If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#16
|
|||
|
|||
Windows Service Pack 2 Error
nass,
I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
Ads |
#17
|
|||
|
|||
Windows Service Pack 2 Error
nass,
I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#18
|
|||
|
|||
Windows Service Pack 2 Error
Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#19
|
|||
|
|||
Windows Service Pack 2 Error
Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#20
|
|||
|
|||
Windows Service Pack 2 Error
"Tom B." wrote in message
... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#21
|
|||
|
|||
Windows Service Pack 2 Error
"Tom B." wrote in message
... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#22
|
|||
|
|||
Windows Service Pack 2 Error
It's a different one. I don't get that same code anymore. Now it just says I
need to install SP3 or something. Thanks for all your help. Tom "nass" wrote: Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#23
|
|||
|
|||
Windows Service Pack 2 Error
It's a different one. I don't get that same code anymore. Now it just says I
need to install SP3 or something. Thanks for all your help. Tom "nass" wrote: Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#24
|
|||
|
|||
Windows Service Pack 2 Error
Hey Daave.
So I installed SP3 last night. No huge problems. It was a trial and error ordeal at first. Initially, I couldn't disable my peripherals. Wouldn't let me until I did the Clean Boot thing. That was frustrating. Besides that, everything worked smooth. I cleared up about 6.5 G's hard drive space and that was plenty. Here's one weird thing that's going on. When I attempt to log in to Microsoft Newsgroup, after entering my password, I get the Page Cannot Be Displayed page and I have to hit the back button three times, and then I'm logged in. Weird, huh? Besides that, everything seems cool. Thanks for all your invaluable assistance. Sincerely, Tom "Daave" wrote: "Tom B." wrote in message ... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#25
|
|||
|
|||
Windows Service Pack 2 Error
Hey Daave.
So I installed SP3 last night. No huge problems. It was a trial and error ordeal at first. Initially, I couldn't disable my peripherals. Wouldn't let me until I did the Clean Boot thing. That was frustrating. Besides that, everything worked smooth. I cleared up about 6.5 G's hard drive space and that was plenty. Here's one weird thing that's going on. When I attempt to log in to Microsoft Newsgroup, after entering my password, I get the Page Cannot Be Displayed page and I have to hit the back button three times, and then I'm logged in. Weird, huh? Besides that, everything seems cool. Thanks for all your invaluable assistance. Sincerely, Tom "Daave" wrote: "Tom B." wrote in message ... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#26
|
|||
|
|||
Windows Service Pack 2 Error
Dear nass,
I installed SP3 last night with no major problems. I wanted to thank you for your gracious help. It was greatly appreciated. Your suggestion to delete the subfolders in Windows/Software Distribution and to execute that .bat file were extremely helpful. I cleared up about 6.5 G's of hard drive space for the procedure, which was plenty. Thank you again. Sincerely, Tom "nass" wrote: Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#27
|
|||
|
|||
Windows Service Pack 2 Error
Dear nass,
I installed SP3 last night with no major problems. I wanted to thank you for your gracious help. It was greatly appreciated. Your suggestion to delete the subfolders in Windows/Software Distribution and to execute that .bat file were extremely helpful. I cleared up about 6.5 G's of hard drive space for the procedure, which was plenty. Thank you again. Sincerely, Tom "nass" wrote: Hi Tom, Daave is a greate helper in the Ms newsgroups and what he told is a good advice concerning the Hard drive space, which I didn't know about from you. If you moved your Docs, Pictures and the data to the other Partition and made a space then try the Dial a fix tool and install SP3 then IE7. Does it give you the same Error message or different one? HTH, nass --- http://www.nasstec.co.uk "Tom B." wrote: nass, I took your advice and deleted the subfolders in C:\WINDOWS\SoftwareDistribution. I ran that .bat file you gave me. I downloaded all the updates and they downloaded OK. I then attempted to download SP2 again, and it STOPPED AGAIN 3/4 of the way through! How frustrating! I read that page you gave me on Dial-A-Fix. It seems like a potentially risky tool that could really screw things up. The disclaimers went on for so long, I just stopped reading. But then again, it also seemed like it had great potential to solve my problem. I was thinking now I should maybe take this other responders advice and download SP3 instead? What do you know about Dial-A-Fix. I just don't want to create more problems by running that tool. Tom B. "nass" wrote: "Tom B." wrote: I have never installed Service Pack 2 because I always get an error 3/4 of the way through installation. My system has worked fine without it up until now. Now I'm having real browser problems and stuff. Every time I have ever attempted to download SP2, the error message code is Error Code: 0x80070080. How do I rectify this? I really want to upgrade my service pack. Thanks. Hi Tom, Open a Run command and type in: cmd.exe click [OK] on the command prompt type: net stop wuauserv press Enter Key on your keyboard then type this command: net stop bits Type Exit to exit the command prompt. Open Windows Explorer and locate this folder: C:\WINDOWS\SoftwareDistribution = delete all subfolders in the right pane/window. Note if you can't see this directory try show hidden files and folders from tools menu. Run disk clean up and register these command. Try to copy an dpaste into a Notepad and safe as updates.bat on your Desktop then double click it to execute the batch file. regsvr32 wuweb.dll regsvr32 wuapi.dll regsvr32 wuaueng1.dll regsvr32 wuaueng.dll regsvr32 wups2.dll regsvr32 wups.dll regsvr32 wucltui.dll net start wuauserv net start bits Reboot your machine and try the updates. Does it help? If still no joy try this tool: Dial-a-fix http://wiki.lunarsoft.net/wiki/Dial-a-fix Note: make sure the machine malware/virus free and there is no Security software interfering with the updates rendering it useless/damaged. HTH, nass --- http://www.nasstec.co.uk |
#28
|
|||
|
|||
Windows Service Pack 2 Error
Glad to hear you had success!
"Tom B." wrote in message ... Hey Daave. So I installed SP3 last night. No huge problems. It was a trial and error ordeal at first. Initially, I couldn't disable my peripherals. Wouldn't let me until I did the Clean Boot thing. That was frustrating. Besides that, everything worked smooth. I cleared up about 6.5 G's hard drive space and that was plenty. Here's one weird thing that's going on. When I attempt to log in to Microsoft Newsgroup, after entering my password, I get the Page Cannot Be Displayed page and I have to hit the back button three times, and then I'm logged in. Weird, huh? Besides that, everything seems cool. Thanks for all your invaluable assistance. Sincerely, Tom "Daave" wrote: "Tom B." wrote in message ... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#29
|
|||
|
|||
Windows Service Pack 2 Error
Glad to hear you had success!
"Tom B." wrote in message ... Hey Daave. So I installed SP3 last night. No huge problems. It was a trial and error ordeal at first. Initially, I couldn't disable my peripherals. Wouldn't let me until I did the Clean Boot thing. That was frustrating. Besides that, everything worked smooth. I cleared up about 6.5 G's hard drive space and that was plenty. Here's one weird thing that's going on. When I attempt to log in to Microsoft Newsgroup, after entering my password, I get the Page Cannot Be Displayed page and I have to hit the back button three times, and then I'm logged in. Weird, huh? Besides that, everything seems cool. Thanks for all your invaluable assistance. Sincerely, Tom "Daave" wrote: "Tom B." wrote in message ... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
#30
|
|||
|
|||
Windows Service Pack 2 Error
Here's one last problem. After I downloaded SP3 and upgraded to IE7, the IE
icon that's to the far left of the URL, and is next to every IE Bookmark on your Favorites, is not the IE icon anymore. It's that weird icon you get when you have a file, but no program to support it? Know what I mean? It's white colored and it looks like a corner of a piece of paper is folded over? Get me? How do I get the IE icon back on the address bar next to the URL, and in my Bookmarks? Thanks. Tom "Daave" wrote: Glad to hear you had success! "Tom B." wrote in message ... Hey Daave. So I installed SP3 last night. No huge problems. It was a trial and error ordeal at first. Initially, I couldn't disable my peripherals. Wouldn't let me until I did the Clean Boot thing. That was frustrating. Besides that, everything worked smooth. I cleared up about 6.5 G's hard drive space and that was plenty. Here's one weird thing that's going on. When I attempt to log in to Microsoft Newsgroup, after entering my password, I get the Page Cannot Be Displayed page and I have to hit the back button three times, and then I'm logged in. Weird, huh? Besides that, everything seems cool. Thanks for all your invaluable assistance. Sincerely, Tom "Daave" wrote: "Tom B." wrote in message ... Allright Daave. Here's what's happening. I utilized the information given by both you and the other responder named nass. I deleted the subfolders in C:\WINDOWS\SoftwareDistribution. It's important that you do this proper way. This is how you should do it: (Courtesy of PA Bear) 1. Stop the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Stop (Stopping the service will take a moment) [note: this should accomplish the same thing that nass told you to do with the net start wuauserv and net start bits commands] 2. Delete the contents of the Download folder: Start Run (type in) %windir%\SoftwareDistribution [OK] Open the Download folder and delete its contents Close the window. [or you can show hidden files and navigate to C:\WINDOWS\SofwareDistribution\Download and manually delete all of the subfolder's content -- thank you, MowGreen! -- make sure you empty the Recylce Bin] 3. Start the Automatic Updates service: Start Run (type in) services.msc [OK] Double-click Automatic Updates Click on Start (Starting the service will take a moment) Personally, I hate Automatic Updates, so I do the following: Start | Control Panel | Automatic Updates: Turn off Automatic Updates In fact, doing this *before* Step 1 will probably work better, assuming you currently have either the "Automatic (recommended)" or "Download updates for me, but..." setting selected. Once everything is the way you want it, you'll be much happier if you later change this setting to "Notify me, but don't automatically download or install them." This will give you more control, and you'll never again get the type of situation you currently find yourself in. Finally, I would only download and install *Critical* updates. Once I did that, I executed that .bat file. I cleared up alot of space on my hard drive by transferring mp3's and mpeg's over to my external drive. Good. Still need more info, though. How large is your C: drive and how much free space do you have on it? I downloaded all the updates, and they downloaded fine. "All the updates?" That troubles me. If your goal is to install either SP2 or SP3 (and as I suggested before, you'll be a lot better off installing SP3, since it includes SP2 plus a whole mess of subsequent updates), then you shouldn't be installing updates for SP1. It won't necessarily hurt anything, but it sure is a waste of time and effort! I then attempted to download SP2 once more, and THE SAME THING HAPPENED AGAIN! It stopped 3/4 of the way through, and I had to shut the whole deal down. It is almost always best to download the standalone installer and install offline. My guess is you have some program running (probably antivirus) that is interfering with your download. If you look at my other post, you will see that configuring a clean boot eliminates this issue. Once more, since you are going through all this effort and since you will need to install SP3 in the not-too-distant future *anyway*, you might as well download and install SP3. You may download the standalone installation file WindowsXP-KB936929-SP3-x86-ENU.exe from: http://www.microsoft.com/DownLoads/d...displaylang=en If, instead, you want to create your own Service Pack 3 installation *CD*, you may download the .iso file from http://www.microsoft.com/DownLoads/d...displaylang=en and burn the CD from the .iso file (most CD burning programs will do this, including Nero and CDBurnerXP). But either method will work fine, and it's a lot better than relying on Windows Update! Argghhh!! I feel like I'm in this weird limbo inbetween SP's right now. I ran disk cleanup and cleared out all that failed SP2 stuff. Now I guess I'm ready to try and download SP3. I don't seem to have a choice here. You have a choice. But IMO it's wiser to upgrade to SP3 directly. What do you know about that Dial-A-Fix tool? I read this info link and it seems risky to me? http://wiki.lunarsoft.net/wiki/Dial-a-fix It might address your problem. It shouldn't hurt. But nothing is foolproof. If you are worried, at the very least create a System Restore point. Better: make an image of your C: drive, which I would do anyway before undertaking any significant upgrade (like upgrading to SP23). I'll go ahead with the SP3 download after I hear back from you. Good luck. Please keep us posted. |
Thread Tools | |
Display Modes | |
|
|