A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Printing and Faxing with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Default Printer won't stay put....



 
 
Thread Tools Display Modes
  #1  
Old January 13th 06, 02:51 AM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

I have an Epson printer and an HP printer connected to one computer on my
home network (Ethernet cable). The HP is set as the default printer. From
the other computer I also set the HP as the default printer, but the default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I have
uninstalled both printers and reinstalled them again setting the HP as the
default, but it will not retain this setting. This is extremely annoying as
I can't just click on a print icon anymore without sending print jobs to the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim


Ads
  #2  
Old January 13th 06, 07:42 AM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

If you use an application that prints, or has the Epson selected as it's
default, it might be the cause. It's also possible that the Epson driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer on my
home network (Ethernet cable). The HP is set as the default printer. From
the other computer I also set the HP as the default printer, but the

default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I have
uninstalled both printers and reinstalled them again setting the HP as the
default, but it will not retain this setting. This is extremely annoying

as
I can't just click on a print icon anymore without sending print jobs to

the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim




  #3  
Old January 13th 06, 02:17 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the most
recent drivers. Doesn't seem to matter whether the printers are on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as it's
default, it might be the cause. It's also possible that the Epson driver
and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer on my
home network (Ethernet cable). The HP is set as the default printer. From
the other computer I also set the HP as the default printer, but the

default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I
have
uninstalled both printers and reinstalled them again setting the HP as
the
default, but it will not retain this setting. This is extremely annoying

as
I can't just click on a print icon anymore without sending print jobs to

the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim






  #4  
Old January 13th 06, 07:14 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default will
be set to the first available printer. Is the Epson a local printer or
also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the most
recent drivers. Doesn't seem to matter whether the printers are on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as it's
default, it might be the cause. It's also possible that the Epson driver
and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer on
my
home network (Ethernet cable). The HP is set as the default printer.
From
the other computer I also set the HP as the default printer, but the

default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I
have
uninstalled both printers and reinstalled them again setting the HP as
the
default, but it will not retain this setting. This is extremely annoying

as
I can't just click on a print icon anymore without sending print jobs to

the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim








  #5  
Old January 13th 06, 11:06 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Alan,

Are you referring to the default printer according to Windows (as shown, for
example, in the Printers and Faxes folder)? I thought that the user can
specify the default printer and that it is supposed to remain unchanged?

If the default printer is a network printer that is unavailable for some
reason, shouldn't it still be the default, but simply give an error when an
attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates things


Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default will
be set to the first available printer. Is the Epson a local printer or
also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the most
recent drivers. Doesn't seem to matter whether the printers are on or
not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as it's
default, it might be the cause. It's also possible that the Epson driver
and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer on
my
home network (Ethernet cable). The HP is set as the default printer.
From
the other computer I also set the HP as the default printer, but the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I
have
uninstalled both printers and reinstalled them again setting the HP as
the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print jobs
to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim










  #6  
Old January 13th 06, 11:27 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

I am unsure how the default printer gets changed. Normally once I set the
default (network or local) it's always the default. I also don't have
vendor printer software installed, no status monitors, just the driver
provided usually from the OS CD. The default only changes when I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as shown,
for example, in the Printers and Faxes folder)? I thought that the user
can specify the default printer and that it is supposed to remain
unchanged?

If the default printer is a network printer that is unavailable for some
reason, shouldn't it still be the default, but simply give an error when
an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates things


Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are on
or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer on
my
home network (Ethernet cable). The HP is set as the default printer.
From
the other computer I also set the HP as the default printer, but the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I
have
uninstalled both printers and reinstalled them again setting the HP as
the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print jobs
to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim












  #7  
Old January 14th 06, 10:43 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on my
computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the driver
Windows installed from the computer that is sharing the printer. Both
printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't have
vendor printer software installed, no status monitors, just the driver
provided usually from the OS CD. The default only changes when I change
it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as shown,
for example, in the Printers and Faxes folder)? I thought that the user
can specify the default printer and that it is supposed to remain
unchanged?

If the default printer is a network printer that is unavailable for some
reason, shouldn't it still be the default, but simply give an error when
an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are on
or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer
on my
home network (Ethernet cable). The HP is set as the default printer.
From
the other computer I also set the HP as the default printer, but the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print. I
have
uninstalled both printers and reinstalled them again setting the HP
as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print jobs
to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim














  #8  
Old January 14th 06, 11:23 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Yes, I would strongly suspect that third party software is responsible for
the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the driver
Windows installed from the computer that is sharing the printer. Both
printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when I
change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as shown,
for example, in the Printers and Faxes folder)? I thought that the user
can specify the default printer and that it is supposed to remain
unchanged?

If the default printer is a network printer that is unavailable for some
reason, shouldn't it still be the default, but simply give an error when
an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer
on my
home network (Ethernet cable). The HP is set as the default printer.
From
the other computer I also set the HP as the default printer, but the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print.
I have
uninstalled both printers and reinstalled them again setting the HP
as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim
















  #9  
Old January 15th 06, 12:36 AM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

OK, thanks for trying. I'll contact Epson.

~Jim

"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is responsible for
the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when I
change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought that
the user can specify the default printer and that it is supposed to
remain unchanged?

If the default printer is a network printer that is unavailable for
some reason, shouldn't it still be the default, but simply give an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer
on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer, but
the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print.
I have
uninstalled both printers and reinstalled them again setting the HP
as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim


















  #10  
Old January 15th 06, 12:58 AM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

One additional note... I just added a printer using the Add Printer Wizard
and when it asked if I wanted to use this printer as the default I checked
"No". I clicked "Finish" and the printer was set to be the new default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is responsible for
the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when I
change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought that
the user can specify the default printer and that it is supposed to
remain unchanged?

If the default printer is a network printer that is unavailable for
some reason, shouldn't it still be the default, but simply give an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one computer
on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer, but
the
default
designation keeps switching to the Epson, sometimes after a reboot,
sometimes I just notice it a while later while attempting to print.
I have
uninstalled both printers and reinstalled them again setting the HP
as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim


















  #11  
Old January 16th 06, 04:51 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Is that reproducible?

If so, you have steps to reproduce that eliminate the possibility that
Alun's theory explains it all. Alun's theory related to the order in which
things start up when you first start you computer.

Paul

"Jim Wood" wrote in message
...
One additional note... I just added a printer using the Add Printer Wizard
and when it asked if I wanted to use this printer as the default I checked
"No". I clicked "Finish" and the printer was set to be the new default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is responsible
for the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when
I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought that
the user can specify the default printer and that it is supposed to
remain unchanged?

If the default printer is a network printer that is unavailable for
some reason, shouldn't it still be the default, but simply give an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a
connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one
computer on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer, but
the
default
designation keeps switching to the Epson, sometimes after a
reboot,
sometimes I just notice it a while later while attempting to
print. I have
uninstalled both printers and reinstalled them again setting the
HP as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim




















  #12  
Old January 19th 06, 04:38 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....



FWIW, I have the exact same problem. An HP laserjet that i want to be
my default and an EpsonR200 that forces itself as the default with each
reboot. It does this on all 3 of my networked pcs. Real PITA.


Paul Baker wrote:
Is that reproducible?

If so, you have steps to reproduce that eliminate the possibility that
Alun's theory explains it all. Alun's theory related to the order in which
things start up when you first start you computer.

Paul

"Jim Wood" wrote in message
...
One additional note... I just added a printer using the Add Printer Wizard
and when it asked if I wanted to use this printer as the default I checked
"No". I clicked "Finish" and the printer was set to be the new default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is responsible
for the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when
I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought that
the user can specify the default printer and that it is supposed to
remain unchanged?

If the default printer is a network printer that is unavailable for
some reason, shouldn't it still be the default, but simply give an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a
connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one
computer on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer, but
the
default
designation keeps switching to the Epson, sometimes after a
reboot,
sometimes I just notice it a while later while attempting to
print. I have
uninstalled both printers and reinstalled them again setting the
HP as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim



















  #13  
Old February 1st 06, 04:15 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

I have a local NEC Superscript 870 and a networked Epson Photo R200. I have
experiance the same problem. It occurs frequently, but I can't identify any
single program that causes it.

"bd" wrote:



FWIW, I have the exact same problem. An HP laserjet that i want to be
my default and an EpsonR200 that forces itself as the default with each
reboot. It does this on all 3 of my networked pcs. Real PITA.


Paul Baker wrote:
Is that reproducible?

If so, you have steps to reproduce that eliminate the possibility that
Alun's theory explains it all. Alun's theory related to the order in which
things start up when you first start you computer.

Paul

"Jim Wood" wrote in message
...
One additional note... I just added a printer using the Add Printer Wizard
and when it asked if I wanted to use this printer as the default I checked
"No". I clicked "Finish" and the printer was set to be the new default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is responsible
for the default printer changing without the user's explicit consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare anywhere on
my computer. In the past I have just selected a default printer (in the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once I set
the default (network or local) it's always the default. I also don't
have vendor printer software installed, no status monitors, just the
driver provided usually from the OS CD. The default only changes when
I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought that
the user can specify the default printer and that it is supposed to
remain unchanged?

If the default printer is a network printer that is unavailable for
some reason, shouldn't it still be the default, but simply give an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that complicates
things

Paul

"Alan Morris [MSFT]" wrote in message
...
If the remote server is not turned on (\\server\printshare) or the
workstation service starts after the spooler starts, then the default
will be set to the first available printer. Is the Epson a local
printer or also a connection?

Setting the default printer on the machine sharing the printer (or
printers?) will have zero impact on the machine that has a
connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both with the
most recent drivers. Doesn't seem to matter whether the printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson selected as
it's
default, it might be the cause. It's also possible that the Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one
computer on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer, but
the
default
designation keeps switching to the Epson, sometimes after a
reboot,
sometimes I just notice it a while later while attempting to
print. I have
uninstalled both printers and reinstalled them again setting the
HP as the
default, but it will not retain this setting. This is extremely
annoying
as
I can't just click on a print icon anymore without sending print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the KB.

TIA,

~Jim




















  #14  
Old February 1st 06, 07:40 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Blame Epson. It's their software that is forcing the R200 to be the
default.
--
Cari (MS-MVP)
Printing & Imaging
http://www.coribright.com/windows



"ax8man" wrote in message
...
I have a local NEC Superscript 870 and a networked Epson Photo R200. I have
experiance the same problem. It occurs frequently, but I can't identify
any
single program that causes it.

"bd" wrote:



FWIW, I have the exact same problem. An HP laserjet that i want to be
my default and an EpsonR200 that forces itself as the default with each
reboot. It does this on all 3 of my networked pcs. Real PITA.


Paul Baker wrote:
Is that reproducible?

If so, you have steps to reproduce that eliminate the possibility that
Alun's theory explains it all. Alun's theory related to the order in
which
things start up when you first start you computer.

Paul

"Jim Wood" wrote in message
...
One additional note... I just added a printer using the Add Printer
Wizard
and when it asked if I wanted to use this printer as the default I
checked
"No". I clicked "Finish" and the printer was set to be the new
default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is
responsible
for the default printer changing without the user's explicit
consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare
anywhere on
my computer. In the past I have just selected a default printer (in
the
printers & faxs folder) and it stayed put. Like Alan I only have the
driver Windows installed from the computer that is sharing the
printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in message
...
I am unsure how the default printer gets changed. Normally once
I set
the default (network or local) it's always the default. I also
don't
have vendor printer software installed, no status monitors, just
the
driver provided usually from the OS CD. The default only changes
when
I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers
no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows (as
shown, for example, in the Printers and Faxes folder)? I thought
that
the user can specify the default printer and that it is supposed
to
remain unchanged?

If the default printer is a network printer that is unavailable
for
some reason, shouldn't it still be the default, but simply give
an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that
complicates
things

Paul

"Alan Morris [MSFT]" wrote in
message
...
If the remote server is not turned on (\\server\printshare) or
the
workstation service starts after the spooler starts, then the
default
will be set to the first available printer. Is the Epson a
local
printer or also a connection?

Setting the default printer on the machine sharing the printer
(or
printers?) will have zero impact on the machine that has a
connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers
no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both
with the
most recent drivers. Doesn't seem to matter whether the
printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson
selected as
it's
default, it might be the cause. It's also possible that the
Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers
current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one
computer on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer,
but
the
default
designation keeps switching to the Epson, sometimes after a
reboot,
sometimes I just notice it a while later while attempting to
print. I have
uninstalled both printers and reinstalled them again setting
the
HP as the
default, but it will not retain this setting. This is
extremely
annoying
as
I can't just click on a print icon anymore without sending
print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the
KB.

TIA,

~Jim






















  #15  
Old February 1st 06, 07:43 PM posted to microsoft.public.windowsxp.print_fax
external usenet poster
 
Posts: n/a
Default Default Printer won't stay put....

Most likely. Epson is the manufacturer that is consistently mentioned
throughout this thread.

Paul

"Cari (MS-MVP)" wrote in message
...
Blame Epson. It's their software that is forcing the R200 to be the
default.
--
Cari (MS-MVP)
Printing & Imaging
http://www.coribright.com/windows



"ax8man" wrote in message
...
I have a local NEC Superscript 870 and a networked Epson Photo R200. I
have
experiance the same problem. It occurs frequently, but I can't identify
any
single program that causes it.

"bd" wrote:



FWIW, I have the exact same problem. An HP laserjet that i want to be
my default and an EpsonR200 that forces itself as the default with each
reboot. It does this on all 3 of my networked pcs. Real PITA.


Paul Baker wrote:
Is that reproducible?

If so, you have steps to reproduce that eliminate the possibility that
Alun's theory explains it all. Alun's theory related to the order in
which
things start up when you first start you computer.

Paul

"Jim Wood" wrote in message
...
One additional note... I just added a printer using the Add Printer
Wizard
and when it asked if I wanted to use this printer as the default I
checked
"No". I clicked "Finish" and the printer was set to be the new
default
printer.

hmmm

~Jim


"Paul Baker" wrote in message
...
Yes, I would strongly suspect that third party software is
responsible
for the default printer changing without the user's explicit
consent.

Paul

"Jim Wood" wrote in message
...
I cannot find anything like the remote server you mentioned
c:\\server\printshare and there is no folder named printshare
anywhere on
my computer. In the past I have just selected a default printer (in
the
printers & faxs folder) and it stayed put. Like Alan I only have
the
driver Windows installed from the computer that is sharing the
printer.
Both printers are on the other computer on my home network.

~Jim


"Alan Morris [MSFT]" wrote in
message
...
I am unsure how the default printer gets changed. Normally once
I set
the default (network or local) it's always the default. I also
don't
have vendor printer software installed, no status monitors, just
the
driver provided usually from the OS CD. The default only changes
when
I change it.

But others do have this problem

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and confers
no
rights.

"Paul Baker" wrote in message
...
Alan,

Are you referring to the default printer according to Windows
(as
shown, for example, in the Printers and Faxes folder)? I thought
that
the user can specify the default printer and that it is supposed
to
remain unchanged?

If the default printer is a network printer that is unavailable
for
some reason, shouldn't it still be the default, but simply give
an
error when an attempt is made to connect to it?

Hopefully, Terminal Services is not involved here, that
complicates
things

Paul

"Alan Morris [MSFT]" wrote in
message
...
If the remote server is not turned on (\\server\printshare) or
the
workstation service starts after the spooler starts, then the
default
will be set to the first available printer. Is the Epson a
local
printer or also a connection?

Setting the default printer on the machine sharing the printer
(or
printers?) will have zero impact on the machine that has a
connection.

--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base he
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto

This posting is provided "AS IS" with no warranties, and
confers no
rights.

"Jim Wood" wrote in message
...
Thank you for responding to my plea...

I'm using Epson Stylus Photo R200 and HP LaserJet 1020 both
with the
most recent drivers. Doesn't seem to matter whether the
printers are
on or not.

~Jim

"Chuck" wrote in message
...
If you use an application that prints, or has the Epson
selected as
it's
default, it might be the cause. It's also possible that the
Epson
driver and
monitor is the culprit.
Are both printers up and running when you have this problem?

Which HP and Epson Printer models, and are the drivers
current?

"Jim Wood" wrote in message
...
I have an Epson printer and an HP printer connected to one
computer on my
home network (Ethernet cable). The HP is set as the default
printer. From
the other computer I also set the HP as the default printer,
but
the
default
designation keeps switching to the Epson, sometimes after a
reboot,
sometimes I just notice it a while later while attempting to
print. I have
uninstalled both printers and reinstalled them again setting
the
HP as the
default, but it will not retain this setting. This is
extremely
annoying
as
I can't just click on a print icon anymore without sending
print
jobs to
the
wrong printer.

Any suggestions? I've not been able to find anything in the
KB.

TIA,

~Jim
























 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Default Printer Resetting Mocacius General XP issues or comments 14 September 21st 05 05:48 PM
default printer won't stay set and finding a printer on network [email protected] Printing and Faxing with Windows XP 0 April 25th 05 02:18 PM
Installing default network printer for all users Gilles Printing and Faxing with Windows XP 2 April 8th 05 07:53 AM
HP deskjet 882c printer will not work john Hardware and Windows XP 3 September 22nd 04 03:18 PM
Long boot pause with SATA boot drive Randy General XP issues or comments 3 September 1st 04 12:44 AM






All times are GMT +1. The time now is 11:57 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.