If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
C:\i386 folder
My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure
and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? Thank you! Jo-Anne |
Ads |
#2
|
|||
|
|||
C:\i386 folder
Jo-Anne wrote:
My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#3
|
|||
|
|||
C:\i386 folder
Thank you, Shenan! But how do I turn it off so it won't run at Startup? I
tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#4
|
|||
|
|||
C:\i386 folder
Delete the shortcut in Start All Programs Startup If you still can't find out where it's starting (but that's where it installed itself for me), download and run Autoruns, which shows a comprehensive list of everything that starts up. http://technet.microsoft.com/en-us/s.../bb963902.aspx Jo-Anne wrote: Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. http://en.wikipedia.org/wiki/Apollo_Guidance_Computer http://history.nasa.gov/afj/compessay.htm |
#5
|
|||
|
|||
C:\i386 folder
start run msconfig. you can enable and disable startup programs here. you can
also remove it from the run key in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run either way works. Do not delete those files. they are important to windows. "Jo-Anne" wrote: Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#6
|
|||
|
|||
C:\i386 folder
Open Secunia PSI and click on Advance next to Interface Mode in the upper
right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#7
|
|||
|
|||
C:\i386 folder
Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray
on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#8
|
|||
|
|||
C:\i386 folder
Thank you, Lem! After I followed Nepatsfam's suggestion about working within
the program, I checked Start All Programs Startup, and it was empty (which is strange, since several programs begin at Startup). Jo-Anne "Lem" lemp40@unknownhost wrote in message ... Delete the shortcut in Start All Programs Startup If you still can't find out where it's starting (but that's where it installed itself for me), download and run Autoruns, which shows a comprehensive list of everything that starts up. http://technet.microsoft.com/en-us/s.../bb963902.aspx Jo-Anne wrote: Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. http://en.wikipedia.org/wiki/Apollo_Guidance_Computer http://history.nasa.gov/afj/compessay.htm |
#9
|
|||
|
|||
C:\i386 folder
Thank you! The program is disabled in Startup now--but see my response to
Nepatsfan about how it reinstalls itself in the system tray. Jo-Anne "thehman" wrote in message ... start run msconfig. you can enable and disable startup programs here. you can also remove it from the run key in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run either way works. Do not delete those files. they are important to windows. "Jo-Anne" wrote: Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#10
|
|||
|
|||
C:\i386 folder
The date and time was 12/11/2008 4:12 PM, and on a whim, Jo-Anne pounded
out on the keyboard: Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html Hi Jo-Anne, Is the icon only there while the program is running? If you close it does it disappear? If so, it was probably designed that way to let you know it was "working". Also, if you have Windows SP3 installed, the c:\i386 folder may be an old version. What are the dates of the average files? If most are 04/13/2008 - 04/14/2008, they are SP3 files. If they're older, they're not. Check to see if you don't already have the SP3 files usually located he C:\WINDOWS\ServicePackFiles\i386 If so, you don't need the c:\i386 folder any longer. -- Terry R. ***Reply Note*** Anti-spam measures are included in my email address. Delete NOSPAM from the email address after clicking Reply. |
#11
|
|||
|
|||
C:\i386 folder
"Terry R." wrote in message
... The date and time was 12/11/2008 4:12 PM, and on a whim, Jo-Anne pounded out on the keyboard: Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html Hi Jo-Anne, Is the icon only there while the program is running? If you close it does it disappear? If so, it was probably designed that way to let you know it was "working". Also, if you have Windows SP3 installed, the c:\i386 folder may be an old version. What are the dates of the average files? If most are 04/13/2008 - 04/14/2008, they are SP3 files. If they're older, they're not. Check to see if you don't already have the SP3 files usually located he C:\WINDOWS\ServicePackFiles\i386 If so, you don't need the c:\i386 folder any longer. -- Terry R. ***Reply Note*** Anti-spam measures are included in my email address. Delete NOSPAM from the email address after clicking Reply. Thank you, Terry! Unfortunately, the Secunia icon stays in the system tray even after the program is closed. Re SP3, yes, I do have a C:\WINDOWS\ServicePackFiles\i386 folder. Do I really dare delete the C:\i386 folder????!! Thank you again! Jo-Anne |
#12
|
|||
|
|||
C:\i386 folder
Jo-Anne wrote:
"Terry R." wrote in message ... The date and time was 12/11/2008 4:12 PM, and on a whim, Jo-Anne pounded out on the keyboard: Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html Hi Jo-Anne, Is the icon only there while the program is running? If you close it does it disappear? If so, it was probably designed that way to let you know it was "working". Also, if you have Windows SP3 installed, the c:\i386 folder may be an old version. What are the dates of the average files? If most are 04/13/2008 - 04/14/2008, they are SP3 files. If they're older, they're not. Check to see if you don't already have the SP3 files usually located he C:\WINDOWS\ServicePackFiles\i386 If so, you don't need the c:\i386 folder any longer. -- Terry R. ***Reply Note*** Anti-spam measures are included in my email address. Delete NOSPAM from the email address after clicking Reply. Thank you, Terry! Unfortunately, the Secunia icon stays in the system tray even after the program is closed. Re SP3, yes, I do have a C:\WINDOWS\ServicePackFiles\i386 folder. Do I really dare delete the C:\i386 folder????!! Thank you again! Jo-Anne I haven't used Secunia PSI all that long, but as far as I can tell, even if you uncheck the box to "Enable program monitoring," the only way to stop the program after it has completed its scan is to right-click the System Tray icon and select "Exit." If I were you, I would *not* delete c:\i386. It's a little surprising that Secunia finds anything there anyway -- other than a few basic system utilities, most of the files in C:\i386 should be compressed and not recognizable as "exe" files. What files is Secunia complaining about? -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. http://en.wikipedia.org/wiki/Apollo_Guidance_Computer http://history.nasa.gov/afj/compessay.htm |
#13
|
|||
|
|||
C:\i386 folder
"Lem" lemp40@unknownhost wrote in message
... Jo-Anne wrote: "Terry R." wrote in message ... The date and time was 12/11/2008 4:12 PM, and on a whim, Jo-Anne pounded out on the keyboard: Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html Hi Jo-Anne, Is the icon only there while the program is running? If you close it does it disappear? If so, it was probably designed that way to let you know it was "working". Also, if you have Windows SP3 installed, the c:\i386 folder may be an old version. What are the dates of the average files? If most are 04/13/2008 - 04/14/2008, they are SP3 files. If they're older, they're not. Check to see if you don't already have the SP3 files usually located he C:\WINDOWS\ServicePackFiles\i386 If so, you don't need the c:\i386 folder any longer. -- Terry R. ***Reply Note*** Anti-spam measures are included in my email address. Delete NOSPAM from the email address after clicking Reply. Thank you, Terry! Unfortunately, the Secunia icon stays in the system tray even after the program is closed. Re SP3, yes, I do have a C:\WINDOWS\ServicePackFiles\i386 folder. Do I really dare delete the C:\i386 folder????!! Thank you again! Jo-Anne I haven't used Secunia PSI all that long, but as far as I can tell, even if you uncheck the box to "Enable program monitoring," the only way to stop the program after it has completed its scan is to right-click the System Tray icon and select "Exit." If I were you, I would *not* delete c:\i386. It's a little surprising that Secunia finds anything there anyway -- other than a few basic system utilities, most of the files in C:\i386 should be compressed and not recognizable as "exe" files. What files is Secunia complaining about? -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. http://en.wikipedia.org/wiki/Apollo_Guidance_Computer http://history.nasa.gov/afj/compessay.htm Thank you, Lem! I guess I'll just continue exiting the program from the system tray. That does work. And I won't try deleting C:\i386. Some examples of files that Secunia found in the i386 folder on my new laptop: Macromedia Flash Player 4.x (ActiveX Control) at c:\i386\swflash.ocx Adobe Flash Player 9.x (ActiveX Control) at c:\i386\Flash9e.ocx Microsoft Data Access Components (MDAC) 2.x at c:\i386\msadox.dll Microsoft XML Core Services (MSXML) 6.x at c:\i386\msxml6.dll Sun Java JRE 1.6.x / 6.x (Requires uninstall) at c:\i386\java.exe I told it to ignore them. Thank you again, Jo-Anne |
#14
|
|||
|
|||
C:\i386 folder
As has already been pointed out, once you finish running a scan with Secunia
PSI you'll need to right click on the notification tray icon and select Exit from the program to shut it down completely. Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html |
#15
|
|||
|
|||
C:\i386 folder
"Jo-Anne" Jo-AnneATnowhere.com wrote in message ... "Lem" lemp40@unknownhost wrote in message ... Jo-Anne wrote: "Terry R." wrote in message ... The date and time was 12/11/2008 4:12 PM, and on a whim, Jo-Anne pounded out on the keyboard: Thank you, Nepatsfan! That worked to keep Secunia PSI out of the system tray on Startup. However, once I open the program, it installs itself in the system tray and continues giving me balloon information I don't want. Is there any way to stop it from settling into the system tray? (I asked in the Secunia forums but never got an answer.) All I want to do is run the scans when I choose to do so and deal with the results myself. Jo-Anne "Nepatsfan" wrote in message ... Open Secunia PSI and click on Advance next to Interface Mode in the upper right hand corner of the window. Click on the Settings tab. Uncheck "Start the Secunia PSI on boot" and "Enable program monitoring". Close the program and restart your computer to make sure it no longer runs on start up. Good luck Nepatsfan "Jo-Anne" Jo-AnneATnowhere.com wrote in message ... Thank you, Shenan! But how do I turn it off so it won't run at Startup? I tried unchecking it in msconfig, but it just keeps re-creating itself. Jo-Anne "Shenan Stanley" wrote in message ... Jo-Anne wrote: My system is WinXP SP3. Secunia PSI keeps informing me that I have insecure and out-of-date files in the C:\i386 folder. From what I've read, it looks like this folder is essentially the original setup of the computer--what would be used to restore it if I didn't have an installation CD. I'm guessing that this means the files are never updated. To deal with the constant reminders by Secunia, I see two options: delete the indicated files or tell Secunia to ignore them. My choice would be to ignore them. Does that sound reasonable? You could also update these files... But telling Secunia to ignore them is fine. (Personally - I would turn off Secunia and run it every-so-often instead of having it run at startup.) -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html Hi Jo-Anne, Is the icon only there while the program is running? If you close it does it disappear? If so, it was probably designed that way to let you know it was "working". Also, if you have Windows SP3 installed, the c:\i386 folder may be an old version. What are the dates of the average files? If most are 04/13/2008 - 04/14/2008, they are SP3 files. If they're older, they're not. Check to see if you don't already have the SP3 files usually located he C:\WINDOWS\ServicePackFiles\i386 If so, you don't need the c:\i386 folder any longer. -- Terry R. ***Reply Note*** Anti-spam measures are included in my email address. Delete NOSPAM from the email address after clicking Reply. Thank you, Terry! Unfortunately, the Secunia icon stays in the system tray even after the program is closed. Re SP3, yes, I do have a C:\WINDOWS\ServicePackFiles\i386 folder. Do I really dare delete the C:\i386 folder????!! Thank you again! Jo-Anne I haven't used Secunia PSI all that long, but as far as I can tell, even if you uncheck the box to "Enable program monitoring," the only way to stop the program after it has completed its scan is to right-click the System Tray icon and select "Exit." If I were you, I would *not* delete c:\i386. It's a little surprising that Secunia finds anything there anyway -- other than a few basic system utilities, most of the files in C:\i386 should be compressed and not recognizable as "exe" files. What files is Secunia complaining about? -- Lem -- MS-MVP To the moon and back with 2K words of RAM and 36K words of ROM. http://en.wikipedia.org/wiki/Apollo_Guidance_Computer http://history.nasa.gov/afj/compessay.htm Thank you, Lem! I guess I'll just continue exiting the program from the system tray. That does work. And I won't try deleting C:\i386. Some examples of files that Secunia found in the i386 folder on my new laptop: Macromedia Flash Player 4.x (ActiveX Control) at c:\i386\swflash.ocx Adobe Flash Player 9.x (ActiveX Control) at c:\i386\Flash9e.ocx Microsoft Data Access Components (MDAC) 2.x at c:\i386\msadox.dll Microsoft XML Core Services (MSXML) 6.x at c:\i386\msxml6.dll Sun Java JRE 1.6.x / 6.x (Requires uninstall) at c:\i386\java.exe I told it to ignore them. Thank you again, Jo-Anne Well if that was my computer I would uninstall (if possible) those old versions listed and then DELETE any remaining remnants of them from the i386 folder. I like Secunia's efforts to keep us all safe and up-to-date. Doug W. - |
|
Thread Tools | |
Display Modes | |
|
|