A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » General XP issues or comments
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Drive Image7 on WinXP Pro



 
 
Thread Tools Display Modes
  #1  
Old July 17th 10, 11:07 PM posted to microsoft.public.windowsxp.general
AAH
external usenet poster
 
Posts: 69
Default Drive Image7 on WinXP Pro

When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?



Ads
  #2  
Old July 18th 10, 12:38 AM posted to microsoft.public.windowsxp.general
VanguardLH[_2_]
external usenet poster
 
Posts: 10,881
Default Drive Image7 on WinXP Pro

AAH wrote:

When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


What you have is way too old, unusable, and unreliable (especially in
regards to recovering the image plus under an UNSUPPORTED Windows).

Symantec got DriveImage as part of their acquisition of PowerQuest
(which also included the PartitionMagic product). Symantec then killed
off DriveImage since they already had a competing product (Norton
Ghost). Obviously they never updated DriveImage after they acquired it.
They offered PartitionMagic for a couple years but never updated it and
now you can't find it listed as an available product anymore (it became
unsupported many years ago). You are trying to use PowerQuest products
those don't support any version of Windows past XP. You'll need to dump
the incompatible products and get something newer and which actually
lists Windows 7 as a supported platform.

If you want to know what are the current free partition imaging programs
available, I'd suggest asking in the alt.comp.freeware newsgroup (you
won't find that on Microsoft's NNTP server, the one you used to post
here, which only carries the microsoft.public.* newsgroups). Or you
could Google for it, as in:

http://www.google.com/search?q=%2Bfr...aging+software

For payware, Acronis TrueImage and Norton Ghost are probably the primary
contenders.
  #3  
Old July 18th 10, 01:34 AM posted to microsoft.public.windowsxp.general
Allan
external usenet poster
 
Posts: 610
Default Drive Image7 on WinXP Pro


"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?

Ask for a new CD from the software manufacturer; it may be incompatible with
current Windows XP.

  #4  
Old July 18th 10, 01:34 AM posted to microsoft.public.windowsxp.general
Allan
external usenet poster
 
Posts: 610
Default Drive Image7 on WinXP Pro


"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?

Ask for a new CD from the software manufacturer; it may be incompatible with
current Windows XP.

  #5  
Old July 18th 10, 02:26 AM posted to microsoft.public.windowsxp.general
No_Name
external usenet poster
 
Posts: 9
Default Drive Image7 on WinXP Pro

On Sat, 17 Jul 2010 19:34:36 -0500, just as I was about to take a
herb, "Allan" disturbed my reverie and wrote:

Ask for a new CD from the software manufacturer; it may be incompatible with
current Windows XP.


a) It's not made any more as per previous post
b) since when did software housed give out CDs to replace old
versions.

What a tit.
  #6  
Old July 18th 10, 02:26 AM posted to microsoft.public.windowsxp.general
No_Name
external usenet poster
 
Posts: 9
Default Drive Image7 on WinXP Pro

On Sat, 17 Jul 2010 19:34:36 -0500, just as I was about to take a
herb, "Allan" disturbed my reverie and wrote:

Ask for a new CD from the software manufacturer; it may be incompatible with
current Windows XP.


a) It's not made any more as per previous post
b) since when did software housed give out CDs to replace old
versions.

What a tit.
  #7  
Old July 18th 10, 06:27 AM posted to microsoft.public.windowsxp.general
Pegasus [MVP]
external usenet poster
 
Posts: 2,361
Default Drive Image7 on WinXP Pro



"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a while.
You can install it on some Win2000 machine, then burn a bootable Recovery CD
and use that CD on your WinXP machine.

  #8  
Old July 18th 10, 06:27 AM posted to microsoft.public.windowsxp.general
Pegasus [MVP]
external usenet poster
 
Posts: 2,361
Default Drive Image7 on WinXP Pro



"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a while.
You can install it on some Win2000 machine, then burn a bootable Recovery CD
and use that CD on your WinXP machine.

  #11  
Old July 18th 10, 12:39 PM posted to microsoft.public.windowsxp.general
Doum
external usenet poster
 
Posts: 309
Default Drive Image7 on WinXP Pro

"Pegasus [MVP]" écrivait
:



"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a
while. You can install it on some Win2000 machine, then burn a
bootable Recovery CD and use that CD on your WinXP machine.



....without installing it; used that way, it works with whatever is on the
HD.
  #12  
Old July 18th 10, 12:39 PM posted to microsoft.public.windowsxp.general
Doum
external usenet poster
 
Posts: 309
Default Drive Image7 on WinXP Pro

"Pegasus [MVP]" écrivait
:



"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a
while. You can install it on some Win2000 machine, then burn a
bootable Recovery CD and use that CD on your WinXP machine.



....without installing it; used that way, it works with whatever is on the
HD.
  #13  
Old July 18th 10, 08:48 PM posted to microsoft.public.windowsxp.general
AAH
external usenet poster
 
Posts: 69
Default Drive Image7 on WinXP Pro

Pegasus

Drive Image 7 has nothing to do with
Acronis. It is a completely a different
product. I think you have in mind a
droduct called Acronis True Immage may be
ver 7.


"Pegasus [MVP]" wrote in message
...


"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a while.
You can install it on some Win2000 machine, then burn a bootable Recovery CD
and use that CD on your WinXP machine.


  #14  
Old July 18th 10, 08:48 PM posted to microsoft.public.windowsxp.general
AAH
external usenet poster
 
Posts: 69
Default Drive Image7 on WinXP Pro

Pegasus

Drive Image 7 has nothing to do with
Acronis. It is a completely a different
product. I think you have in mind a
droduct called Acronis True Immage may be
ver 7.


"Pegasus [MVP]" wrote in message
...


"AAH" wrote in message
...
When I try to install Drive Image7 on to
WinXP Pro, The error message is:-
"1607: Unable to install installshield
Scripting Runtime"
Any help? I have no idea?

I bought the Drive Image7 cd few year ago.
It was part of Drive Image 2000 or Ver 6.

There must be some upgrade over the years
Can any user of Drive Image Ver 7 please be
help to pinpoint the site where an upgrade can
be found.

I shall be very very grateful for help?


DriveImage 7 is so old that Acronis made it available freely for a while.
You can install it on some Win2000 machine, then burn a bootable Recovery CD
and use that CD on your WinXP machine.


  #15  
Old July 19th 10, 04:11 AM posted to microsoft.public.windowsxp.general
VanguardLH[_2_]
external usenet poster
 
Posts: 10,881
Default Drive Image7 on WinXP Pro

Pegasus [MVP] wrote:


DriveImage 7 is so old that Acronis made it available freely for a while.


How could Acronis be distributing a commercial product (for free or at
any price) that they never owned? That would constitute both piracy and
copyright infringment (generating revenue is not required to violate
copyright). DriveImage was a PowerQuest product and PowerQuest got
gobbled up and made to disappear by Symantec.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 10:08 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.