A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Is there a 64bit XP Pro driver suitable for Matrox G200eW video?



 
 
Thread Tools Display Modes
  #1  
Old September 3rd 09, 09:28 PM posted to microsoft.public.windowsxp.hardware
John H.
external usenet poster
 
Posts: 4
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

Hi, I have a Dell PowerEdge R410 Server with an onboard Matrox G200eW
video controller. Long story short, we have installed the 64bit
version of Windows XP Pro on the server. We have been able to find
drivers for all of the devices except the video controller.

Matrox’s website does not have an XP Pro 64bit driver for the G200eW.
It does say that the G200eW is based on the G2+ chip set. I was
hoping that there might be a generic G2+ 64bit video driver out there,
but I have not been able to find one.

Anybody, got any ideas?

Thanks,
John
Ads
  #2  
Old September 3rd 09, 10:34 PM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

John H. wrote:
Hi, I have a Dell PowerEdge R410 Server with an onboard Matrox G200eW
video controller. Long story short, we have installed the 64bit
version of Windows XP Pro on the server. We have been able to find
drivers for all of the devices except the video controller.

Matrox’s website does not have an XP Pro 64bit driver for the G200eW.
It does say that the G200eW is based on the G2+ chip set. I was
hoping that there might be a generic G2+ 64bit video driver out there,
but I have not been able to find one.

Anybody, got any ideas?

Thanks,
John


Supermicro has a board with G200ew.

http://www.supermicro.com/products/m...0/X8DAH+-F.cfm

ftp://ftp.supermicro.com/driver/VGA/...G200e/Windows/

ftp://ftp.supermicro.com/driver/VGA/...s/v1.00.46.zip

"The package contains the following folders:

x32 Driver installation for 32-bit Windows 2000, XP, Server 2003, Vista, Server 2008
x64 Driver installation for 64-bit Windows 2000, XP, Server 2003, Vista, Server 2008"

HTH,
Paul
  #3  
Old September 3rd 09, 10:34 PM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

John H. wrote:
Hi, I have a Dell PowerEdge R410 Server with an onboard Matrox G200eW
video controller. Long story short, we have installed the 64bit
version of Windows XP Pro on the server. We have been able to find
drivers for all of the devices except the video controller.

Matrox’s website does not have an XP Pro 64bit driver for the G200eW.
It does say that the G200eW is based on the G2+ chip set. I was
hoping that there might be a generic G2+ 64bit video driver out there,
but I have not been able to find one.

Anybody, got any ideas?

Thanks,
John


Supermicro has a board with G200ew.

http://www.supermicro.com/products/m...0/X8DAH+-F.cfm

ftp://ftp.supermicro.com/driver/VGA/...G200e/Windows/

ftp://ftp.supermicro.com/driver/VGA/...s/v1.00.46.zip

"The package contains the following folders:

x32 Driver installation for 32-bit Windows 2000, XP, Server 2003, Vista, Server 2008
x64 Driver installation for 64-bit Windows 2000, XP, Server 2003, Vista, Server 2008"

HTH,
Paul
  #4  
Old September 3rd 09, 10:52 PM posted to microsoft.public.windowsxp.hardware
John H.
external usenet poster
 
Posts: 4
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

Thanks, Paul.
  #5  
Old September 3rd 09, 10:52 PM posted to microsoft.public.windowsxp.hardware
John H.
external usenet poster
 
Posts: 4
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

Thanks, Paul.
  #6  
Old February 14th 13, 11:35 AM posted to microsoft.public.windowsxp.hardware
bemymonkey
external usenet poster
 
Posts: 1
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

John H. wrote on 09/03/2009 16:28 ET :
Hi, I have a Dell PowerEdge R410 Server with an onboard Matrox G200eW
video controller. Long story short, we have installed the 64bit
version of Windows XP Pro on the server. We have been able to find
drivers for all of the devices except the video controller.

Matrox’s website does not have an XP Pro 64bit driver for the G200eW.
It does say that the G200eW is based on the G2+ chip set. I was
hoping that there might be a generic G2+ 64bit video driver out there,
but I have not been able to find one.

Anybody, got any ideas?

Thanks,
John

Hi, do either of you still have a copy of this driver? The version now stored
on
the SuperMicro FTP server seems to be for Server 2003 and newer (XP refuses to
recognize the driver)...
  #7  
Old February 14th 13, 04:20 PM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default Is there a 64bit XP Pro driver suitable for Matrox G200eW video?

bemymonkey wrote:
John H. wrote on 09/03/2009 16:28 ET :
Hi, I have a Dell PowerEdge R410 Server with an onboard Matrox G200eW
video controller. Long story short, we have installed the 64bit
version of Windows XP Pro on the server. We have been able to find
drivers for all of the devices except the video controller.

Matrox’s website does not have an XP Pro 64bit driver for the G200eW.
It does say that the G200eW is based on the G2+ chip set. I was
hoping that there might be a generic G2+ 64bit video driver out there,
but I have not been able to find one.

Anybody, got any ideas?

Thanks,
John

Hi, do either of you still have a copy of this driver? The version now stored
on
the SuperMicro FTP server seems to be for Server 2003 and newer (XP refuses to
recognize the driver)...


ftp://ftp.supermicro.com/driver/VGA/.../v1.02.05s.zip

All I can suggest to you, is download and unzip that.

Make a backup of C:, in case the driver messes up. Then
you can roll the OS back, if this experiment fails.

The contents of the ZIP might be similar to this. This is the 32 bit driver.

ftp://ftp.supermicro.com/CDR-C7_1.02...e/Windows/X32/

This could be for Win2003 = S03X32.inf
This could be for Win2008 = S08X32.inf

I would right-click on the S03X32.inf and select "Install" from the
context menu. Maybe it will install. Maybe not. If you install this
way (INF style), you might not be able to remove it later. There
would be no entry in "Add/Remove". While you can roll back one
level of driver, from Device Manager, I wouldn't want to bet
my life on how clean that was. That's why I'm suggesting a
backup of C: as the safest thing to do.

Sometimes, you can tell from the INF file, it isn't intended for a
particular OS. I don't really see anything in that file, to prevent
an INF style install. You can try it and see if it "takes". If
it completely de-stabilizes your OS, then use your backup of C: to fix it.

I wasn't able to track down the old driver, on either the matrox.com site
or on the nuvoton site. If nuvoton bought the G200ew chip design,
it is not apparent from the contents of the nuvoton web site.

The Matrox site is particularly poorly designed, so not being able
to find the driver is no surprise.

Paul
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 08:19 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.