If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I do not have access to the folder a:\
When I try to save a "Word" document to the "A" drive I get the following:
"The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
Ads |
#2
|
|||
|
|||
I do not have access to the folder a:\
If the A drive is a CD or DVD drive...
quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#3
|
|||
|
|||
I do not have access to the folder a:\
Typically "A" is assigned by the BIOS to floppy drives. Do you have a floppy
drive? -- Harry Ohrn MS-MVP [Shell\User] www.webtree.ca/windowsxp "333MBI" wrote in message ... When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#4
|
|||
|
|||
I do not have access to the folder a:\
Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the
floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#5
|
|||
|
|||
I do not have access to the folder a:\
Yes Harry I do have an floppy drive and you were right it is designated as
the "A" drive. The device manager lists the floppy and says it is working properly. Thanks Ed "Harry Ohrn" wrote: Typically "A" is assigned by the BIOS to floppy drives. Do you have a floppy drive? -- Harry Ohrn MS-MVP [Shell\User] www.webtree.ca/windowsxp "333MBI" wrote in message ... When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#6
|
|||
|
|||
I do not have access to the folder a:\
This error is normally related to CD or DVDs...
[[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#7
|
|||
|
|||
I do not have access to the folder a:\
Thanks Wes but no I donot have access outside of word either. I put a disk
in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#8
|
|||
|
|||
I do not have access to the folder a:\
"333MBI" wrote in message
... Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed Sounds like it's time to spend $8 for a new floopy drive. Steve "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#9
|
|||
|
|||
I do not have access to the folder a:\
That disk may be kaput or there may be problems with the drive.
Did you try more than one disk? Does My Computer see the drive? In My Computer with a blank disk in the drive can you right click the drive and get a menu? What's floppy disk drive look like in Device Manager? Start | Run | Type: devmgmt.msc | click OK Do you see a red "X", blue "i" or green question mark "?" -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#10
|
|||
|
|||
I do not have access to the folder a:\
No Wes I haven’t tried any other drives yet. When I went to the device
manager it says “This device is working properly” , Device usage is enabled, and the details tap says “Device instance id” is “FDC\GENERIC_FLOPPY_DRIVE\4&15E2DB85&0&0” I found no red “X”, Blue "i" or Green “?” Thanks Ed "Wesley Vogel" wrote: That disk may be kaput or there may be problems with the drive. Did you try more than one disk? Does My Computer see the drive? In My Computer with a blank disk in the drive can you right click the drive and get a menu? What's floppy disk drive look like in Device Manager? Start | Run | Type: devmgmt.msc | click OK Do you see a red "X", blue "i" or green question mark "?" -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#11
|
|||
|
|||
I do not have access to the folder a:\
You may be right Steve. I recently put this machine together and I wiped the
hard drive with “Kill Disk” to get rid of the partition. In order to reformat the hard drive I used my floppy to boot Windows 98 drive prior to installing XP. I know “It worked then” doesn’t mean it works now, but I thought I’d give it a shot. Thanks Ed "Og" wrote: "333MBI" wrote in message ... Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed Sounds like it's time to spend $8 for a new floopy drive. Steve "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#12
|
|||
|
|||
I do not have access to the folder a:\
Try some different disks, not drives. Surely you have some floppies lying
around. The idea is to determine if that one disk is toast by seeing if your drive can read other disks. If your drive can read any other disks that you insert, then maybe that disk is toast. If your drive cannot read any disks, then something may be wrong with the drive. If your drive cannot read any disks, can it format a blank disk? Insert a blank disk in the drive. Open My Computer and then click the disk you want to format. On the File menu, point to the name of the floppy drive and then click Format. Can that disk be read on another machine? Sometimes floppies created on earlier versions of Windows cannot be read on XP. -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: No Wes I haven’t tried any other drives yet. When I went to the device manager it says “This device is working properly” , Device usage is enabled, and the details tap says “Device instance id” is “FDC\GENERIC_FLOPPY_DRIVE\4&15E2DB85&0&0” I found no red “X”, Blue "i" or Green “?” Thanks Ed "Wesley Vogel" wrote: That disk may be kaput or there may be problems with the drive. Did you try more than one disk? Does My Computer see the drive? In My Computer with a blank disk in the drive can you right click the drive and get a menu? What's floppy disk drive look like in Device Manager? Start | Run | Type: devmgmt.msc | click OK Do you see a red "X", blue "i" or green question mark "?" -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#13
|
|||
|
|||
I do not have access to the folder a:\
If I put in my old Windows 98 start up disk, and restart the computer, the
drive does read it and boots the computer. On the other hand if I put a blank disk in and try to format it, it looks like the drive is formatting the disk (the green bar counts down), but in the end I get a window that says “Windows was unable to complete the format”. I tried this with a number of different disks some blank some containing data. Thanks Ed "Wesley Vogel" wrote: Try some different disks, not drives. Surely you have some floppies lying around. The idea is to determine if that one disk is toast by seeing if your drive can read other disks. If your drive can read any other disks that you insert, then maybe that disk is toast. If your drive cannot read any disks, then something may be wrong with the drive. If your drive cannot read any disks, can it format a blank disk? Insert a blank disk in the drive. Open My Computer and then click the disk you want to format. On the File menu, point to the name of the floppy drive and then click Format. Can that disk be read on another machine? Sometimes floppies created on earlier versions of Windows cannot be read on XP. -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: No Wes I haven’t tried any other drives yet. When I went to the device manager it says “This device is working properly†, Device usage is enabled, and the details tap says “Device instance id†is “FDC\GENERIC_FLOPPY_DRIVE\4&15E2DB85&0&0â I found no red “Xâ€, Blue "i" or Green “?†Thanks Ed "Wesley Vogel" wrote: That disk may be kaput or there may be problems with the drive. Did you try more than one disk? Does My Computer see the drive? In My Computer with a blank disk in the drive can you right click the drive and get a menu? What's floppy disk drive look like in Device Manager? Start | Run | Type: devmgmt.msc | click OK Do you see a red "X", blue "i" or green question mark "?" -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Thanks Wes but no I donot have access outside of word either. I put a disk in the drive and went to run and typed a: but I get the message "Please incert a disk into drive a:". Thanks Ed "Wesley Vogel" wrote: This error is normally related to CD or DVDs... [[You do not have access to the folder 'drive:\'. See your administrator for access to this folder.]] If A: is the floppy drive it will not be listed in diskmgmt.msc. Probably because floppy drives are reserved for A: and B: and you can't change this. Can you access the A: outside of Word? With a disk in the drive, type a: in Start | Run and click OK. Does it open? -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#14
|
|||
|
|||
I do not have access to the folder a:\
"333MBI" wrote in message ... Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote Do not try to save Word documents to anything other than your hard drive and then move or copy to the "A" Drive. Word saves several files along with the ..doc file. SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
#15
|
|||
|
|||
I do not have access to the folder a:\
Thanks Chuck. XP may be different. I use to save files directly to the “A”
drive when I was using ME. As soon as I get this sorted out I’ll try that, but for now when I try to move a file from the hard drive to the “A” drive I get “Please insert a disk into drive A:” "Chuck Davis" wrote: "333MBI" wrote in message ... Sorry Wes, I assumed the "A" drive was normally the floppy drive. It is the floppy drive that I can't access. Thanks Ed. "Wesley Vogel" wrote: If the A drive is a CD or DVD drive... quote Do not try to save Word documents to anything other than your hard drive and then move or copy to the "A" Drive. Word saves several files along with the ..doc file. SYMPTOMS When you try to save a file in that is from one of the programs that are listed in the "Applies to" section to a CD-RW or a DVD/CD-RW drive, the file is not saved. Additionally, you receive the following error message: Incorrect function. When you click OK in the error message, you receive the following error message: You do not have access to the folder 'drive:\'. See your administrator for access to this folder. ....you must save the file to the hard disk drive, and then use the CD-ROM recording program to burn the file to a CD-RW or a DVD/CD-RW drive. quote from... You receive an "Incorrect function" error message when you try to save a file from an Office program to a CD-RW or a DVD/CD-RW drive http://support.microsoft.com/kb/905431 -- Hope this helps. Let us know. Wes MS-MVP Windows Shell/User In , 333MBI hunted and pecked: When I try to save a "Word" document to the "A" drive I get the following: "The parameter is incorrect." When I click on the OK button I get "You do not have access to the folder A:\. See administrator for access to this folder. I went to diskmgmt.msc to see if I could sort this out but the A:\ drive is not listed. |
|
Thread Tools | |
Display Modes | |
|
|