If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Optical drive not recognized.
I have two optical drives.
I disconnected one to use the cables for an SSD and this worked fine. But now the other optical drive is not recognized. Why has this stopped working? |
Ads |
#2
|
|||
|
|||
Optical drive not recognized.
Peter Jason wrote:
I have two optical drives. I disconnected one to use the cables for an SSD and this worked fine. But now the other optical drive is not recognized. Why has this stopped working? System Manufacturer: Gigabyte Technology Co., Ltd. System Model: X58A-UD7 X58/ICH10R (LGA1366) 6 SATA Marvell 9128 2 SATA (+ 1 IDE not used???) JMB362 2 SATA (close to ESATA connectors on back) GB SATA2 (JMB368?) 2 SATA + 1 IDE About the only thing I can figure, is the Marvell supports RAID, and maybe ATAPI mode doesn't work if a RAID drive is plugged into one of the Marvell ports ? Paul |
#3
|
|||
|
|||
Optical drive not recognized.
On Thu, 07 Feb 2019 22:37:01 -0500, Paul
wrote: Peter Jason wrote: I have two optical drives. I disconnected one to use the cables for an SSD and this worked fine. But now the other optical drive is not recognized. Why has this stopped working? System Manufacturer: Gigabyte Technology Co., Ltd. System Model: X58A-UD7 X58/ICH10R (LGA1366) 6 SATA Marvell 9128 2 SATA (+ 1 IDE not used???) JMB362 2 SATA (close to ESATA connectors on back) GB SATA2 (JMB368?) 2 SATA + 1 IDE About the only thing I can figure, is the Marvell supports RAID, and maybe ATAPI mode doesn't work if a RAID drive is plugged into one of the Marvell ports ? Paul I've done some tests & it looks like a faulty cable/connector. |
#4
|
|||
|
|||
Optical drive not recognized.
On Fri, 08 Feb 2019 13:55:23 +1100, Peter Jason wrote:
I have two optical drives. I disconnected one to use the cables for an SSD and this worked fine. But now the other optical drive is not recognized. Why has this stopped working? SATA? |
Thread Tools | |
Display Modes | Rate This Thread |
|
|