A Windows XP help forum. PCbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » PCbanter forum » Microsoft Windows XP » Networking and the Internet with Windows XP
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

network adapters



 
 
Thread Tools Display Modes
  #1  
Old December 5th 04, 02:40 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

I have windows xp home sp1. When I go to safe mode, go to device manger, go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network cards
that is not in the computer. My network stopped working is why I even looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
.. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
.. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
.. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
.. : 0.0.0.0




Ads
  #2  
Old December 5th 04, 04:43 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 07:40:54 -0600, "Rick and Deb"
wrote:

I have windows xp home sp1. When I go to safe mode, go to device manger, go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network cards
that is not in the computer. My network stopped working is why I even looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
. : 0.0.0.0


Rick / Deb,

Please help us to help you.
1) Provide additional information in the same thread as you start with - don't
start additional threads. When we have to look back and forth in different
threads for different diagnostic data, it causes fatigue, which causes mistakes,
and hampers the diagnostic process.

2) When someone replies with an answer to your post, answer to that reply.
This is the standard for dialogue in the various forums on the internet:
Your Post #1
My answer #1
Your post #2
My answer #2
etc

When its:
Your post #1
My answer #1
Your post #2
My answer #2
Your post #3
My answer #3
It's hard to follow the thread. Please don't post this way.

How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

Now let's see what your problem may be. I see the many adapters, in the Everest
report. Please look under Settings - Network Connections - Local Area
Connection - Properties, under "This connection uses the following items:", and
list what's displayed there. It's possible that unwanted protocols may be
loaded, to start. You cannot uninstall hardware devices that have protocols
bound to them.

It also might help to know exactly what problems you're having with your
network, just in case the problem is not solely caused by excess network
adapters. Try and describe what network functions work and don't work, from
each computer. And how are all the computers connected?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #3  
Old December 5th 04, 05:57 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out
"Chuck" wrote in message
...
On Sun, 5 Dec 2004 07:40:54 -0600, "Rick and Deb"

wrote:

I have windows xp home sp1. When I go to safe mode, go to device manger,
go
to network adapters it shows about 10 adapters in it. When I try to
uninstall it says " Failed to uninstall the device. The device may be
required to boot up computer.". I know at least 3 of them are network
cards
that is not in the computer. My network stopped working is why I even
looked
there. Any suggestions would be very helpful. Here is a list of adapters
that it shows that can not be uninstalled.

Network adapters:
Direct Parallel 5.1.2535.0
D-Link DFE-530TX+ PCI Adapter 5.397.823.2001
D-Link DFE-530TX+ PCI Adapter - Packet Scheduler Miniport5.1.2535.0
D-Link DFE-530TX+ PCI Adapter #2 - Packet Scheduler
Miniport5.1.2535.0
Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler
Miniport5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (IPX) 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Here is the IP report.

Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . .
.
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection
11:
Connection-specific DNS Suffix . : Description . . . . . . . . .
.
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . .
:
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . .
.
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . .
.
. : 0.0.0.0


Rick / Deb,

Please help us to help you.
1) Provide additional information in the same thread as you start with -
don't
start additional threads. When we have to look back and forth in
different
threads for different diagnostic data, it causes fatigue, which causes
mistakes,
and hampers the diagnostic process.

2) When someone replies with an answer to your post, answer to that
reply.
This is the standard for dialogue in the various forums on the internet:
Your Post #1
My answer #1
Your post #2
My answer #2
etc

When its:
Your post #1
My answer #1
Your post #2
My answer #2
Your post #3
My answer #3
It's hard to follow the thread. Please don't post this way.

How to Compose a Good Newsgroup Post
http://dts-l.org/goodpost.htm

How to Act Smart on Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

Getting Your Post Noticed - and Answered
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

Now let's see what your problem may be. I see the many adapters, in the
Everest
report. Please look under Settings - Network Connections - Local Area
Connection - Properties, under "This connection uses the following
items:", and
list what's displayed there. It's possible that unwanted protocols may be
loaded, to start. You cannot uninstall hardware devices that have
protocols
bound to them.

It also might help to know exactly what problems you're having with your
network, just in case the problem is not solely caused by excess network
adapters. Try and describe what network functions work and don't work,
from
each computer. And how are all the computers connected?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #4  
Old December 5th 04, 07:09 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 10:57:31 -0600, "Rick and Deb" *email_address_deleted*
wrote:

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out


Rick / Deb,

If the list "This connection uses the following items:" shows nothing, then
that's part of the problem. The computer won't be on the network at all. My
list shows:
Client for Microsoft Networks
File and Printer Sharing For Microsoft Networks
QoS Packet Scheduler (optional)
Internet Protocol (TCP/IP)

Your list of 10 network cards shows, among other things, "Network adapters / WAN
Miniport (IPX)". IPX is a redundant network protocol. If you get your TCP/IP
working properly, you don't need IPX/SPX or NetBIOS.

Try again please. What is in your list? On Sparky? On Rick?

When you physically remove a network card (or other device) from the computer,
before removing the drivers for that card, and the bindings to the drivers, you
are causing a problem. You have to remove things in this order:
1) Interfaces between application software and the drivers ("bindings").
2) The drivers.
3) The hardware device.

Do it in reverse order, and the system gets confused. Put the card back in, the
system tries to load a driver for the new card, how does the system know its the
same card as before? And you get "...Adapter #2", "...Adapter #3", etc.

So start right now, and tell me exactly what works and doesn't.
1) Can you access the internet from the host (Sparky?)?
2) Can you access the internet from the client (Rick?)?
3) Can you share files between Rick and Sparky?

And while you're answering these questions (which admittedly are redundant)
PLEASE don't go pulling network cards out of either computer, or installing or
un installing drivers. If we're going to solve your problems, I have to know
how your computer is setup, and what is working, without you changing things
during the process.

And provide updated ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all c:\ipconfig.txt" into the command
window - Open c:\ipconfig.txt in Notepad, copy and paste entire contents into
your next post.

BTW, THIS is what an IPConfig should look like:
Windows IP Configuration

Host Name . . . . . . . . . . . . : MyComp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : myhome.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI For
Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-04-76-D7-E2-BA
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.001.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.001.1
DHCP Server . . . . . . . . . . . : 192.168.001.1
DNS Servers . . . . . . . . . . . : 10.201.99.11
10.201.99.33
Lease Obtained. . . . . . . . . . : Wednesday, April 16, 2003 11:53:45
Lease Expires . . . . . . . . . . : Wednesday, April 23, 2003 11:53:45

NOT this:
Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . .
.. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . : Description . . . . . . . . . .
.. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . . :
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . .
.. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . .
.. : 0.0.0.0

Do you see the difference? How much easier it is to find information in the
first example? Any idea why yours came out as the second? Help us to help you.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #5  
Old December 5th 04, 11:11 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Windows IP Configuration



Host Name . . . . . . . . . . . . : sparky

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

Physical Address. . . . . . . . . : 00-50-BA-AE-3E-74

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Autoconfiguration IP Address. . . : 169.254.116.119

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . :



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . : myhome.westell.com

Description . . . . . . . . . . . : Westell WireSpeed Dual Connect
Modem

Physical Address. . . . . . . . . : 00-0F-DB-10-F6-00

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.47

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

192.168.1.1

Lease Obtained. . . . . . . . . . : Sunday, December 05, 2004
3:53:46 PM

Lease Expires . . . . . . . . . . : Monday, December 06, 2004
3:53:46 PM

Windows IP Configuration

This other one.

Host Name . . . . . . . . . . . . : RICK

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Broadcast

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection 14:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter #2

Physical Address. . . . . . . . . : 00-50-BA-AE-46-F1

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 0.0.0.0

Subnet Mask . . . . . . . . . . . : 0.0.0.0

Default Gateway . . . . . . . . . :

DHCP Server . . . . . . . . . . . : 0.0.0.0

No they don't share files. No Rick doen't connect to internet. Yes sparky
does using usb port. When I had other protocol in they did share files. I
took everthing out butt what you said to leave, not thoching anything unless
you say to.

"Chuck" wrote in message
...
On Sun, 5 Dec 2004 10:57:31 -0600, "Rick and Deb"

*email_address_deleted*
wrote:

I have taken the network card out and it still shows all the adapters in
devise manager. In network connections it doesn't show anything. I still
can't uninstall. It may be a bad adapter card but I still need these out
before I put another card in don't I? Thanks Chuck and sorry about post.
Yesterday was crazy, network down so I couldn't get reports from client
computer to host to send to you. Then A drive went out


Rick / Deb,

If the list "This connection uses the following items:" shows nothing,

then
that's part of the problem. The computer won't be on the network at all.

My
list shows:
Client for Microsoft Networks
File and Printer Sharing For Microsoft Networks
QoS Packet Scheduler (optional)
Internet Protocol (TCP/IP)

Your list of 10 network cards shows, among other things, "Network adapters

/ WAN
Miniport (IPX)". IPX is a redundant network protocol. If you get your

TCP/IP
working properly, you don't need IPX/SPX or NetBIOS.

Try again please. What is in your list? On Sparky? On Rick?

When you physically remove a network card (or other device) from the

computer,
before removing the drivers for that card, and the bindings to the

drivers, you
are causing a problem. You have to remove things in this order:
1) Interfaces between application software and the drivers ("bindings").
2) The drivers.
3) The hardware device.

Do it in reverse order, and the system gets confused. Put the card back

in, the
system tries to load a driver for the new card, how does the system know

its the
same card as before? And you get "...Adapter #2", "...Adapter #3", etc.

So start right now, and tell me exactly what works and doesn't.
1) Can you access the internet from the host (Sparky?)?
2) Can you access the internet from the client (Rick?)?
3) Can you share files between Rick and Sparky?

And while you're answering these questions (which admittedly are

redundant)
PLEASE don't go pulling network cards out of either computer, or

installing or
un installing drivers. If we're going to solve your problems, I have to

know
how your computer is setup, and what is working, without you changing

things
during the process.

And provide updated ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all c:\ipconfig.txt" into the

command
window - Open c:\ipconfig.txt in Notepad, copy and paste entire contents

into
your next post.

BTW, THIS is what an IPConfig should look like:
Windows IP Configuration

Host Name . . . . . . . . . . . . : MyComp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : myhome.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100 PCI

For
Complete PC Management NIC (3C905C-TX)
Physical Address. . . . . . . . . : 00-04-76-D7-E2-BA
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.001.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.001.1
DHCP Server . . . . . . . . . . . : 192.168.001.1
DNS Servers . . . . . . . . . . . : 10.201.99.11
10.201.99.33
Lease Obtained. . . . . . . . . . : Wednesday, April 16, 2003

11:53:45
Lease Expires . . . . . . . . . . : Wednesday, April 23, 2003

11:53:45

NOT this:
Windows IP Configuration Host Name . . . . . . . . . . . . : RICK
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . .

..
. : Broadcast IP Routing Enabled. . . . . . . . : No WINS
Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection

11:
Connection-specific DNS Suffix . : Description . . . . . . . . .

..
. : D-Link DFE-530TX+ PCI Adapter Physical Address. . . . . . . . .

:
00-50-BA-AE-46-F1 Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . .

..
. . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . .

..
. : 0.0.0.0

Do you see the difference? How much easier it is to find information in

the
first example? Any idea why yours came out as the second? Help us to

help you.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #6  
Old December 6th 04, 03:18 AM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Sun, 5 Dec 2004 16:11:54 -0600, "Rick and Deb" *email_address_deleted*
wrote:

SNIP

No they don't share files. No Rick doen't connect to internet. Yes sparky
does using usb port. When I had other protocol in they did share files. I
took everthing out butt what you said to leave, not thoching anything unless
you say to.


OK, the light is beginning to come on.

So when you had IPX (on both computers?) you had file sharing. Which means that
the network cards must work, and must be properly connected. That's 50% of the
battle right there.

So you have to connect Rick thru Sparky cause you're using a USB modem on
Sparky. Yuck. But it should work with ICS.

Are you running ICS on Sparky ("This computer connects directly to the internet"
and "This computer provides internet service to other computers")? If you were,
the D-Link should have an ip address 192.168.0.1. With ICS on Sparky, and with
both network cards working and properly connected, Rick should get a suitable ip
address assigned.

So get ICS working on Sparky (run the wizard giving the settings above), and
rerun IPConfig on both.

Do you have firewalls on either computer? Now or in the past?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #7  
Old December 6th 04, 01:18 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Windows IP Configuration



Host Name . . . . . . . . . . . . : RICK

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Broadcast

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection 14:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter #2

Physical Address. . . . . . . . . : 00-50-BA-AE-46-F1

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 0.0.0.0

Subnet Mask . . . . . . . . . . . : 0.0.0.0

Default Gateway . . . . . . . . . :

DHCP Server . . . . . . . . . . . : 0.0.0.0

Windows IP Configuration



Host Name . . . . . . . . . . . . : sparky

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

Physical Address. . . . . . . . . : 00-50-BA-AE-3E-74

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Autoconfiguration IP Address. . . : 169.254.116.119

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . :



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . : myhome.westell.com

Description . . . . . . . . . . . : Westell WireSpeed Dual Connect
Modem

Physical Address. . . . . . . . . : 00-0F-DB-10-F6-00

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.47

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

192.168.1.1

Lease Obtained. . . . . . . . . . : Sunday, December 05, 2004
3:53:46 PM

Lease Expires . . . . . . . . . . : Monday, December 06, 2004
3:53:46 PM

I ran the wizard, still can't share files. The one thing I see different is
the node type on rick say's broadcast. Is that okay? When I go to network to
see if they will share Sparky shows it self, Rick doesn't show anything.
Thanks Chuck, keep plugging away you will figure it out. I do have another
card. It's an old linksys lan card II. I don't think xp has drivers far it
but not sure.

"Chuck" wrote in message
...
On Sun, 5 Dec 2004 16:11:54 -0600, "Rick and Deb"

*email_address_deleted*
wrote:

SNIP

No they don't share files. No Rick doen't connect to internet. Yes sparky
does using usb port. When I had other protocol in they did share files. I
took everthing out butt what you said to leave, not thoching anything

unless
you say to.


OK, the light is beginning to come on.

So when you had IPX (on both computers?) you had file sharing. Which

means that
the network cards must work, and must be properly connected. That's 50%

of the
battle right there.

So you have to connect Rick thru Sparky cause you're using a USB modem on
Sparky. Yuck. But it should work with ICS.

Are you running ICS on Sparky ("This computer connects directly to the

internet"
and "This computer provides internet service to other computers")? If you

were,
the D-Link should have an ip address 192.168.0.1. With ICS on Sparky, and

with
both network cards working and properly connected, Rick should get a

suitable ip
address assigned.

So get ICS working on Sparky (run the wizard giving the settings above),

and
rerun IPConfig on both.

Do you have firewalls on either computer? Now or in the past?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #8  
Old December 6th 04, 01:35 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Sorry, Rick's firewall is not on. Sparky's firewall is not giving me an
option to turn it on, grayed out. The firewall far the internet connection
is on far sparky.

"Rick and Deb" wrote in message
...
Windows IP Configuration



Host Name . . . . . . . . . . . . : RICK

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Broadcast

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection 14:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

#2

Physical Address. . . . . . . . . : 00-50-BA-AE-46-F1

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 0.0.0.0

Subnet Mask . . . . . . . . . . . : 0.0.0.0

Default Gateway . . . . . . . . . :

DHCP Server . . . . . . . . . . . : 0.0.0.0

Windows IP Configuration



Host Name . . . . . . . . . . . . : sparky

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

Physical Address. . . . . . . . . : 00-50-BA-AE-3E-74

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Autoconfiguration IP Address. . . : 169.254.116.119

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . :



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . : myhome.westell.com

Description . . . . . . . . . . . : Westell WireSpeed Dual Connect
Modem

Physical Address. . . . . . . . . : 00-0F-DB-10-F6-00

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.47

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

192.168.1.1

Lease Obtained. . . . . . . . . . : Sunday, December 05, 2004
3:53:46 PM

Lease Expires . . . . . . . . . . : Monday, December 06, 2004
3:53:46 PM

I ran the wizard, still can't share files. The one thing I see different

is
the node type on rick say's broadcast. Is that okay? When I go to network

to
see if they will share Sparky shows it self, Rick doesn't show anything.
Thanks Chuck, keep plugging away you will figure it out. I do have another
card. It's an old linksys lan card II. I don't think xp has drivers far it
but not sure.

"Chuck" wrote in message
...
On Sun, 5 Dec 2004 16:11:54 -0600, "Rick and Deb"

*email_address_deleted*
wrote:

SNIP

No they don't share files. No Rick doen't connect to internet. Yes

sparky
does using usb port. When I had other protocol in they did share files.

I
took everthing out butt what you said to leave, not thoching anything

unless
you say to.


OK, the light is beginning to come on.

So when you had IPX (on both computers?) you had file sharing. Which

means that
the network cards must work, and must be properly connected. That's 50%

of the
battle right there.

So you have to connect Rick thru Sparky cause you're using a USB modem

on
Sparky. Yuck. But it should work with ICS.

Are you running ICS on Sparky ("This computer connects directly to the

internet"
and "This computer provides internet service to other computers")? If

you
were,
the D-Link should have an ip address 192.168.0.1. With ICS on Sparky,

and
with
both network cards working and properly connected, Rick should get a

suitable ip
address assigned.

So get ICS working on Sparky (run the wizard giving the settings above),

and
rerun IPConfig on both.

Do you have firewalls on either computer? Now or in the past?

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.





  #9  
Old December 6th 04, 04:37 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Mon, 6 Dec 2004 06:35:01 -0600, "Rick and Deb"
wrote:

Sorry, Rick's firewall is not on. Sparky's firewall is not giving me an
option to turn it on, grayed out. The firewall far the internet connection
is on far sparky.


SNIP

I ran the wizard, still can't share files. The one thing I see different

is
the node type on rick say's broadcast. Is that okay? When I go to network

to
see if they will share Sparky shows it self, Rick doesn't show anything.
Thanks Chuck, keep plugging away you will figure it out. I do have another
card. It's an old linksys lan card II. I don't think xp has drivers far it
but not sure.


So far, I don't see that you have setup ICS on Sparky. ICS will let you share
internet service with Rick, plus it will provide network configuration for both
computers, allowing file sharing to work.

Run the network setup wizard on Sparky to setup ICS:
http://www.practicallynetworked.com/sharing/xp_ics/networksetupwiz.htm
Or manually, if you prefer:
http://www.practicallynetworked.com/sharing/xp_ics/serverbroadband.htm

And post updated IPConfig.

What is the name of the firewall on Rick? On Sparky? This could be important.

BTW, please help me here. You are now producing a nicely formatted IPConfig
from both computers. What did you do differently? I ask because a lot of folks
produce IPConfig like you did earlier (garbled), and I would like to improve my
instructions to they can produce it nicely formatted, as you are doing now.
That would be a big help to me.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #10  
Old December 6th 04, 06:42 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Ok here is what happened. I have ran this wizard a bunch of times. I checked
out your artical seen that I was doing it right, ran it again. This is the
first time this has ever happened. It said "an error occurred during
configuration of the network on this coputer. You can configure your network
manully or you can run the wizard again with different sttings". I rebooted
computer tryed again it went through that time. Went to advanced settings
tab, no ics there. Ran the wizard again came up with same error. Went to
setup manully, here is what it said. "An error occurred while internet
connection sharing was being enabled. The service cannot accept control
messages at this time." Here is IP again, rick's is the same as before.
Windows IP Configuration



Host Name . . . . . . . . . . . . : sparky

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : D-Link DFE-530TX+ PCI Adapter

Physical Address. . . . . . . . . : 00-50-BA-AE-3E-74

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Autoconfiguration IP Address. . . : 169.254.116.119

Subnet Mask . . . . . . . . . . . : 255.255.0.0

Default Gateway . . . . . . . . . :



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . : myhome.westell.com

Description . . . . . . . . . . . : Westell WireSpeed Dual Connect
Modem

Physical Address. . . . . . . . . : 00-0F-DB-10-F6-00

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.47

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

192.168.1.1

Lease Obtained. . . . . . . . . . : Monday, December 06, 2004
11:13:08 AM

Lease Expires . . . . . . . . . . : Tuesday, December 07, 2004
11:13:08 AM

Your question about report is the first time you told me to uncheck word
wrap. You have to leave it checked to get the report this way. The firewall
is what came with XP. Do they come with different ones, if so how do I
check?
Thanks Chuck

"Chuck" wrote in message
...
On Mon, 6 Dec 2004 06:35:01 -0600, "Rick and Deb"


wrote:

Sorry, Rick's firewall is not on. Sparky's firewall is not giving me an
option to turn it on, grayed out. The firewall far the internet

connection
is on far sparky.


SNIP

I ran the wizard, still can't share files. The one thing I see

different
is
the node type on rick say's broadcast. Is that okay? When I go to

network
to
see if they will share Sparky shows it self, Rick doesn't show

anything.
Thanks Chuck, keep plugging away you will figure it out. I do have

another
card. It's an old linksys lan card II. I don't think xp has drivers far

it
but not sure.


So far, I don't see that you have setup ICS on Sparky. ICS will let you

share
internet service with Rick, plus it will provide network configuration for

both
computers, allowing file sharing to work.

Run the network setup wizard on Sparky to setup ICS:
http://www.practicallynetworked.com/sharing/xp_ics/networksetupwiz.htm
Or manually, if you prefer:
http://www.practicallynetworked.com/sharing/xp_ics/serverbroadband.htm

And post updated IPConfig.

What is the name of the firewall on Rick? On Sparky? This could be

important.

BTW, please help me here. You are now producing a nicely formatted

IPConfig
from both computers. What did you do differently? I ask because a lot of

folks
produce IPConfig like you did earlier (garbled), and I would like to

improve my
instructions to they can produce it nicely formatted, as you are doing

now.
That would be a big help to me.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #11  
Old December 6th 04, 08:21 PM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Mon, 6 Dec 2004 11:42:29 -0600, "Rick and Deb"
wrote:

Ok here is what happened. I have ran this wizard a bunch of times. I checked
out your artical seen that I was doing it right, ran it again. This is the
first time this has ever happened. It said "an error occurred during
configuration of the network on this coputer. You can configure your network
manully or you can run the wizard again with different sttings". I rebooted
computer tryed again it went through that time. Went to advanced settings
tab, no ics there. Ran the wizard again came up with same error. Went to
setup manully, here is what it said. "An error occurred while internet
connection sharing was being enabled. The service cannot accept control
messages at this time." Here is IP again, rick's is the same as before.
Windows IP Configuration


SNIP

Your question about report is the first time you told me to uncheck word
wrap. You have to leave it checked to get the report this way. The firewall
is what came with XP. Do they come with different ones, if so how do I
check?


OK, maybe we have a clue. Take a look at the status of the "Internet Connection
Firewall / Internet Connection Sharing" service on Sparky, and make sure that
it's enabled ("Automatic") and running. If it's grayed out, you have a problem.

If no help yet, get PSTools (free) from
http://www.sysinternals.com/ntw2k/freeware/pstools.shtml. Install the tools
by copying into any convenient folder, and run "psservice c:\psservice.txt".
Copy and paste c:\psservice.txt into your next post.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #12  
Old December 6th 04, 11:05 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

The choices wern't grayed out but would not let me set any of then.
Your great far helping me this long. Thanks

PsService v2.12 - local and remote services viewer/controller
Copyright (C) 2001-2004 Mark Russinovich
Sysinternals - www.sysinternals.com

SERVICE_NAME: Alerter
DISPLAY_NAME: Alerter
Notifies selected users and computers of administrative alerts. If the
service is stopped, programs that use administrative alerts will not receive
them. If this service is disabled, any services that explicitly depend on it
will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ALG
DISPLAY_NAME: Application Layer Gateway Service
Provides support for 3rd party protocol plug-ins for Internet Connection
Sharing and the Internet Connection Firewall
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: AppMgmt
DISPLAY_NAME: Application Management
Provides software installation services such as Assign, Publish, and Remove.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: AudioSrv
DISPLAY_NAME: Windows Audio
Manages audio devices for Windows-based programs. If this service is
stopped, audio devices and effects will not function properly. If this
service is disabled, any services that explicitly depend on it will fail to
start.
GROUP : AudioGroup
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: BITS
DISPLAY_NAME: Background Intelligent Transfer Service
Uses idle network bandwidth to transfer data.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Browser
DISPLAY_NAME: Computer Browser
Maintains an updated list of computers on the network and supplies this list
to computers designated as browsers. If this service is stopped, this list
will not be updated or maintained. If this service is disabled, any services
that explicitly depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ccEvtMgr
DISPLAY_NAME: Symantec Event Manager
Symantec Event Manager
GROUP : Symantec Services
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ccPwdSvc
DISPLAY_NAME: Symantec Password Validation Service
(null)
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: cisvc
DISPLAY_NAME: Indexing Service
Indexes contents and properties of files on local and remote computers;
provides rapid access to files through flexible querying language.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ClipSrv
DISPLAY_NAME: ClipBook
Enables ClipBook Viewer to store information and share it with remote
computers. If the service is stopped, ClipBook Viewer will not be able to
share information with remote computers. If this service is disabled, any
services that explicitly depend on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: COMSysApp
DISPLAY_NAME: COM+ System Application
Manages the configuration and tracking of Component Object Model
(COM)+-based components. If the service is stopped, most COM+-based
components will not function properly. If this service is disabled, any
services that explicitly depend on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: CryptSvc
DISPLAY_NAME: Cryptographic Services
Provides three management services: Catalog Database Service, which confirms
the signatures of Windows files; Protected Root Service, which adds and
removes Trusted Root Certification Authority certificates from this
computer; and Key Service, which helps enroll this computer for
certificates. If this service is stopped, these management services will not
function properly. If this service is disabled, any services that explicitly
depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Dhcp
DISPLAY_NAME: DHCP Client
Manages network configuration by registering and updating IP addresses and
DNS names.
GROUP : TDI
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: dmadmin
DISPLAY_NAME: Logical Disk Manager Administrative Service
Configures hard disk drives and volumes. The service only runs for
configuration processes and then stops.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: dmserver
DISPLAY_NAME: Logical Disk Manager
Detects and monitors new hard disk drives and sends disk volume information
to Logical Disk Manager Administrative Service for configuration. If this
service is stopped, dynamic disk status and configuration information may
become out of date. If this service is disabled, any services that
explicitly depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Dnscache
DISPLAY_NAME: DNS Client
Resolves and caches Domain Name System (DNS) names for this computer. If
this service is stopped, this computer will not be able to resolve DNS names
and locate Active Directory domain controllers. If this service is disabled,
any services that explicitly depend on it will fail to start.
GROUP : TDI
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ERSvc
DISPLAY_NAME: Error Reporting Service
Allows error reporting for services and applictions running in non-standard
environments.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Eventlog
DISPLAY_NAME: Event Log
Enables event log messages issued by Windows-based programs and components
to be viewed in Event Viewer. This service cannot be stopped.
GROUP : Event log
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: EventSystem
DISPLAY_NAME: COM+ Event System
Supports System Event Notification Service (SENS), which provides automatic
distribution of events to subscribing Component Object Model (COM)
components. If the service is stopped, SENS will close and will not be able
to provide logon and logoff notifications. If this service is disabled, any
services that explicitly depend on it will fail to start.
GROUP : Network
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: FastUserSwitchingCompatibility
DISPLAY_NAME: Fast User Switching Compatibility
Provides management for applications that require assistance in a multiple
user environment.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Fax
DISPLAY_NAME: Fax
Enables you to send and receive faxes, utilizing fax resources available on
this computer or on the network.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: GhostStartService
DISPLAY_NAME: GhostStartService
Background service to allow Norton Ghost to perform priviledged operations
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: helpsvc
DISPLAY_NAME: Help and Support
Enables Help and Support Center to run on this computer. If this service is
stopped, Help and Support Center will be unavailable. If this service is
disabled, any services that explicitly depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: HidServ
DISPLAY_NAME: Human Interface Device Access
Enables generic input access to Human Interface Devices (HID), which
activates and maintains the use of predefined hot buttons on keyboards,
remote controls, and other multimedia devices. If this service is stopped,
hot buttons controlled by this service will no longer function. If this
service is disabled, any services that explicitly depend on it will fail to
start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ImapiService
DISPLAY_NAME: IMAPI CD-Burning COM Service
Manages CD recording using Image Mastering Applications Programming
Interface (IMAPI). If this service is stopped, this computer will be unable
to record CDs. If this service is disabled, any services that explicitly
depend on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Iprip
DISPLAY_NAME: RIP Listener
Listens for route updates sent by routers that use the Routing Information
Protocol version 1 (RIPv1).
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: lanmanserver
DISPLAY_NAME: Server
Supports file, print, and named-pipe sharing over the network for this
computer. If this service is stopped, these functions will be unavailable.
If this service is disabled, any services that explicitly depend on it will
fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: lanmanworkstation
DISPLAY_NAME: Workstation
Creates and maintains client network connections to remote servers. If this
service is stopped, these connections will be unavailable. If this service
is disabled, any services that explicitly depend on it will fail to start.
GROUP : NetworkProvider
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: LmHosts
DISPLAY_NAME: TCP/IP NetBIOS Helper
Enables support for NetBIOS over TCP/IP (NetBT) service and NetBIOS name
resolution.
GROUP : TDI
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Messenger
DISPLAY_NAME: Messenger
Transmits net send and Alerter service messages between clients and servers.
This service is not related to Windows Messenger. If this service is
stopped, Alerter messages will not be transmitted. If this service is
disabled, any services that explicitly depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: mnmsrvc
DISPLAY_NAME: NetMeeting Remote Desktop Sharing
Enables an authorized user to access this computer remotely by using
NetMeeting over a corporate intranet. If this service is stopped, remote
desktop sharing will be unavailable. If this service is disabled, any
services that explicitly depend on it will fail to start.
TYPE : 110 WIN32_OWN_PROCESS INTERACTIVE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: MSDTC
DISPLAY_NAME: Distributed Transaction Coordinator
Coordinates transactions that span multiple resource managers, such as
databases, message queues, and file systems. If this service is stopped,
these transactions will not occur. If this service is disabled, any services
that explicitly depend on it will fail to start.
GROUP : MS Transactions
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: MSIServer
DISPLAY_NAME: Windows Installer
Installs, repairs and removes software according to instructions contained
in .MSI files.
TYPE : 120 WIN32_SHARE_PROCESS INTERACTIVE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: navapsvc
DISPLAY_NAME: Norton AntiVirus Auto Protect Service
Handles Norton AntiVirus Auto-Protect events.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NetDDE
DISPLAY_NAME: Network DDE
Provides network transport and security for Dynamic Data Exchange (DDE) for
programs running on the same computer or on different computers. If this
service is stopped, DDE transport and security will be unavailable. If this
service is disabled, any services that explicitly depend on it will fail to
start.
GROUP : NetDDEGroup
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NetDDEdsdm
DISPLAY_NAME: Network DDE DSDM
Manages Dynamic Data Exchange (DDE) network shares. If this service is
stopped, DDE network shares will be unavailable. If this service is
disabled, any services that explicitly depend on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Netlogon
DISPLAY_NAME: Net Logon
Supports pass-through authentication of account logon events for computers
in a domain.
GROUP : RemoteValidation
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Netman
DISPLAY_NAME: Network Connections
Manages objects in the Network and Dial-Up Connections folder, in which you
can view both local area network and remote connections.
TYPE : 120 WIN32_SHARE_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Nla
DISPLAY_NAME: Network Location Awareness (NLA)
Collects and stores network configuration and location information, and
notifies applications when this information changes.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NProtectService
DISPLAY_NAME: Norton Unerase Protection
(null)
TYPE : 110 WIN32_OWN_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NtLmSsp
DISPLAY_NAME: NT LM Security Support Provider
Provides security to remote procedure call (RPC) programs that use
transports other than named pipes.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NtmsSvc
DISPLAY_NAME: Removable Storage
(null)
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: NVSvc
DISPLAY_NAME: NVIDIA Display Driver Service
Provides system and desktop level support to the NVIDIA display driver
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: PlugPlay
DISPLAY_NAME: Plug and Play
Enables a computer to recognize and adapt to hardware changes with little or
no user input. Stopping or disabling this service will result in system
instability.
GROUP : PlugPlay
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Pml Driver HPZ12
DISPLAY_NAME: Pml Driver HPZ12
(null)
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: PolicyAgent
DISPLAY_NAME: IPSEC Services
Manages IP security policy and starts the ISAKMP/Oakley (IKE) and the IP
security driver.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ProtectedStorage
DISPLAY_NAME: Protected Storage
Provides protected storage for sensitive data, such as private keys, to
prevent access by unauthorized services, processes, or users.
TYPE : 120 WIN32_SHARE_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RasAuto
DISPLAY_NAME: Remote Access Auto Connection Manager
Creates a connection to a remote network whenever a program references a
remote DNS or NetBIOS name or address.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RasMan
DISPLAY_NAME: Remote Access Connection Manager
Creates a network connection.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RDSessMgr
DISPLAY_NAME: Remote Desktop Help Session Manager
Manages and controls Remote Assistance. If this service is stopped, Remote
Assistance will be unavailable. Before stopping this service, see the
Dependencies tab of the Properties dialog box.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RemoteAccess
DISPLAY_NAME: Routing and Remote Access
Offers routing services to businesses in local area and wide area network
environments.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RpcLocator
DISPLAY_NAME: Remote Procedure Call (RPC) Locator
Manages the RPC name service database.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RpcSs
DISPLAY_NAME: Remote Procedure Call (RPC)
Provides the endpoint mapper and other miscellaneous RPC services.
GROUP : COM Infrastructure
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: RSVP
DISPLAY_NAME: QoS RSVP
Provides network signaling and local traffic control setup functionality for
QoS-aware programs and control applets.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SamSs
DISPLAY_NAME: Security Accounts Manager
Stores security information for local user accounts.
GROUP : LocalValidation
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SBService
DISPLAY_NAME: ScriptBlocking Service
(null)
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SCardDrv
DISPLAY_NAME: Smart Card Helper
Enables support for legacy non-plug and play smart-card readers used by this
computer. If this service is stopped, this computer will not support legacy
reader. If this service is disabled, any services that explicitly depend on
it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SCardSvr
DISPLAY_NAME: Smart Card
Manages access to smart cards read by this computer. If this service is
stopped, this computer will be unable to read smart cards. If this service
is disabled, any services that explicitly depend on it will fail to start.
GROUP : SmartCardGroup
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Schedule
DISPLAY_NAME: Task Scheduler
Enables a user to configure and schedule automated tasks on this computer.
If this service is stopped, these tasks will not be run at their scheduled
times. If this service is disabled, any services that explicitly depend on
it will fail to start.
GROUP : SchedulerGroup
TYPE : 120 WIN32_SHARE_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: seclogon
DISPLAY_NAME: Secondary Logon
Enables starting processes under alternate credentials. If this service is
stopped, this type of logon access will be unavailable. If this service is
disabled, any services that explicitly depend on it will fail to start.
TYPE : 120 WIN32_SHARE_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SENS
DISPLAY_NAME: System Event Notification
Tracks system events such as Windows logon, network, and power events.
Notifies COM+ Event System subscribers of these events.
GROUP : Network
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SharedAccess
DISPLAY_NAME: Internet Connection Firewall (ICF) / Internet Connection
Sharing (ICS)
Provides network address translation, addressing, name resolution and/or
intrusion prevention services for a home or small office network.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: ShellHWDetection
DISPLAY_NAME: Shell Hardware Detection
(null)
GROUP : ShellSvcGroup
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SimpTcp
DISPLAY_NAME: Simple TCP/IP Services
Supports the following TCP/IP services: Character Generator, Daytime,
Discard, Echo, and Quote of the Day.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Speed Disk service
DISPLAY_NAME: Speed Disk service
(null)
TYPE : 110 WIN32_OWN_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Spooler
DISPLAY_NAME: Print Spooler
Loads files to memory for later printing.
GROUP : SpoolerGroup
TYPE : 110 WIN32_OWN_PROCESS INTERACTIVE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: srservice
DISPLAY_NAME: System Restore Service
Performs system restore functions. To stop service, turn off System Restore
from the System Restore tab in My Computer-Properties
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SSDPSRV
DISPLAY_NAME: SSDP Discovery Service
Enables discovery of UPnP devices on your home network.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: stisvc
DISPLAY_NAME: Windows Image Acquisition (WIA)
Provides image acquisition services for scanners and cameras.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SwPrv
DISPLAY_NAME: MS Software Shadow Copy Provider
Manages software-based volume shadow copies taken by the Volume Shadow Copy
service. If this service is stopped, software-based volume shadow copies
cannot be managed. If this service is disabled, any services that explicitly
depend on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SymWSC
DISPLAY_NAME: SymWMI Service
Symantec WMI Service
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: SysmonLog
DISPLAY_NAME: Performance Logs and Alerts
Collects performance data from local or remote computers based on
preconfigured schedule parameters, then writes the data to a log or triggers
an alert. If this service is stopped, performance information will not be
collected. If this service is disabled, any services that explicitly depend
on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: TapiSrv
DISPLAY_NAME: Telephony
Provides Telephony API (TAPI) support for programs that control telephony
devices and IP based voice connections on the local computer and, through
the LAN, on servers that are also running the service.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: TermService
DISPLAY_NAME: Terminal Services
Allows multiple users to be connected interactively to a machine as well as
the display of desktops and applications to remote computers. The
underpinning of Remote Desktop (including RD for Administrators), Fast User
Switching, Remote Assistance, and Terminal Server.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: Themes
DISPLAY_NAME: Themes
Provides user experience theme management.
GROUP : UIGroup
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: TrkWks
DISPLAY_NAME: Distributed Link Tracking Client
Maintains links between NTFS files within a computer or across computers in
a network domain.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: uploadmgr
DISPLAY_NAME: Upload Manager
Manages synchronous and asynchronous file transfers between clients and
servers on the network. If this service is stopped, synchronous and
asynchronous file transfers between clients and servers on the network will
not occur. If this service is disabled, any services that explicitly depend
on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: upnphost
DISPLAY_NAME: Universal Plug and Play Device Host
Provides support to host Universal Plug and Play devices.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: UPS
DISPLAY_NAME: Uninterruptible Power Supply
Manages an uninterruptible power supply (UPS) connected to the computer.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: VSS
DISPLAY_NAME: Volume Shadow Copy
Manages and implements Volume Shadow Copies used for backup and other
purposes. If this service is stopped, shadow copies will be unavailable for
backup and the backup may fail. If this service is disabled, any services
that explicitly depend on it will fail to start.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: W32Time
DISPLAY_NAME: Windows Time
Maintains date and time synchronization on all clients and servers in the
network. If this service is stopped, date and time synchronization will be
unavailable. If this service is disabled, any services that explicitly
depend on it will fail to start.


TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: WebClient
DISPLAY_NAME: WebClient
Enables Windows-based programs to create, access, and modify Internet-based
files. If this service is stopped, these functions will not be available. If
this service is disabled, any services that explicitly depend on it will
fail to start.
GROUP : NetworkProvider
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: winmgmt
DISPLAY_NAME: Windows Management Instrumentation
Provides a common interface and object model to access management
information about operating system, devices, applications and services. If
this service is stopped, most Windows-based software will not function
properly. If this service is disabled, any services that explicitly depend
on it will fail to start.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: WmdmPmSN
DISPLAY_NAME: Portable Media Serial Number Service
Retrieves the serial number of any portable media player connected to this
computer. If this service is stopped, protected content might not be down
loaded to the device.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: WmiApSrv
DISPLAY_NAME: WMI Performance Adapter
Provides performance library information from WMI HiPerf providers.
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: wuauserv
DISPLAY_NAME: Automatic Updates
Enables the download and installation of critical Windows updates. If the
service is disabled, the operating system can be manually updated at the
Windows Update Web site.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

SERVICE_NAME: WZCSVC
DISPLAY_NAME: Wireless Zero Configuration
Provides automatic configuration for the 802.11 adapters
GROUP : TDI
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE,NOT_PAUSABLE,ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0


"Chuck" wrote in message
...
On Mon, 6 Dec 2004 11:42:29 -0600, "Rick and Deb"


wrote:

Ok here is what happened. I have ran this wizard a bunch of times. I

checked
out your artical seen that I was doing it right, ran it again. This is

the
first time this has ever happened. It said "an error occurred during
configuration of the network on this coputer. You can configure your

network
manully or you can run the wizard again with different sttings". I

rebooted
computer tryed again it went through that time. Went to advanced settings
tab, no ics there. Ran the wizard again came up with same error. Went to
setup manully, here is what it said. "An error occurred while internet
connection sharing was being enabled. The service cannot accept control
messages at this time." Here is IP again, rick's is the same as before.
Windows IP Configuration


SNIP

Your question about report is the first time you told me to uncheck word
wrap. You have to leave it checked to get the report this way. The

firewall
is what came with XP. Do they come with different ones, if so how do I
check?


OK, maybe we have a clue. Take a look at the status of the "Internet

Connection
Firewall / Internet Connection Sharing" service on Sparky, and make sure

that
it's enabled ("Automatic") and running. If it's grayed out, you have a

problem.

If no help yet, get PSTools (free) from
http://www.sysinternals.com/ntw2k/freeware/pstools.shtml. Install the

tools
by copying into any convenient folder, and run "psservice
c:\psservice.txt".
Copy and paste c:\psservice.txt into your next post.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #13  
Old December 6th 04, 11:18 PM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

Hey Chuck I was running another report pstools and it had this warning alot
through out the report here is waht it says.
[4689] Dhcp
Type: WARNING
Computer: SPARKY
Time: 12/5/2004 6:42:44 PM ID: 1007
Your computer has automatically configured the IP address for the Network
Card with network address 0050BAAE3E74. The IP address being used is
169.254.116.119.


"Chuck" wrote in message
...
On Mon, 6 Dec 2004 11:42:29 -0600, "Rick and Deb"


wrote:

Ok here is what happened. I have ran this wizard a bunch of times. I

checked
out your artical seen that I was doing it right, ran it again. This is

the
first time this has ever happened. It said "an error occurred during
configuration of the network on this coputer. You can configure your

network
manully or you can run the wizard again with different sttings". I

rebooted
computer tryed again it went through that time. Went to advanced settings
tab, no ics there. Ran the wizard again came up with same error. Went to
setup manully, here is what it said. "An error occurred while internet
connection sharing was being enabled. The service cannot accept control
messages at this time." Here is IP again, rick's is the same as before.
Windows IP Configuration


SNIP

Your question about report is the first time you told me to uncheck word
wrap. You have to leave it checked to get the report this way. The

firewall
is what came with XP. Do they come with different ones, if so how do I
check?


OK, maybe we have a clue. Take a look at the status of the "Internet

Connection
Firewall / Internet Connection Sharing" service on Sparky, and make sure

that
it's enabled ("Automatic") and running. If it's grayed out, you have a

problem.

If no help yet, get PSTools (free) from
http://www.sysinternals.com/ntw2k/freeware/pstools.shtml. Install the

tools
by copying into any convenient folder, and run "psservice
c:\psservice.txt".
Copy and paste c:\psservice.txt into your next post.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.



  #14  
Old December 7th 04, 12:34 AM
Chuck
external usenet poster
 
Posts: n/a
Default network adapters

On Mon, 6 Dec 2004 16:05:51 -0600, "Rick and Deb"
wrote:

The choices wern't grayed out but would not let me set any of then.
Your great far helping me this long. Thanks


MP. I'm learning a bit here too.

Here's what I was looking for.

SERVICE_NAME: SharedAccess
DISPLAY_NAME: Internet Connection Firewall (ICF) / Internet Connection
Sharing (ICS)
Provides network address translation, addressing, name resolution and/or
intrusion prevention services for a home or small office network.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

State is STOP_PENDING. Meaning it isn't stopped, so you can't start it, but it
isn't running either. You're gonna have to restart Sparky (hope it will shut
down successfully).

After restarting, rerun psservice as before, extract the entry for SharedAccess
(as above) and copy and paste that into your next post. Don't paste the whole
thing again - I can hear the dialup users groaning when they see 1174 lines in
your last post. :-(

As long as the service isn't running, you'll be getting an APIPA address on the
network card - don't worry about that (was that psloglist?).
http://support.microsoft.com/?id=220874

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.
  #15  
Old December 7th 04, 02:19 AM
Rick and Deb
external usenet poster
 
Posts: n/a
Default network adapters

SERVICE_NAME: SharedAccess
DISPLAY_NAME: Internet Connection Firewall (ICF) / Internet Connection
Sharing (ICS)
Provides network address translation, addressing, name resolution and/or
intrusion prevention services for a home or small office network.
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0

Yes it was loglist. It say's stopped are we getting closer?
Thanks
"Rick and Deb" wrote in message
...
Hey Chuck I was running another report pstools and it had this warning

alot
through out the report here is waht it says.
[4689] Dhcp
Type: WARNING
Computer: SPARKY
Time: 12/5/2004 6:42:44 PM ID: 1007
Your computer has automatically configured the IP address for the Network
Card with network address 0050BAAE3E74. The IP address being used is
169.254.116.119.


"Chuck" wrote in message
...
On Mon, 6 Dec 2004 11:42:29 -0600, "Rick and Deb"


wrote:

Ok here is what happened. I have ran this wizard a bunch of times. I

checked
out your artical seen that I was doing it right, ran it again. This is

the
first time this has ever happened. It said "an error occurred during
configuration of the network on this coputer. You can configure your

network
manully or you can run the wizard again with different sttings". I

rebooted
computer tryed again it went through that time. Went to advanced

settings
tab, no ics there. Ran the wizard again came up with same error. Went

to
setup manully, here is what it said. "An error occurred while internet
connection sharing was being enabled. The service cannot accept control
messages at this time." Here is IP again, rick's is the same as before.
Windows IP Configuration


SNIP

Your question about report is the first time you told me to uncheck

word
wrap. You have to leave it checked to get the report this way. The

firewall
is what came with XP. Do they come with different ones, if so how do I
check?


OK, maybe we have a clue. Take a look at the status of the "Internet

Connection
Firewall / Internet Connection Sharing" service on Sparky, and make sure

that
it's enabled ("Automatic") and running. If it's grayed out, you have a

problem.

If no help yet, get PSTools (free) from
http://www.sysinternals.com/ntw2k/freeware/pstools.shtml. Install the

tools
by copying into any convenient folder, and run "psservice
c:\psservice.txt".
Copy and paste c:\psservice.txt into your next post.

--
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
XP will not let me remove these devices in Network Adapters Section Butch Hoornstra Networking and the Internet with Windows XP 5 September 28th 04 02:04 AM
Sharing & "Entire Network" ?? Jim Networking and the Internet with Windows XP 11 September 25th 04 10:24 PM
Setting up Home Networking on Win XP turns on ICF - and stops the network working... John Hyde Networking and the Internet with Windows XP 1 August 24th 04 07:32 PM
Network Cable Unplugged Error Alan Networking and the Internet with Windows XP 2 August 23rd 04 07:36 PM
Firewire 1394 speed/connection problem Kevin Brault Networking and the Internet with Windows XP 4 August 22nd 04 10:31 PM






All times are GMT +1. The time now is 02:05 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 PCbanter.
The comments are property of their posters.