If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Windows XP USB DEVICE NOT RECOGNIZED errors
Hi,
Try this way: First, undock the laptop. Boot in safe mode and login as administrator. Go to device manager and double click the Universal Serail Bus controller. Hight light the XXX PCI to USB Host Controller, right click and select uninstall; click Apply and OK. Reboot to normal. the find new hardware messages should appear and load the USB driver. Go to device manager again to ensure the XXX PCI to USB Host Controller is there and windows confirm it is working properly. Plug the axim and run Active Sync again. Remember next time, when ever you pulg in any USB device to the system and the "safely remove hardware icon" appeared at the right handside of the bottom task bar, use this icon before unplug the USB device from the system. hope it helps. Peter -----Original Message----- I am running XP Professional, all latest updates and service packs. I am running this on a Dell Inspiron 8500. I am not resuming and system does not hibernate, it is connected to a dock however. This all started after I installed started using my Dell Axim with this system. I have had Active Sync installed for a while and was capable of hot plugging devices USB, now when I hot plug my axim or any other usb device is says "usb device not recognized". Any ideas guys? I'd really hate to have to redo this machine. E-mail please or if your local just call. -Greg 678-907-8211 . |
Ads |
Thread Tools | |
Display Modes | |
|
|