A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows 7 » Windows 7 Forum
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Can I use a remote printer driver locally?



 
 
Thread Tools Rate Thread Display Modes
  #1  
Old May 17th 18, 11:16 AM posted to alt.windows7.general
mike[_10_]
external usenet poster
 
Posts: 998
Default Can I use a remote printer driver locally?

I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

I'd like to decommission the XP OS and move up to win7.
Can't find any drivers for the Citizen 120D.
The generic win7 driver prints garbage.
I'm not sure I ever had any drivers for XP; the OS
finds and installs them.

I set up the XP printer as networked.
Now, I can run word on the win7 machine and use the
networked Citizen 120D on XP to print.
That's better, but still doesn't get rid of the
XP machine.

When I setup the remote printer on the win7 machine,
it says it's installing a driver for the printer.
Is there a way to use that driver for local printing
from the win7 machine to the Citizen 120D plugged into
the parallel port of the win7 machine?

On the XP machine, I used double driver to backup the drivers.
There's a directory for printers, but the only thing in there
is the Dymo label printer that I manually installed.
Printers automatically installed by windows don't show up.
Yes, I backed up ALL the drivers.

After some googling,
I found cit9us.drv which is supposed to be the driver,
but maybe for win95.
I don't know where to stick it ;-) Printer drivers
seem to use a whole other mechanism to install.

Is there any way to get this dot matrix printer to work
on a win7...and later win10 machine?
Ads
  #2  
Old May 17th 18, 12:39 PM posted to alt.windows7.general
SC Tom[_3_]
external usenet poster
 
Posts: 3,956
Default Can I use a remote printer driver locally?



"mike" wrote in message
news
I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

I'd like to decommission the XP OS and move up to win7.
Can't find any drivers for the Citizen 120D.
The generic win7 driver prints garbage.
I'm not sure I ever had any drivers for XP; the OS
finds and installs them.

I set up the XP printer as networked.
Now, I can run word on the win7 machine and use the
networked Citizen 120D on XP to print.
That's better, but still doesn't get rid of the
XP machine.

When I setup the remote printer on the win7 machine,
it says it's installing a driver for the printer.
Is there a way to use that driver for local printing
from the win7 machine to the Citizen 120D plugged into
the parallel port of the win7 machine?

On the XP machine, I used double driver to backup the drivers.
There's a directory for printers, but the only thing in there
is the Dymo label printer that I manually installed.
Printers automatically installed by windows don't show up.
Yes, I backed up ALL the drivers.

After some googling,
I found cit9us.drv which is supposed to be the driver,
but maybe for win95.
I don't know where to stick it ;-) Printer drivers
seem to use a whole other mechanism to install.

Is there any way to get this dot matrix printer to work
on a win7...and later win10 machine?


You might try the driver from he
http://www.catalog.update.microsoft.com/Search.aspx?q=citizen%20120D
--

SC Tom


  #3  
Old May 17th 18, 05:31 PM posted to alt.windows7.general
GlowingBlueMist[_6_]
external usenet poster
 
Posts: 316
Default Can I use a remote printer driver locally?

On 5/17/2018 5:16 AM, mike wrote:
I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

I'd like to decommission the XP OS and move up to win7.
Can't find any drivers for the Citizen 120D.
The generic win7 driver prints garbage.
I'm not sure I ever had any drivers for XP; the OS
finds and installs them.

I set up the XP printer as networked.
Now, I can run word on the win7 machine and use the
networked Citizen 120D on XP to print.
That's better, but still doesn't get rid of the
XP machine.

When I setup the remote printer on the win7 machine,
it says it's installing a driver for the printer.
Is there a way to use that driver for local printing
from the win7 machine to the Citizen 120D plugged into
the parallel port of the win7 machine?

On the XP machine, I used double driver to backup the drivers.
There's a directory for printers, but the only thing in there
is the Dymo label printer that I manually installed.
Printers automatically installed by windows don't show up.
Yes, I* backed up ALL the drivers.

After some googling,
I found cit9us.drv which is supposed to be the driver,
but maybe for win95.
I don't know where to stick it ;-)* Printer drivers
seem to use a whole other mechanism to install.

Is there any way to get this dot matrix printer to work
on a win7...and later win10 machine?

When the PC asks for the printer model try telling it it's not there.
Then when given the chance tell Windows to update the list of printers.
I just did that on my Windows 10/1803 system. With out the update it
did not display ANY Citizen printers but after the update, which can
take quite a while, as in 10 min to hours, it found a list of Citizen
printers. One of which was the 120D+.

I'm thinking if Windows 10 can find drivers for it that surely your Win7
machine should be able to find a Citizen 120D driver after the driver
list is updated.
  #4  
Old May 18th 18, 12:11 AM posted to alt.windows7.general
mike[_10_]
external usenet poster
 
Posts: 998
Default Can I use a remote printer driver locally?

On 5/17/2018 5:26 AM, Wolf K wrote:
On 2018-05-17 06:16, mike wrote:
I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

I'd like to decommission the XP OS and move up to win7.
Can't find any drivers for the Citizen 120D.
The generic win7 driver prints garbage.
I'm not sure I ever had any drivers for XP; the OS
finds and installs them.

I set up the XP printer as networked.
Now, I can run word on the win7 machine and use the
networked Citizen 120D on XP to print.
That's better, but still doesn't get rid of the
XP machine. [...]


Well, I know you didn't ask about this, but IMO using the XP machine as
a dedicated printer server would be a good use for it. Until the
hardware gives up, that is. In The Olden Days, using one machine on a
network as the printer server was common practice.

Best,

It's all about space to put it.
  #5  
Old May 18th 18, 12:14 AM posted to alt.windows7.general
mike[_10_]
external usenet poster
 
Posts: 998
Default Can I use a remote printer driver locally?

On 5/17/2018 4:39 AM, SC Tom wrote:


"mike" wrote in message
news
I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

I'd like to decommission the XP OS and move up to win7.
Can't find any drivers for the Citizen 120D.
The generic win7 driver prints garbage.
I'm not sure I ever had any drivers for XP; the OS
finds and installs them.

I set up the XP printer as networked.
Now, I can run word on the win7 machine and use the
networked Citizen 120D on XP to print.
That's better, but still doesn't get rid of the
XP machine.

When I setup the remote printer on the win7 machine,
it says it's installing a driver for the printer.
Is there a way to use that driver for local printing
from the win7 machine to the Citizen 120D plugged into
the parallel port of the win7 machine?

On the XP machine, I used double driver to backup the drivers.
There's a directory for printers, but the only thing in there
is the Dymo label printer that I manually installed.
Printers automatically installed by windows don't show up.
Yes, I backed up ALL the drivers.

After some googling,
I found cit9us.drv which is supposed to be the driver,
but maybe for win95.
I don't know where to stick it ;-) Printer drivers
seem to use a whole other mechanism to install.

Is there any way to get this dot matrix printer to work
on a win7...and later win10 machine?


You might try the driver from he
http://www.catalog.update.microsoft.com/Search.aspx?q=citizen%20120D


Thanks for the tutorial. I'd forgotten about that path.
Sometimes I even forget whether I put my shoes on...
Don't get old...it sucks.

  #6  
Old May 18th 18, 01:42 AM posted to alt.windows7.general
mike[_10_]
external usenet poster
 
Posts: 998
Default Can I use a remote printer driver locally?

On 5/17/2018 4:39 AM, SC Tom wrote:


"mike" wrote in message
news
I have a Citizen 120D dot-matrix printer dedicated
as a label printer.
I use windows XP with Word 2000 and the Avery template.
Works fine.

snip

You might try the driver from he
http://www.catalog.update.microsoft.com/Search.aspx?q=citizen%20120D

Win7 pro sp1 32-bit

I downloaded the i386 version and unpacked the cab file.
Tried to install the .inf file but that method is not supported.
Went to devices and printers and pointed it at the unpacked cab file.
Installed the driver.
Test page printed properly.
If I try to print from word, the printer shows up in the printer
selection box and prints ok.

BUT

There is no icon in devices and printers for the Citizen 120D.
I rebooted justincase. NO change.
I reinstalled it again. Still no icons.
The registry has entries for the 120D and the 120D+ in several keys.

I installed a different printer that was in the list.
It does get an icon.

I backed it all out by restoring the restore point and reinstalled
the driver only once.

The situation is not an emergency, but would be nice to be able
to delete/modify the printer if I ever needed it.

In a separate experiment, I allowed devices and printers to update
the list of supported printers. I waited and waited and waited.
Finally it complained that it could not download the list.

I had turned off updates years ago. It may be that some intermediate
update was required for the driver download to work. I turned updates
back on and there are over a hundred pending.
The devices and printers list download option still fails.
I'd rather not install
all those just to see if it makes the printer icon appear.

It's always something...

  #7  
Old May 18th 18, 11:28 AM posted to alt.windows7.general
Ammammata
external usenet poster
 
Posts: 162
Default Can I use a remote printer driver locally?

Il giorno Fri 18 May 2018 01:11:01a, *mike* ha inviato su
alt.windows7.general il messaggio news cosa ha scritto:

Well, I know you didn't ask about this, but IMO using the XP machine as
a dedicated printer server would be a good use for it. Until the
hardware gives up, that is. In The Olden Days, using one machine on a
network as the printer server was common practice.

Best,

It's all about space to put it.


if w7 is professional you can try with xp-mode to run the "printer server"
it occupies just resources but not physical space

--
/-\ /\/\ /\/\ /-\ /\/\ /\/\ /-\ T /-\
-=- -=- -=- -=- -=- -=- -=- -=- - -=-
http://www.bb2002.it

............ [ al lavoro ] ...........
 




Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off






All times are GMT +1. The time now is 01:29 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 PCbanter.
The comments are property of their posters.