If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
cannot install Epson Stylus scanner
i have an ES CX9400Fax Series All-In-One. I'm able to install the printer
and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
Ads |
#2
|
|||
|
|||
cannot install Epson Stylus scanner
Did you check that it was the latest software package from Epson?
There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#3
|
|||
|
|||
cannot install Epson Stylus scanner driver *error code 39*
Yes i did check to make sure i had the latest software package from Epson
I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#4
|
|||
|
|||
cannot install Epson Stylus scanner driver *error code 39*
In the Control Panel, Administrative Tools, Services, what is the WIA
(Windows Image Acquisition) set as.... Manual, Automatic or Disabled? If Automatic, is it started? -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... Yes i did check to make sure i had the latest software package from Epson I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#5
|
|||
|
|||
cannot install Epson Stylus scanner driver *error code 39*
The WIA was already set as "Automatic" and "Started". Thx for your reply.
"Cari (MS-MVP)" wrote: In the Control Panel, Administrative Tools, Services, what is the WIA (Windows Image Acquisition) set as.... Manual, Automatic or Disabled? If Automatic, is it started? -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... Yes i did check to make sure i had the latest software package from Epson I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#6
|
|||
|
|||
cannot install Epson Stylus scanner driver *error code 39*
The WIA was already set as "Automatic" and "Started". Thx for your reply.
"Cari (MS-MVP)" wrote: In the Control Panel, Administrative Tools, Services, what is the WIA (Windows Image Acquisition) set as.... Manual, Automatic or Disabled? If Automatic, is it started? -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... Yes i did check to make sure i had the latest software package from Epson I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#7
|
|||
|
|||
cannot install Epson Stylus scanner driver *error code 39*
YEAH!!...I FOUND THE ANSWER AND IT WORKS!!
IT WAS A LOGITECH WEBCAM PROBLEM....I INSTALLED AND UNINSTALLED THIS WEBCAM LONG-TIME AGO. WHAT I DIDN'T KNOW AT THAT TIME WAS THAT IT DIDN'T REMOVE AN IMPORTANT DATA FIELD IN MY WINDOWS REGISTRY: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F} I JUST REMOVED THE TEXT "LVMVDRV" IN THE LOWERFILTERS SECTION OF THE KEY, CLOSED MY REGISTRY, SHUT-OFF MY EPSON ALL-IN-ONE U.S.B. PRINTER, AND RE-BOOTED MY COMPUTER. THEN AS SOON AS WINDOWS DESKTOP CAME-UP, I TURNED ON MY PRINTER. WINDOWS FINALLY FOUND AND INSTALLED MY EPSON PRINTER'S SCANNER DRIVER.....YEAHHHHHHHHHHHH!!! MORAL OF THE STORY: DO NOT EVER UNISTALL A LOGITECH WEBCAM. IT WILL PREVENT YOU FROM INSTALLING ANOTHER IMAGING DEVICE ON YOUR COMPUTER "Romeo2008" wrote: The WIA was already set as "Automatic" and "Started". Thx for your reply. "Cari (MS-MVP)" wrote: In the Control Panel, Administrative Tools, Services, what is the WIA (Windows Image Acquisition) set as.... Manual, Automatic or Disabled? If Automatic, is it started? -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... Yes i did check to make sure i had the latest software package from Epson I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? |
#8
|
|||
|
|||
RE YEAH!!...I FOUND THE ANSWER AND IT WORKS!!
A big thank you for that. Spent hours trying installs reinstalls reg cleans with no luck.
Same thing took webcam off the other week as part of a tidy up: would not have made the connection ta again. On Monday, May 05, 2008 5:48 PM Romeo200 wrote: i have an ES CX9400Fax Series All-In-One. I'm able to install the printer and fax drivers, but not the scanner driver...i get the following message in device driver. **Windows cannot load the device driver for this hardware. The driver may be corupted or missing. (Code 39) ** I had the same issue with a Canon MX300 and returned it thinking that it was a corrupted driver from the manufacturer. Now i realize it has something to do with my Windows XP media center edition How do i check and fix the problem ? On Monday, May 05, 2008 11:12 PM Cari \(MS-MVP\) wrote: Did you check that it was the latest software package from Epson? There is nothing different in Media Center Edition than Home or Pro in regards to installing hardware. -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... On Tuesday, May 06, 2008 12:12 PM Romeo200 wrote: Yes i did check to make sure i had the latest software package from Epson I even tried installing the drivers on a friend's laptop and it worked. So the problem must be local to my Windows XP environment. Is there any way i can check to make sure my system is not corrupted ? Its just too weird that it allows me to install the printer driver, the fax driver but not the scanner driver ......thx a bunch for your effort(s) "Cari (MS-MVP)" wrote: On Tuesday, May 06, 2008 3:00 PM Cari \(MS-MVP\) wrote: In the Control Panel, Administrative Tools, Services, what is the WIA (Windows Image Acquisition) set as.... Manual, Automatic or Disabled? If Automatic, is it started? -- Cari (MS-MVP) Printing & Imaging www.coribright.com/windows "Romeo2008" wrote in message ... On Tuesday, May 06, 2008 6:12 PM Romeo200 wrote: The WIA was already set as "Automatic" and "Started". Thx for your reply. "Cari (MS-MVP)" wrote: On Tuesday, May 06, 2008 7:53 PM Romeo200 wrote: YEAH!!...I FOUND THE ANSWER AND IT WORKS!! IT WAS A LOGITECH WEBCAM PROBLEM....I INSTALLED AND UNINSTALLED THIS WEBCAM LONG-TIME AGO. WHAT I DIDN'T KNOW AT THAT TIME WAS THAT IT DIDN'T REMOVE AN IMPORTANT DATA FIELD IN MY WINDOWS REGISTRY: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F} I JUST REMOVED THE TEXT "LVMVDRV" IN THE LOWERFILTERS SECTION OF THE KEY, CLOSED MY REGISTRY, SHUT-OFF MY EPSON ALL-IN-ONE U.S.B. PRINTER, AND RE-BOOTED MY COMPUTER. THEN AS SOON AS WINDOWS DESKTOP CAME-UP, I TURNED ON MY PRINTER. WINDOWS FINALLY FOUND AND INSTALLED MY EPSON PRINTER'S SCANNER DRIVER.....YEAHHHHHHHHHHHH!!! MORAL OF THE STORY: DO NOT EVER UNISTALL A LOGITECH WEBCAM. IT WILL PREVENT YOU FROM INSTALLING ANOTHER IMAGING DEVICE ON YOUR COMPUTER "Romeo2008" wrote: Submitted via EggHeadCafe - Software Developer Portal of Choice ASP.NET HttpPostedFile Image Resizer http://www.eggheadcafe.com/tutorials...e-resizer.aspx |
Thread Tools | |
Display Modes | |
|
|