A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Hardware and Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

convert USB2.0 to USB1.1



 
 
Thread Tools Display Modes
  #1  
Old December 23rd 07, 08:46 PM posted to microsoft.public.windowsxp.hardware
Tutu
external usenet poster
 
Posts: 1
Default convert USB2.0 to USB1.1

I have a USB analyzer which can only capture Data for upto 12Mbit/
s. When I connect a device which has a USB2.0 protocol on it, the USB
Analyzer is not able to catch this information. How can I force one of
my computer ports to work as USB 1.1? Is there a way? Thanks in
advance.
Ads
  #2  
Old December 23rd 07, 09:19 PM posted to microsoft.public.windowsxp.hardware
Paul
external usenet poster
 
Posts: 18,275
Default convert USB2.0 to USB1.1

Tutu wrote:
I have a USB analyzer which can only capture Data for upto 12Mbit/
s. When I connect a device which has a USB2.0 protocol on it, the USB
Analyzer is not able to catch this information. How can I force one of
my computer ports to work as USB 1.1? Is there a way? Thanks in
advance.


You could try the following.

Go to Device Manager. Find the USB section. One of the USB entries
has the word "Enhanced" in it. Select that entry. Do "properties"
on it. At the bottom of the Properties for the Enhanced entry,
there is a "Device Usage" box. It has values like

Use this device (enable)
Do not use this device (disable)

Change the setting to "disable".

Then try your analyzer. That is what I'd try.

It is also possible, that USB2 could be disabled in the
BIOS, but not all BIOS have the same control features
listed on the screen.

You should notice a visible different in UVCView after you do
that also. A bunch of entries should disappear near the bottom.
I would close UVCView, before you start the process of changing
the Device Manager. Once the change is made in Device Manager,
run UVCView again, and the USB2 section should be gone. (On my
ICH5 Southbridge, the USB2 entries are near the bottom of the
UVCView window.)

http://www.microsoft.com/whdc/device...VCViewdwn.mspx

My best guess,
Paul
  #3  
Old December 24th 07, 11:41 PM posted to microsoft.public.windowsxp.hardware
RalfG[_2_]
external usenet poster
 
Posts: 171
Default convert USB2.0 to USB1.1

You could try connecting it through an external USB 1.1 hub to the PC.

"Tutu" wrote in message
...
I have a USB analyzer which can only capture Data for upto 12Mbit/
s. When I connect a device which has a USB2.0 protocol on it, the USB
Analyzer is not able to catch this information. How can I force one of
my computer ports to work as USB 1.1? Is there a way? Thanks in
advance.



  #4  
Old April 1st 11, 02:45 AM posted to microsoft.public.windowsxp.hardware
O-Yes G
external usenet poster
 
Posts: 1
Default convert USB2.0 to USB1.1

It is posible to change usb protocole from BIOS
For this porpse firt Make backup of your bios
then extract bios.bin file in your working folder
identify the usb bus file that contan usb codes just like Processor codes( When u update Processor Code it run fast & smoth) change the usb protocole/Code file
with high speed USB 2.0 Codes file ( extractin from other pc that contan high speed usb )
repack bios.bin file then flash into the pc
restart pc you are notes ur usb bus detet as high speed
b/c all type of bus rate depend on BIOS that contain first startup drivers/codes.
You also develp our own code for USB or other Hardware.


I test on many typeof motherboard
my first exparement on (intel 810 lmrt)
2nd (810 DST) then (810 Mini), (815) , etc


On Sunday, December 23, 2007 3:19 PM Paul wrote:


Tutu wrote:

You could try the following.

Go to Device Manager. Find the USB section. One of the USB entries
has the word "Enhanced" in it. Select that entry. Do "properties"
on it. At the bottom of the Properties for the Enhanced entry,
there is a "Device Usage" box. It has values like

Use this device (enable)
Do not use this device (disable)

Change the setting to "disable".

Then try your analyzer. That is what I'd try.

It is also possible, that USB2 could be disabled in the
BIOS, but not all BIOS have the same control features
listed on the screen.

You should notice a visible different in UVCView after you do
that also. A bunch of entries should disappear near the bottom.
I would close UVCView, before you start the process of changing
the Device Manager. Once the change is made in Device Manager,
run UVCView again, and the USB2 section should be gone. (On my
ICH5 Southbridge, the USB2 entries are near the bottom of the
UVCView window.)

http://www.microsoft.com/whdc/device...VCViewdwn.mspx

My best guess,
Paul



On Monday, December 24, 2007 12:15 AM Tutu wrote:


I have a USB analyzer which can only capture Data for upto 12Mbit/
s. When I connect a device which has a USB2.0 protocol on it, the USB
Analyzer is not able to catch this information. How can I force one of
my computer ports to work as USB 1.1? Is there a way? Thanks in
advance.



On Monday, December 24, 2007 5:41 PM RalfG wrote:


You could try connecting it through an external USB 1.1 hub to the PC.




  #5  
Old April 1st 11, 01:34 PM posted to microsoft.public.windowsxp.hardware
Jack Toff
external usenet poster
 
Posts: 57
Default convert USB2.0 to USB1.1

On 3/31/2011 8:45 PM, O-Yes G wrote:
December 23, 2007

Replying to a post from 2007? What an idiot.
  #6  
Old April 1st 11, 11:59 PM posted to microsoft.public.windowsxp.hardware
Twayne[_2_]
external usenet poster
 
Posts: 4,276
Default convert USB2.0 to USB1.1

In ,
Jack Toff typed:
On 3/31/2011 8:45 PM, O-Yes G wrote:
December 23, 2007

Replying to a post from 2007? What an idiot.


Why? It's a valid query that was not answered and now is. When you look at
Google ALL of the posts, including the belated correct response, will be
there for those doing the research. Nearly every e-mail in the free world is
stored at Google and other such repositories for perpetuity.

HTH,

Twayne`


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off






All times are GMT +1. The time now is 05:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 PCbanter.
The comments are property of their posters.