Network 2 printers on 1 WinXP and 1 Mac OS 10

Setup: Win XP with HP LaserJet 4L direct wired to it, 1 MAC OS 10 with Epson
CX7000F direct wired to it. XP is linked via Lynksys modem and the Mac is
linked by direct cable to same modem. How can I network so both computers
can access both printers?

Russ M wrote:

Setup: Win XP with HP LaserJet 4L direct wired to it, 1 MAC OS 10 with
Epson CX7000F direct wired to it. XP is linked via Lynksys modem and the
Mac is
linked by direct cable to same modem. How can I network so both computers
can access both printers?

You need to set up sharing between the two computers. Here are a few tips:

*****
For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).

Problems sharing files between computers on a network are generally caused
by 1) a misconfigured firewall or overlooked firewall (including a stateful
firewall in a VPN); or 2) inadvertently running two firewalls such as the
built-in Windows Firewall and a third-party firewall; and/or 3) not having
identical user accounts and passwords on all Workgroup machines; 4) trying
to create shares where the operating system does not permit it.

A. Configure firewalls on all machines to allow the Local Area Network (LAN)
traffic as trusted. With Windows Firewall, this means allowing File/Printer
Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
XP will take care of this for those machines.The only "gotcha" is that this
will turn on the XPSP2 Windows Firewall. If you aren't running a
third-party firewall or have an antivirus with "Internet Worm
Protection" (like Norton 2006/07) which acts as a firewall, then you're
fine. With third-party firewalls, I usually configure the LAN allowance
with an IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you
would substitute your correct subnet. Do not run more than one firewall. DO
NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.

B. For ease of organization, put all computers in the same Workgroup. This
is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do not
need to be logged into the same account on all machines and the passwords
assigned to each user account can be different; the accounts/passwords just
need to exist and match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
to the Desktop (into one particular user's account) for convenience, you
can do this. The instructions at this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

D. If one or more of the computers is XP Pro or Media Center, turn off
Simple File Sharing (Folder OptionsView tab).
*****
Don't forget to share out the printers. Aside from creating the matching
user accounts/passwords on the Mac, sharing on OS X is easy to do. Look in
System Preferences under Sharing and check your Firewall under Security. If
you have Leopard, use the SMB protocol, not AFP.

Of course you will also need to install the correct printer drivers on each
machine. Get them from the printer mftrs.' websites.

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
FAQ - http://www.elephantboycomputers.com/#FAQ