If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
LaserJet 8000DN: net use LPT1 does not print correctly
I have been working with a LaserJet 8000DN, trying to get it set up to work
with a DOS application for a client. This is an accounting type of application that prints checks. They wanted it set up so that when they print checks it will print from Tray 1 and when printing from anything else it will go the large capacity Tray 4. The printer is set to Tray 1 = First, and the rest of the trays are default to Plain. I am using two different drivers. The driver I am using to print to Tray 1 is an 8000 PS driver. The driver I use to only print to Tray 4 is an 8000 PCL driver. They want to be able to print from Tray 4 using the selected driver even if there is paper in Tray 1. The issue is that even after using the command "net use LPT1 \\server\printer" it keeps printing to Tray 1 when printing from the DOS program or even when using the command "dir LPT1". When using this same printer map in Windows, it prints to Tray 4 even with paper in Tray 1. I have no idea what is going on with this thing. I've tried countless numbers of drivers to no avail and haven't really come up with anything searching the forums. Any help would be appreciated! |
Ads |
#2
|
|||
|
|||
LaserJet 8000DN: net use LPT1 does not print correctly
Zack,
The issue is that even after using the command "net use LPT1 \\server\printer" it keeps printing to Tray 1 when printing from the DOS program or even when using the command "dir LPT1". When using this same printer map in Windows, it prints to Tray 4 even with paper in Tray 1. the NET USE command uses the print driver just to redirect the LPT port to the one specified in the driver, but the DOS job doesn't really go through the driver itself, so it doesn't matter which settings you'll apply in it. Tray, copies, and all other "driver related" settings are used only when printing from Windows to that printer driver. You may want to have a look at Printfil to have your DOS jobs automatically converted in true GDI Windows jobs and forwarded to the printer by going through the printer driver. You can find more info and a free trial version to download at http://www.printfil.com Kind regards, Davide Guolo aSwIt s.r.l. -------------------------------------------------------------- Printfil - Windows Printing System for Applications http://www.printfil.com Odbc4All - Connection to ODBC Data Sources for any Application http://www.aswit.com/odbc4all @Kill - Batch Close Windows Applications - Freeware http://www.aswit.com/akill -------------------------------------------------------------- |
Thread Tools | |
Display Modes | |
|
|