need for XP-SP3) -
http://support.microsoft.com/kb/922120
Sharing between Windows XP and Mac -
http://www.realifewebdesigns.com/web...file-share.asp
Jack (MVP-Networking).

"Computer Rick" Computer wrote in message
...
This is on an Acer laptop and is the only device on the network with a
problem connecting.

When I attempt to map a drive (net use) I get "System Error 53 has
occurred". If I attempt to connect from the run box using the UNC OR IP I
get "The network path was not found".

Now the strange part: I can ping IP or UNC just fine.

I have Repaired Windows from a cd, reinstalled SP3, IE7 and made sure I
had
the latest Realtek drivers for the nic.

Any suggestions besides a clean install?