|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
#1
June 7th 04, 03:46 PM
|
|||
|
|||
my computer is not recognizing the usb ports
I have recently upgraded from Windows ME to XP and my PDA
and digital camera can't connect to my computer. When I check device manager I notice that the USB controller is not there. It should be under "other devices" but there is no such place. HELP! 
|
| Ads |
|
#2
June 7th 04, 03:46 PM
|
|||
|
|||
|
my computer is not recognizing the usb ports
Hello
what ever drivers for your usn device you have currently installed remove them. Also make sure that you have the correct updated version for xp for your palm installed. another thing doa wndows update and see if you have any penting issue. al luis wrote: I have recently upgraded from Windows ME to XP and my PDA and digital camera can't connect to my computer. When I check device manager I notice that the USB controller is not there. It should be under "other devices" but there is no such place. HELP!
|
|
#3
June 7th 04, 03:46 PM
|
|||
|
|||
|
my computer is not recognizing the usb ports
USB controller should not be under "Other devices". It should appear under
"USB" Install you chipset drivers and if the chipset is based on a VIA chipset, install the VIA USB filter. "luis" wrote in message ... I have recently upgraded from Windows ME to XP and my PDA and digital camera can't connect to my computer. When I check device manager I notice that the USB controller is not there. It should be under "other devices" but there is no such place. HELP!
|
|
#4
July 21st 04, 06:23 PM
|
|||
|
|||
|
usb ports
Load the software and drivers.. hook up the printer to the USB port.. if
your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#5
July 21st 04, 07:16 PM
|
|||
|
|||
|
usb ports
Load the software and drivers.. hook up the printer to the USB port.. if
your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#6
July 21st 04, 09:45 PM
|
|||
|
|||
|
usb ports
SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0
port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#7
July 21st 04, 09:58 PM
|
|||
|
|||
|
usb ports
SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0
port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#8
July 22nd 04, 06:01 PM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#9
July 22nd 04, 06:01 PM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#10
July 22nd 04, 06:01 PM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#11
July 22nd 04, 06:01 PM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#12
July 23rd 04, 12:16 AM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#13
July 23rd 04, 12:29 AM
|
|||
|
|||
|
usb ports
Have you tried to find anything other than a USB 2.0 card recently?
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#14
July 23rd 04, 12:34 AM
|
|||
|
|||
|
usb ports
SP1 is for XP; the OP has ME.
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
#15
July 23rd 04, 12:45 AM
|
|||
|
|||
|
usb ports
SP1 is for XP; the OP has ME.
"Yves Leclerc" wrote in message ... SP1a is only required in order to activate USB 2.0 ports. USB 1.1 and 1.0 port drivers are already in XP. "Mike" wrote in message ... Load the software and drivers.. hook up the printer to the USB port.. if your computer does not have physical USB ports, buy a USB card and install it.. you will need to install SP1a if you haven't already.. "teresa hodder" wrote in message ... i have a usb printer but in windows me there is no usb port to configure it to.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
