If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Intel HD Graphics 530
This FAQ describes new drivers.
https://www.intel.com/content/www/us...s-drivers.html So the 24.x.x.xxx series are now 'legacy' versions which does not use the new Windows driver model. Noting that mine was version 24.20.100.6286 I went ahead and used the Intel Download Centre. That first required installation of the latest Intel® Driver and Support Assistant (IDSA). I then installed the driver update - or that's what I thought - and got a successful conclusion message. But after a reboot Device Manager still shows the same version: 24.20.100.6286 Have I misunderstood something? I've just seen a post elsewhere that includes this: "The Intel download warns that this latest driver uses a new Windows driver model and notes that if you need to rollback (suspicious?) you need to uninstall the driver via the Add / Remove Programs in Control Panel rather that using the rollback in Device Manager which could cause big problems." So I'm relieved that my 'update' doesn't appear to have been implemented. But also somewhat confused and would appreciate advice from others using the built-in Intel graphics please. Terry, East Grinstead, UK |
Ads |
#2
|
|||
|
|||
Intel HD Graphics 530
Terry Pinnell wrote:
So I'm relieved that my 'update' doesn't appear to have been implemented. But also somewhat confused and would appreciate advice from others using the built-in Intel graphics please. A few days ago I upgraded my intel HD 620 to the "DCH" style drivers manually rather than use the IDSA tool, the version is 25.20.100.6444, all went smoothly. |
#3
|
|||
|
|||
Intel HD Graphics 530
Terry Pinnell wrote: after a reboot Device Manager still shows the same version: 24.20.100.6286 Does dxdiag.exe show the 24.xx.yyy.zzzz drivers are WDDM 2.5 ? |
#4
|
|||
|
|||
Intel HD Graphics 530
Andy Burns wrote:
Terry Pinnell wrote: after a reboot Device Manager still shows the same version: 24.20.100.6286 Does dxdiag.exe show the 24.xx.yyy.zzzz drivers are WDDM 2.5 ? Andy, No, 2.1. I'll have another attempt at updating tomorrow, given your reassuring earlier reply. https://www.dropbox.com/s/2jey95a2ib...WDDM.jpg?raw=1 Terry, East Grinstead, UK |
Thread Tools | |
Display Modes | Rate This Thread |
|
|