If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#16
|
|||
|
|||
4.7 messenger audio
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
Ads |
#17
|
|||
|
|||
4.7 messenger audio
Problem may be on their end.
Joel "Meg" wrote in message ... I have the same problem with Audio and Video. I can hear and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#18
|
|||
|
|||
4.7 messenger audio
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#19
|
|||
|
|||
4.7 messenger audio
Problem may be on their end.
Joel "Meg" wrote in message ... I have the same problem with Audio and Video. I can hear and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#20
|
|||
|
|||
4.7 messenger audio
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#21
|
|||
|
|||
4.7 messenger audio
I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#22
|
|||
|
|||
4.7 messenger audio
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#23
|
|||
|
|||
4.7 messenger audio
I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#24
|
|||
|
|||
4.7 messenger audio
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#25
|
|||
|
|||
4.7 messenger audio
Problem may be on their end.
Joel "Meg" wrote in message ... I have the same problem with Audio and Video. I can hear and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#26
|
|||
|
|||
4.7 messenger audio
I dont hear myself in the speakers, so that all seems
fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#27
|
|||
|
|||
4.7 messenger audio
I assume that the audio/video wizard runs properly!!! Does it??? Then are
you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . |
#28
|
|||
|
|||
4.7 messenger audio
I have the same problem with Audio and Video. I can hear
and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
#29
|
|||
|
|||
4.7 messenger audio
Problem may be on their end.
Joel "Meg" wrote in message ... I have the same problem with Audio and Video. I can hear and see them, but they can't hear or see me. I can see my picture-in-picture and my wizard seems fine. Any solution today? -----Original Message----- I assume that the audio/video wizard runs properly!!! Does it??? Then are you certain that the mic is connected to the sound card and that is what is being selected during the running of the Wizard. If anything other than that, I would expect you to have problems. Joel "steve" wrote in message ... I dont hear myself in the speakers, so that all seems fine. Tried it again today and found the other end still cant hear me? I dont think i'll ever get to the bottom of this! Steve -----Original Message----- You should NEVER HEAR YOURSELF IN YOUR SPEAKERS. If you do then the system is misconfigured. Double click the little speaker/sound system icon in the System Tray and then select Options/Properties, and make sure the Microphone is NOT CHECKED IN THE PLAYBACK MODE, BUT IS CHECKED IN THE RECORD MODE. Joel "steve" wrote in message ... id rather not run the risk of funy people contacting me but if you can think of anything else i'd apprecite it. Also i notice that you say in the sound icon to uncheck the mic in the playback mode. this does not seem to do anything. This just allows your voice to be heard through the speakers? I know my mic works as it works perfectly through yahoo messenger. this hs been really bugging me for some time now and just dont seem to get to the bottom of it. I have contacted several people through messenger and it is always the same. I can hear them but they dont need me. Please dont give up on me yet Thanks Steve -----Original Message----- Well, if the video goes thru, then I really do not have a answer, unless the other end does not have their system configured properly. I would send you my address, but there is too many funny people out there and I don't need the spam. Altho, my ISP catches all spam and viruses and stops them at their server. If you care to risk the spam you can post your Messenger address and we can try that, but of course you may get some real funny people contacting you. Joel "steve" wrote in message ... The wizard all seems to be working fine and i get the lines from the mic when testing. sound does not seem to want to go through to the other end? Steve -----Original Message----- What happens when you run the Audio/Video Tuning Wizard? Joel "steve" wrote in message ... This seems to be such a common fault but when i use the mic icanhear them but they cannot hear me. Any suggestions??? . . . . |
|
Thread Tools | |
Display Modes | |
|
|