If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
disc drive error code 22
Hello and Thank you for reading this. I am having problems enabling my TDK
CDRW161040X. I believe it came with the computer when new. When I became owner of the computer I installed a LITE-DVDRW LDW_4115. Both worked fine. Last month I had to do a clean reinstall of my entire system starting with the original software from dell and windows XP. Now my DVDRW works fine but the CDR is not. When I use device manager device status box says, " This device disabled (code 22) Click Enable device to enable this device." The Device usage box says, " Use this device (enable)". When I use trouble shooting wizard it says, " The folowing device is disabled TDK CDRW161040X." I click next to enable and get a message " Windows was not able to enable this device". Both use to work just fine before the reinstall. When I go to help and type in code 22 nothing comes up or my computer search or my search at the Microsoft site. Any help would be appreciated. PEACE & HAPPINESS, Bob. |
Ads |
#2
|
|||
|
|||
disc drive error code 22
Remove the device in device manager, next power down the PC, then remove the
cable from the CD, the power up and boot to Windows. Next power down again and reconnect the cable and the power up once more, Windows should detect a new device and add it. JS "slugger420" wrote in message ... Hello and Thank you for reading this. I am having problems enabling my TDK CDRW161040X. I believe it came with the computer when new. When I became owner of the computer I installed a LITE-DVDRW LDW_4115. Both worked fine. Last month I had to do a clean reinstall of my entire system starting with the original software from dell and windows XP. Now my DVDRW works fine but the CDR is not. When I use device manager device status box says, " This device disabled (code 22) Click Enable device to enable this device." The Device usage box says, " Use this device (enable)". When I use trouble shooting wizard it says, " The folowing device is disabled TDK CDRW161040X." I click next to enable and get a message " Windows was not able to enable this device". Both use to work just fine before the reinstall. When I go to help and type in code 22 nothing comes up or my computer search or my search at the Microsoft site. Any help would be appreciated. PEACE & HAPPINESS, Bob. |
Thread Tools | |
Display Modes | |
|
|