If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
xp pro duplicating drives on computer
First let me be clear I am a noobie / hobbyist when it comes to building and
programming computers so please be patient with me. I'm having a problem with my computer rig. Recently received a small multi drive unit. At first everything worked flawlessly. Now Xp is creating duplicate or mirroring the drives in the small multi drive unit. So instead of having 5 drives it's listing 10 in the windows explorer. I went into computer management window and entered the drive management screen. All five are listed and are not duplicated. How can I get XP to recognize only the five drives without having to wipe the drives, backing up by buying a external drive, or canning the drives all together. Problem is there is a ton of data on each drive. I don't want to lose the data? A friend explained it may be the raid parameters are off. However when in the bios I can't find the screen letting me adjust it. Here's my specs at a glance Master unit: Biostar m7ncd motherboard AMD athlon 2200 cpu 1.5 gig ram hp 420n rw-dvd generic rw-dvd XFX geforce 5500 128mb audicy platinum ex adaptec 160 pin scsi adapter slave unit: 5 multiple drives 30-75gig each separate power source |
Ads |
#2
|
|||
|
|||
xp pro duplicating drives on computer
On Sat, 31 Oct 2009 10:33:01 -0700, gianucci
wrote: First let me be clear I am a noobie / hobbyist when it comes to building and programming computers so please be patient with me. I'm having a problem with my computer rig. Recently received a small multi drive unit. At first everything worked flawlessly. Now Xp is creating duplicate or mirroring the drives in the small multi drive unit. So instead of having 5 drives it's listing 10 in the windows explorer. I went into computer management window and entered the drive management screen. All five are listed and are not duplicated. How can I get XP to recognize only the five drives without having to wipe the drives, backing up by buying a external drive, or canning the drives all together. Problem is there is a ton of data on each drive. I don't want to lose the data? A friend explained it may be the raid parameters are off. However when in the bios I can't find the screen letting me adjust it. Here's my specs at a glance Master unit: Biostar m7ncd motherboard AMD athlon 2200 cpu 1.5 gig ram hp 420n rw-dvd generic rw-dvd XFX geforce 5500 128mb audicy platinum ex adaptec 160 pin scsi adapter slave unit: 5 multiple drives 30-75gig each separate power source With respect , if you are a noobie ; why a raid array ? |
#3
|
|||
|
|||
xp pro duplicating drives on computer
1st read the owners manual.Then chk out the pc BIOS & confirm that
RAID is activated,plus set to use with IDE devices if you have them.Once thru,on all pc starts and pc restarts,the RAID utility is shown,press the correct keys & enter it.Also,since RAID probably isnt running,once youve set the pc for it,install the RAID software,this gives all the settings for you to see + you'll need the drivers for xp... "gianucci" wrote: First let me be clear I am a noobie / hobbyist when it comes to building and programming computers so please be patient with me. I'm having a problem with my computer rig. Recently received a small multi drive unit. At first everything worked flawlessly. Now Xp is creating duplicate or mirroring the drives in the small multi drive unit. So instead of having 5 drives it's listing 10 in the windows explorer. I went into computer management window and entered the drive management screen. All five are listed and are not duplicated. How can I get XP to recognize only the five drives without having to wipe the drives, backing up by buying a external drive, or canning the drives all together. Problem is there is a ton of data on each drive. I don't want to lose the data? A friend explained it may be the raid parameters are off. However when in the bios I can't find the screen letting me adjust it. Here's my specs at a glance Master unit: Biostar m7ncd motherboard AMD athlon 2200 cpu 1.5 gig ram hp 420n rw-dvd generic rw-dvd XFX geforce 5500 128mb audicy platinum ex adaptec 160 pin scsi adapter slave unit: 5 multiple drives 30-75gig each separate power source |
Thread Tools | |
Display Modes | |
|
|