If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rating: | Display Modes |
#1
|
|||
|
|||
How to get directly to the TimeDate Panel
Hi All,
I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T |
Ads |
#2
|
|||
|
|||
How to get directly to the TimeDate Panel
"Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) -- SC Tom |
#3
|
|||
|
|||
How to get directly to the TimeDate Panel
On 12/13/2014 04:17 AM, SC Tom wrote:
"Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) It is easier for me to do it win winr when I am doing remote support, as clicking in the notification area can be a real pain in the neck (not my exact word) over a slow connection. |
#4
|
|||
|
|||
How to get directly to the TimeDate Panel
"Todd" wrote in message ... On 12/13/2014 04:17 AM, SC Tom wrote: "Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) It is easier for me to do it win winr when I am doing remote support, as clicking in the notification area can be a real pain in the neck (not my exact word) over a slow connection. Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. Keyboard commands are sometimes easier and quicker to use. If you like, here are some pages for keyboard shortcuts: List of XP keyboard shortcuts http://support.microsoft.com/default...;en-us;Q301583 List of Win7 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-7 List of Win8 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-8 Nice to have at times :-) -- SC Tom |
#5
|
|||
|
|||
How to get directly to the TimeDate Panel
On 12/13/2014 08:01 PM, SC Tom wrote:
"Todd" wrote in message ... On 12/13/2014 04:17 AM, SC Tom wrote: "Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) It is easier for me to do it win winr when I am doing remote support, as clicking in the notification area can be a real pain in the neck (not my exact word) over a slow connection. Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. Keyboard commands are sometimes easier and quicker to use. If you like, here are some pages for keyboard shortcuts: List of XP keyboard shortcuts http://support.microsoft.com/default...;en-us;Q301583 List of Win7 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-7 List of Win8 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-8 Nice to have at times :-) Sweet links. Thank you! |
#6
|
|||
|
|||
How to get directly to the TimeDate Panel
On 12/13/2014 08:01 PM, SC Tom wrote:
"Todd" wrote in message ... On 12/13/2014 04:17 AM, SC Tom wrote: "Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) It is easier for me to do it win winr when I am doing remote support, as clicking in the notification area can be a real pain in the neck (not my exact word) over a slow connection. Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) 1+ since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. Keyboard commands are sometimes easier and quicker to use. Especially when there are constant disruptions in their Internet service! |
#7
|
|||
|
|||
How to get directly to the TimeDate Panel
On 12/13/2014 08:01 PM, SC Tom wrote:
Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. I have been doing remote assists all day long. One of the things I am finding that helps a lot is to turn off Aero. |
#8
|
|||
|
|||
How to get directly to the TimeDate Panel
"Todd" wrote in message ... On 12/13/2014 08:01 PM, SC Tom wrote: "Todd" wrote in message ... On 12/13/2014 04:17 AM, SC Tom wrote: "Todd" wrote in message ... Hi All, I couldn't find this with DuckDuckGo, so I had to dig it out with Process Explorer. If you want to go directly to the Time And Date panel, winR TimeDate.cpl The actual command is "C:\Windows\system32\rundll32.exe" Shell32.dll,Control_RunDLL "C:\Windows\system32\timedate.cpl" Hope this helps someone else, -T Or click on the time in the notification area and select "Change date and time settings..." Two clicks of the mouse and you're there :-) It is easier for me to do it win winr when I am doing remote support, as clicking in the notification area can be a real pain in the neck (not my exact word) over a slow connection. Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. Keyboard commands are sometimes easier and quicker to use. If you like, here are some pages for keyboard shortcuts: List of XP keyboard shortcuts http://support.microsoft.com/default...;en-us;Q301583 List of Win7 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-7 List of Win8 keyboard shortcuts http://windows.microsoft.com/en-us/w...cuts=windows-8 Nice to have at times :-) Sweet links. Thank you! You're welcome :-) -- SC Tom |
#9
|
|||
|
|||
How to get directly to the TimeDate Panel
"Todd" wrote in message ... On 12/13/2014 08:01 PM, SC Tom wrote: Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. I have been doing remote assists all day long. One of the things I am finding that helps a lot is to turn off Aero. Most of the remote assists I did were before Win7, but I can see where Aero could be a PITA, especially with unreliable internet service. One of the things I did (even if temporarily) was turn off "auto-hide the taskbar." Made it easier to get into menus and programs on XP, NT and Win2k (yep, been that long). It was frustrating at times to move the pointer down to the taskbar and have it not show on my screen for a few seconds, then realize when it did pop up that I had missed what I was aiming for (even though it looked like I clicked it), and have the taskbar drop out of sight again. Curse at it and start again GRRR. Un-hiding the taskbar took care of my HBP moments :-) -- SC Tom |
#10
|
|||
|
|||
How to get directly to the TimeDate Panel
On 12/14/2014 04:08 AM, SC Tom wrote:
"Todd" wrote in message ... On 12/13/2014 08:01 PM, SC Tom wrote: Ah, you didn't mention "remote" in your OP. Considering that, I agree with you (and 'neck' wouldn't be my exact word either BG) since most remote programs I've used are not too swift on the uptake when it comes to mouse usage. I have been doing remote assists all day long. One of the things I am finding that helps a lot is to turn off Aero. Most of the remote assists I did were before Win7, but I can see where Aero could be a PITA, especially with unreliable internet service. One of the things I did (even if temporarily) was turn off "auto-hide the taskbar." Made it easier to get into menus and programs on XP, NT and Win2k (yep, been that long). It was frustrating at times to move the pointer down to the taskbar and have it not show on my screen for a few seconds, then realize when it did pop up that I had missed what I was aiming for (even though it looked like I clicked it), and have the taskbar drop out of sight again. Curse at it and start again GRRR. Un-hiding the taskbar took care of my HBP moments :-) When I am using Go To Assist, I have to shut off the auto hide. Drives me nuts. That thing makes me cringe when I find it anyway. Means the operator doesn't know how to use his computer. I could not do my job without the task bar. And popping back and forth is just obnoxious and I forget what I wanted to bring into the foreground. |
Thread Tools | |
Display Modes | Rate This Thread |
|
|